[erlang-questions] Erlang/OTP interpreter (erl) not found butrequired
Abhishek Ranjan
abhishek@REDACTED
Wed May 3 14:55:33 CEST 2017
No i am still getting the same error and the line
./configure –bindir=~/home/ec2-user/kerl/17.1/bin
is giving the following error too
[root@REDACTED ejabberd-17.03]# ./configure –Bindir=~/home/ec2-user/kerl/ 17.1/bin
configure: error: invalid variable name: `–Bindir'
Actually it is a amazon aws linux instance and it 's is the only option I have for now.
Any Ideas on how to make it work or any ideas on how to install ejabberd 17.03 or higher in this environment. I have already tried the binary installer and it worked at start but it didn't work on second installation.
http://stackoverflow.com/questions/43754066/issue-with-ejabberds-installation-on-amazon-aws
kindly help.
> On May 3, 2017 at 5:45 PM Nuku Ameyibor <nayibor@REDACTED> wrote:
>
> [ec2-user@REDACTED ~]$ export PATH=$PATH: ~/kerl/17.1/bin/erl
>
> this line is wrong .it should be
> export PATH=$PATH: ~/kerl/17.1/bin
>
> also in this step
> [ec2-user@REDACTED ejabberd-17.03]$ ./configure
> it should be
> ./configure –bindir=~/home/ec2-user/kerl/17.1/bin
>
> also i though you were installing on a fedora box ?
> why not try the fedora option for the erlang installation ?
>
>
>
> On Wed, May 3, 2017 at 11:35 AM, Abhishek Ranjan <abhishek@REDACTED mailto:abhishek@REDACTED > wrote:
>
> > > I actually followed it apart from the export command so after using export path command also the error still pops up that -> configure: error: Erlang/OTP interpreter (erl) not found but required
> > Complete scenario went something like this:
> >
> > [ec2-user@REDACTED ~]$ kerl list builds
> > 17.1,erlang-17.1
> > 17.1,erl
> > [ec2-user@REDACTED ~]$ export PATH=$PATH: ~/kerl/17.1/bin/erl
> > -bash: export: `/home/ec2-user/kerl/17.1/bin/erl': not a valid identifier
> >
> > [ec2-user@REDACTED ~]$ export PATH=$PATH:~/home/ec2-user/kerl/17.1/bin/erl
> > [ec2-user@REDACTED ~]$ erl
> > -bash: erl: command not found
> > [ec2-user@REDACTED ~]$ kerl active
> > No Erlang/OTP kerl installation is currently active
> > [ec2-user@REDACTED ~]$ export PATH=$PATH:~/home/ec2-user/kerl/17.1/bin/erl
> >
> >
> > [ec2-user@REDACTED ~]$ . ~/kerl/17.1/activate
> > [ec2-user@REDACTED ~]$ kerl active
> > The current active installation is:
> > /home/ec2-user/kerl/17.1
> > [ec2-user@REDACTED ~]$ erl
> > Erlang/OTP 17 [erts-6.1] [source] [64-bit] [async-threads:10] [hipe] [kernel-poll:false]
> >
> > Eshell V6.1 (abort with ^G)
> > 1> q().
> > ok
> > 2> [ec2-user@REDACTED ~]$ cd downloads/
> >
> > [ec2-user@REDACTED ejabberd-17.03]$ cd ejabberd-17.03/
> > [ec2-user@REDACTED ejabberd-17.03]$ ./configure
> > ./configure: line 1529: config.log: Permission denied
> > ./configure: line 1539: config.log: Permission denied
> > [ec2-user@REDACTED ejabberd-17.03]$ ./autogen.sh
> > autom4te: cannot open autom4te.cache/requests: Permission denied
> > aclocal: error: echo failed with exit status: 1
> > autom4te: cannot open autom4te.cache/requests: Permission denied
> > [ec2-user@REDACTED ejabberd-17.03]$ yum install automake
> > Loaded plugins: priorities, update-motd, upgrade-helper
> > You need to be root to perform this command.
> > [ec2-user@REDACTED ejabberd-17.03]$ sudo su
> > [root@REDACTED ejabberd-17.03]# yum install automake
> > Loaded plugins: priorities, update-motd, upgrade-helper
> > amzn-main | 2.1 kB 00:00
> > amzn-updates | 2.3 kB 00:00
> > Package automake-1.13.4-3.15.amzn1.noarch already installed and latest version
> > Nothing to do
> > [root@REDACTED ejabberd-17.03]# ./autogen.sh
> > [root@REDACTED ejabberd-17.03]# ./configure
> > checking whether make sets $(MAKE)... yes
> > checking for a BSD-compatible install... /usr/bin/install -c
> > checking for a sed that does not truncate output... /bin/sed
> > checking for erl... no
> > checking for erlc... /usr/bin/erlc
> > checking for epmd... /usr/bin/epmd
> > checking for erl... no
> > configure: error: Erlang/OTP interpreter (erl) not found but required
> >
> >
> > > > > On May 3, 2017 at 4:17 PM Abhishek Ranjan <abhishek@REDACTED mailto:abhishek@REDACTED > wrote:
> > >
> > > it is giving me this path "/kerl/17.1/bin/erl"
> > > which is actually inside /home/ec2-user/
> > >
> > > what I feel is that this erl should have been inside /usr/bin/ directory and instead it is inside
> > > /home/ec2-user//kerl/17.1/bin/erl
> > >
> > > So is there any way I can change this path to /usr/bin.
> > > Please tell me if I am thinking right first and if so how can this be done in linux(amazon linux or fedora).
> > >
> > >
> > > > > > > On May 3, 2017 at 4:01 PM Nuku Ameyibor <nayibor@REDACTED mailto:nayibor@REDACTED > wrote:
> > > >
> > > > @ Ranjan,
> > > >
> > > > KERL_ENABLE_PROMPT=Y
> > > > . ~/kerl/17.1/activate
> > > > They are two separate commands not one command.
> > > > Run them one after the other .
> > > > After that run
> > > > which erl
> > > > That command will show you the path to your current activated erlang version .
> > > >
> > > >
> > > >
> > > > ---------------------------------------------
> > > > From: Abhishek Ranjan mailto:abhishek@REDACTED
> > > > Sent: 5/3/2017 9:46 AM
> > > > To: Jack Tang mailto:himars@REDACTED ; Erlang-Questions Questions mailto:erlang-questions@REDACTED
> > > > Subject: Re: [erlang-questions] Erlang/OTP interpreter (erl) not found butrequired
> > > >
> > > > home/ec2-user is my home directory or should I say the default directory when I make the ssh connection to server.
> > > > so i ran : KERL_ENABLE_PROMPT=y . ~/kerl/17.1/activate
> > > > command when I was in this home directory.
> > > > I think I missed a trick here as I am not familiar with linux and how to set path in linux and that's why maybe when I go to home/ec2-user/download/ejabberd.17.03/
> > > > and run ./configure command it is giving me this error.
> > > > what I understand is the line which you are saying that I missed is the same line as
> > > > KERL_ENABLE_PROMPT=y . ~/kerl/17.1/activate
> > > > but may be I gave a wrong path or ran it from wrong place (home/ec2-user).
> > > > I followed: https://yrsdi.github.io/programming/setup-erlang-with-kerl-mac-osx/ https://yrsdi.github.io/programming/setup-erlang-with-kerl-mac-osx/
> > > > Can you gauge where I am going wrong exactly
> > > >
> > > >
> > > > > > > > > On May 3, 2017 at 3:06 PM Jack Tang <himars@REDACTED mailto:himars@REDACTED > wrote:
> > > > >
> > > > > You might miss to run `$ . /path/to/install/dir/activate`.
> > > > >
> > > > > On Wed, May 3, 2017 at 5:22 PM, Abhishek Ranjan <abhishek@REDACTED mailto:abhishek@REDACTED > wrote:
> > > > >
> > > > > > > > > > >
> > > > > > I was installing ejabberd 17.03 through source code when I found that I needed to intall Erlang 17.1 for it. I installed erlang /otp 17.1 using kerl inside the /home/ec2-user/kerl/17.1 directory.
> > > > > >
> > > > > > I then used ./autogen.sh command which ran without any output
> > > > > >
> > > > > > then: ./configure which gave this error
> > > > > >
> > > > > > configure: error: Erlang/OTP interpreter (erl) not found but required
> > > > > >
> > > > > > Can anyone help?
> > > > > >
> > > > > > Regards,
> > > > > >
> > > > > > Abhishek
> > > > > >
> > > > > >
> > > > > > _______________________________________________
> > > > > > erlang-questions mailing list
> > > > > > erlang-questions@REDACTED mailto:erlang-questions@REDACTED
> > > > > > http://erlang.org/mailman/listinfo/erlang-questions http://erlang.org/mailman/listinfo/erlang-questions
> > > > > >
> > > > > >
> > > > > > > > > > >
> > > > >
> > > > >
> > > > > --
> > > > > Jack Tang
> > > > >
> > > > >
> > > > > http://www.linkedin.com/in/jacktang http://www.linkedin.com/in/jacktang
> > > > > _______________________________________________
> > > > > erlang-questions mailing list
> > > > > erlang-questions@REDACTED mailto:erlang-questions@REDACTED
> > > > > http://erlang.org/mailman/listinfo/erlang-questions http://erlang.org/mailman/listinfo/erlang-questions
> > > > >
> > > > > > > > >
> > > >
> > > > > > >
> > >
> > > > >
> >
> > > > > _______________________________________________
> > > erlang-questions mailing list
> > > erlang-questions@REDACTED mailto:erlang-questions@REDACTED
> > > http://erlang.org/mailman/listinfo/erlang-questions http://erlang.org/mailman/listinfo/erlang-questions
> > >
> > > > >
> >
> > >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://erlang.org/pipermail/erlang-questions/attachments/20170503/670ce349/attachment.htm>
More information about the erlang-questions
mailing list