-spec addCheckTool(This, ToolId, Label, Bitmap1, [Option]) -> wx:wx_object()
                when
                    This :: wxToolBar(),
                    ToolId :: integer(),
                    Label :: unicode:chardata(),
                    Bitmap1 :: wxBitmap:wxBitmap(),
                    Option ::
                        {bmpDisabled, wxBitmap:wxBitmap()} |
                        {shortHelp, unicode:chardata()} |
                        {longHelp, unicode:chardata()} |
                        {data, wx:wx_object()}.

Adds a new check (or toggle) tool to the toolbar.

The parameters are the same as in addTool/6.

See: addTool/6

-spec addControl(This, Control, [Option]) -> wx:wx_object()
              when
                  This :: wxToolBar(),
                  Control :: wxControl:wxControl(),
                  Option :: {label, unicode:chardata()}.

Adds any control to the toolbar, typically e.g. a wxComboBox.

Remark: wxMac: labels are only displayed if wxWidgets is built with wxMAC_USE_NATIVE_TOOLBAR set to 1

-spec addRadioTool(This, ToolId, Label, Bitmap1, [Option]) -> wx:wx_object()
                when
                    This :: wxToolBar(),
                    ToolId :: integer(),
                    Label :: unicode:chardata(),
                    Bitmap1 :: wxBitmap:wxBitmap(),
                    Option ::
                        {bmpDisabled, wxBitmap:wxBitmap()} |
                        {shortHelp, unicode:chardata()} |
                        {longHelp, unicode:chardata()} |
                        {data, wx:wx_object()}.

Adds a new radio tool to the toolbar.

Consecutive radio tools form a radio group such that exactly one button in the group is pressed at any moment, in other words whenever a button in the group is pressed the previously pressed button is automatically released. You should avoid having the radio groups of only one element as it would be impossible for the user to use such button.

By default, the first button in the radio group is initially pressed, the others are not.

See: addTool/6

-spec addSeparator(This) -> wx:wx_object() when This :: wxToolBar().

Adds a separator for spacing groups of tools.

Notice that the separator uses the look appropriate for the current platform so it can be a vertical line (MSW, some versions of GTK) or just an empty space or something else.

See: addTool/6, setToolSeparation/2, addStretchableSpace/1

-spec addStretchableSpace(This) -> wx:wx_object() when This :: wxToolBar().

Adds a stretchable space to the toolbar.

Any space not taken up by the fixed items (all items except for stretchable spaces) is distributed in equal measure between the stretchable spaces in the toolbar. The most common use for this method is to add a single stretchable space before the items which should be right-aligned in the toolbar, but more exotic possibilities are possible, e.g. a stretchable space may be added in the beginning and the end of the toolbar to centre all toolbar items.

See: addTool/6, addSeparator/1, insertStretchableSpace/2

Since: 2.9.1

-spec addTool(This, Tool) -> wx:wx_object() when This :: wxToolBar(), Tool :: wx:wx_object().

Adds a tool to the toolbar.

Remark: After you have added tools to a toolbar, you must call realize/1 in order to have the tools appear.

See: addSeparator/1, addCheckTool/5, addRadioTool/5, insertTool/6, deleteTool/2, realize/1, SetDropdownMenu() (not implemented in wx)

-spec addTool(This, ToolId, Label, Bitmap, BmpDisabled) -> wx:wx_object()
           when
               This :: wxToolBar(),
               ToolId :: integer(),
               Label :: unicode:chardata(),
               Bitmap :: wxBitmap:wxBitmap(),
               BmpDisabled :: wxBitmap:wxBitmap();
       (This, ToolId, Label, Bitmap, [Option]) -> wx:wx_object()
           when
               This :: wxToolBar(),
               ToolId :: integer(),
               Label :: unicode:chardata(),
               Bitmap :: wxBitmap:wxBitmap(),
               Option :: {shortHelp, unicode:chardata()} | {kind, wx:wx_enum()}.

Adds a tool to the toolbar.

This most commonly used version has fewer parameters than the full version below which specifies the more rarely used button features.

Remark: After you have added tools to a toolbar, you must call realize/1 in order to have the tools appear.

See: addSeparator/1, addCheckTool/5, addRadioTool/5, insertTool/6, deleteTool/2, realize/1, SetDropdownMenu() (not implemented in wx)

-spec addTool(This, ToolId, Label, Bitmap, BmpDisabled, [Option]) -> wx:wx_object()
           when
               This :: wxToolBar(),
               ToolId :: integer(),
               Label :: unicode:chardata(),
               Bitmap :: wxBitmap:wxBitmap(),
               BmpDisabled :: wxBitmap:wxBitmap(),
               Option ::
                   {kind, wx:wx_enum()} |
                   {shortHelp, unicode:chardata()} |
                   {longHelp, unicode:chardata()} |
                   {data, wx:wx_object()}.

Adds a tool to the toolbar.

Remark: After you have added tools to a toolbar, you must call realize/1 in order to have the tools appear.

See: addSeparator/1, addCheckTool/5, addRadioTool/5, insertTool/6, deleteTool/2, realize/1, SetDropdownMenu() (not implemented in wx)

-spec deleteTool(This, ToolId) -> boolean() when This :: wxToolBar(), ToolId :: integer().

Removes the specified tool from the toolbar and deletes it.

If you don't want to delete the tool, but just to remove it from the toolbar (to possibly add it back later), you may use removeTool/2 instead.

Note: It is unnecessary to call realize/1 for the change to take place, it will happen immediately.

Return: true if the tool was deleted, false otherwise.

See: deleteToolByPos/2

-spec deleteToolByPos(This, Pos) -> boolean() when This :: wxToolBar(), Pos :: integer().

This function behaves like deleteTool/2 but it deletes the tool at the specified position and not the one with the given id.

-spec enableTool(This, ToolId, Enable) -> ok
              when This :: wxToolBar(), ToolId :: integer(), Enable :: boolean().

Enables or disables the tool.

Remark: Some implementations will change the visible state of the tool to indicate that it is disabled.

See: getToolEnabled/2, toggleTool/3

-spec findById(This, Id) -> wx:wx_object() when This :: wxToolBar(), Id :: integer().

Returns a pointer to the tool identified by id or NULL if no corresponding tool is found.

-spec findControl(This, Id) -> wxControl:wxControl() when This :: wxToolBar(), Id :: integer().

Returns a pointer to the control identified by id or NULL if no corresponding control is found.

-spec findToolForPosition(This, X, Y) -> wx:wx_object()
                       when This :: wxToolBar(), X :: integer(), Y :: integer().

Finds a tool for the given mouse position.

Return: A pointer to a tool if a tool is found, or NULL otherwise.

Remark: Currently not implemented in wxGTK (always returns NULL there).

-spec getMargins(This) -> {W :: integer(), H :: integer()} when This :: wxToolBar().

Returns the left/right and top/bottom margins, which are also used for inter-toolspacing.

See: setMargins/3

-spec getToolBitmapSize(This) -> {W :: integer(), H :: integer()} when This :: wxToolBar().

Returns the size of bitmap that the toolbar expects to have.

The default bitmap size is platform-dependent: for example, it is 1615 for MSW and 2424 for GTK. This size does not necessarily indicate the best size to use for the toolbars on the given platform, for this you should use wxArtProvider::GetNativeSizeHint(wxART_TOOLBAR) but in any case, as the bitmap size is deduced automatically from the size of the bitmaps associated with the tools added to the toolbar, it is usually unnecessary to call setToolBitmapSize/2 explicitly.

Remark: Note that this is the size of the bitmap you pass to addTool/6, and not the eventual size of the tool button.

See: setToolBitmapSize/2, getToolSize/1

-spec getToolEnabled(This, ToolId) -> boolean() when This :: wxToolBar(), ToolId :: integer().

Called to determine whether a tool is enabled (responds to user input).

Return: true if the tool is enabled, false otherwise.

See: enableTool/3

-spec getToolLongHelp(This, ToolId) -> unicode:charlist() when This :: wxToolBar(), ToolId :: integer().

Returns the long help for the given tool.

See: setToolLongHelp/3, setToolShortHelp/3

-spec getToolPacking(This) -> integer() when This :: wxToolBar().

Returns the value used for packing tools.

See: setToolPacking/2

-spec getToolPos(This, ToolId) -> integer() when This :: wxToolBar(), ToolId :: integer().

Returns the tool position in the toolbar, or wxNOT_FOUND if the tool is not found.

-spec getToolSeparation(This) -> integer() when This :: wxToolBar().

Returns the default separator size.

See: setToolSeparation/2

-spec getToolShortHelp(This, ToolId) -> unicode:charlist() when This :: wxToolBar(), ToolId :: integer().

Returns the short help for the given tool.

See: getToolLongHelp/2, setToolShortHelp/3

-spec getToolSize(This) -> {W :: integer(), H :: integer()} when This :: wxToolBar().

Returns the size of a whole button, which is usually larger than a tool bitmap because of added 3D effects.

See: setToolBitmapSize/2, getToolBitmapSize/1

-spec getToolState(This, ToolId) -> boolean() when This :: wxToolBar(), ToolId :: integer().

Gets the on/off state of a toggle tool.

Return: true if the tool is toggled on, false otherwise.

See: toggleTool/3

-spec insertControl(This, Pos, Control, [Option]) -> wx:wx_object()
                 when
                     This :: wxToolBar(),
                     Pos :: integer(),
                     Control :: wxControl:wxControl(),
                     Option :: {label, unicode:chardata()}.

Inserts the control into the toolbar at the given position.

You must call realize/1 for the change to take place.

See: addControl/3, insertTool/6

-spec insertSeparator(This, Pos) -> wx:wx_object() when This :: wxToolBar(), Pos :: integer().

Inserts the separator into the toolbar at the given position.

You must call realize/1 for the change to take place.

See: addSeparator/1, insertTool/6

-spec insertStretchableSpace(This, Pos) -> wx:wx_object() when This :: wxToolBar(), Pos :: integer().

Inserts a stretchable space at the given position.

See addStretchableSpace/1 for details about stretchable spaces.

See: insertTool/6, insertSeparator/2

Since: 2.9.1

-spec insertTool(This, Pos, ToolId, Label, Bitmap, [Option]) -> wx:wx_object()
              when
                  This :: wxToolBar(),
                  Pos :: integer(),
                  ToolId :: integer(),
                  Label :: unicode:chardata(),
                  Bitmap :: wxBitmap:wxBitmap(),
                  Option ::
                      {bmpDisabled, wxBitmap:wxBitmap()} |
                      {kind, wx:wx_enum()} |
                      {shortHelp, unicode:chardata()} |
                      {longHelp, unicode:chardata()} |
                      {clientData, wx:wx_object()}.

Inserts the tool with the specified attributes into the toolbar at the given position.

You must call realize/1 for the change to take place.

See: addTool/6, insertControl/4, insertSeparator/2

Return: The newly inserted tool or NULL on failure. Notice that with the overload taking tool parameter the caller is responsible for deleting the tool in the latter case.

-spec realize(This) -> boolean() when This :: wxToolBar().

This function should be called after you have added tools.

-spec removeTool(This, Id) -> wx:wx_object() when This :: wxToolBar(), Id :: integer().

Removes the given tool from the toolbar but doesn't delete it.

This allows inserting/adding this tool back to this (or another) toolbar later.

Note: It is unnecessary to call realize/1 for the change to take place, it will happen immediately.

See: deleteTool/2

-spec setMargins(This, X, Y) -> ok when This :: wxToolBar(), X :: integer(), Y :: integer().

Set the values to be used as margins for the toolbar.

Remark: This must be called before the tools are added if absolute positioning is to be used, and the default (zero-size) margins are to be overridden.

See: getMargins/1

-spec setToolBitmapSize(This, Size) -> ok
                     when This :: wxToolBar(), Size :: {W :: integer(), H :: integer()}.

Sets the default size of each tool bitmap.

The default bitmap size is 16 by 15 pixels.

Remark: This should be called to tell the toolbar what the tool bitmap size is. Call it before you add tools.

See: getToolBitmapSize/1, getToolSize/1

-spec setToolLongHelp(This, ToolId, HelpString) -> ok
                   when This :: wxToolBar(), ToolId :: integer(), HelpString :: unicode:chardata().

Sets the long help for the given tool.

Remark: You might use the long help for displaying the tool purpose on the status line.

See: getToolLongHelp/2, setToolShortHelp/3

-spec setToolPacking(This, Packing) -> ok when This :: wxToolBar(), Packing :: integer().

Sets the value used for spacing tools.

The default value is 1.

Remark: The packing is used for spacing in the vertical direction if the toolbar is horizontal, and for spacing in the horizontal direction if the toolbar is vertical.

See: getToolPacking/1

-spec setToolSeparation(This, Separation) -> ok when This :: wxToolBar(), Separation :: integer().

Sets the default separator size.

The default value is 5.

See: addSeparator/1

-spec setToolShortHelp(This, ToolId, HelpString) -> ok
                    when
                        This :: wxToolBar(), ToolId :: integer(), HelpString :: unicode:chardata().

Sets the short help for the given tool.

Remark: An application might use short help for identifying the tool purpose in a tooltip.

See: getToolShortHelp/2, setToolLongHelp/3

-spec toggleTool(This, ToolId, Toggle) -> ok
              when This :: wxToolBar(), ToolId :: integer(), Toggle :: boolean().

Toggles a tool on or off.

This does not cause any event to get emitted.

Remark: Only applies to a tool that has been specified as a toggle tool.