HiPE

Release Notes

Version 3.17.1

Chapters

1 HiPE Release Notes

This document describes the changes made to HiPE.

1.1  Hipe 3.17.1

Fixed Bugs and Malfunctions

  • Fix HiPE bug for binary constructs like <<X/utf8>> which could in rare cases cause faulty results or VM crash.

    This fix affects both the hipe compiler and erts runtime in an incompatible way. Old hipe compiled files need to be recompiled to load and run properly as native.

    *** POTENTIAL INCOMPATIBILITY ***

    Own Id: OTP-14850 Aux Id: PR-1664

  • The BEAM compiler chooses not to perform tailcall optimisations for some calls in tail position, for example to some built-in functions. However, when the ErLLVM HiPE backend is used, LLVM may choose to perform tailcall optimisation on these calls, breaking the expected semantics.

    To preserve the precise semantics exhibited by BEAM, the 'notail' marker, present in LLVM since version 3.8, is added to call instructions that BEAM has not turned into tail calls, which inhibits LLVM from performing tail-call optimisation in turn.

    Own Id: OTP-14886

1.2  Hipe 3.17

Fixed Bugs and Malfunctions

  • Fix bug for hipe compiled code using <<X/utf32>> binary construction that could cause faulty result or even VM crash.

    On architectures other than x86_64, code need to be recompiled to benefit from this fix.

    Own Id: OTP-14740

Improvements and New Features

  • Added documentation about limitations of hipe compared to beam compiled code.

    Own Id: OTP-14767

1.3  Hipe 3.16.1

Fixed Bugs and Malfunctions

  • Fix a bug regarding map types that caused Dialyzer to go into an infinite loop. A consequence of the fix is that compound map keys such as maps and tuples sometimes are handled with less precision than before.

    Own Id: OTP-14572 Aux Id: seq13319

Improvements and New Features

  • General Unicode improvements.

    Own Id: OTP-14462

1.4  Hipe 3.16

Fixed Bugs and Malfunctions

  • Fix hipe compiler flags o0 and o1 that have previously been ignored by mistake.

    Own Id: OTP-13862 Aux Id: PR-1154

  • Fix LLVM backend to not convert all remote calls to own module, like ?MODULE:foo(), into local calls.

    Own Id: OTP-13983

  • Hipe optional LLVM backend does require LLVM version 3.9 or later as older versions forced strong dependencies on erts internals structures.

    Own Id: OTP-14238

  • Fix a bug that has been seen causing failed loading of hipe compiled modules on NetBSD due to unaligned data pointers.

    Own Id: OTP-14302 Aux Id: ERL-376, PR-1386

  • Fix miscompilation bug in hipe that could cause wrong function clause to be called from non-tail calls, where the return value is unused, if the right function clause is only reachable from those non-tail calls.

    Own Id: OTP-14306 Aux Id: ERL-278, PR-1392

Improvements and New Features

  • Improve hipe compilation time for large functions.

    Own Id: OTP-13810 Aux Id: PR-1124

  • Replaced usage of deprecated symbolic time unit representations.

    Own Id: OTP-13831 Aux Id: OTP-13735

  • Speed up hipe compile time register allocation for larger function.

    Own Id: OTP-13879

  • Various code generation improvements.

    Own Id: OTP-14261 Aux Id: PR-1360

  • Improve hipe compiler to generate code with better CPU register utilization at runtime by the use of 'Live Range Splitting' techniques.

    Own Id: OTP-14293 Aux Id: PR-1380

  • Allow HiPE to run on VM built with --enable-m32-build.

    Own Id: OTP-14330 Aux Id: PR-1397

1.5  Hipe 3.15.4

Fixed Bugs and Malfunctions

  • Fix a bug concerning parameterized opaque types.

    Own Id: OTP-14130

  • Fixed xml issues in old release notes

    Own Id: OTP-14269

1.6  Hipe 3.15.3

Fixed Bugs and Malfunctions

  • Fix flow control bug in hipe compiler that may cause compile time crash.

    Own Id: OTP-13965 Aux Id: PR-1253

  • Fix bug in native compilation of bitstring pattern matching causing erroneous runtime matching result. The bug only affects code containing constant-valued segments whose size is expressed in bits; it is triggered when the pattern matching against these segments fails (i.e., when the next clause needs to be tried).

    Own Id: OTP-14005

  • Workaround in HiPE LLVM backend for a bug in LLVM 3.9. The bug could cause LLVM-compiled modules to be rejected during loading with a badarg exception in hipe_bifs:enter_sdecs/1, but also cause corruption or segmentation faults i runtime.

    Own Id: OTP-14027 Aux Id: ERL-292, PR-1237

  • Fix a bug in HiPE LLVM backend involving incorrect type tests of atoms sometimes causing incorrect behaviour or even segfaults.

    Own Id: OTP-14028 Aux Id: PR-1237

1.7  Hipe 3.15.2

Fixed Bugs and Malfunctions

  • Fixed various hipe compiler backend bugs affecting mostly ARM and SPARC.

    Own Id: OTP-13846 Aux Id: PR-1146

  • Fixed some Dialyzer warnings and code cleanup for the Sparc compiler backend.

    Own Id: OTP-13861 Aux Id: PR-1148

  • Fix erl_bif_types opaque bug.

    Own Id: OTP-13878 Aux Id: PR-1161, ERL-249

Improvements and New Features

  • Fix erl_types opaque match order

    Own Id: OTP-13876

1.8  Hipe 3.15.1

Fixed Bugs and Malfunctions

  • HiPE compiler crashed, during compilation, in some cases that involved inlining of float operations on complicated control flow graphs.

    Own Id: OTP-13407 Aux Id: PR-984

  • Various fixes and improvements to the HiPE LLVM backend.

    • Add support for LLVM 3.7 and 3.8 in the HiPE/LLVM x86_64 backend
    • Reinstate support for the LLVM backend on x86 (works OK for LLVM 3.5 to 3.7 -- LLVM 3.8 has a bug that prevents it from generating correct native code on x86)

    Own Id: OTP-13626

Improvements and New Features

  • Elimination of maps:is_key/2 calls to HiPE

    Own Id: OTP-13625 Aux Id: PR-1069

1.9  Hipe 3.15

Fixed Bugs and Malfunctions

  • Fix pretty printing of Core Maps

    Literal maps could cause Dialyzer to crash when pretty printing the results.

    Own Id: OTP-13238

  • Dialyzer warnings removed.

    Own Id: OTP-13379

Improvements and New Features

  • Fix HiPE ErLLVM code generation for pattern matching with UTF binaries.

    Own Id: OTP-13269

  • Fix various binary construction inconsistencies for hipe compiled code.

    • Passing bad field sizes to binary constructions would throw badarith rather than badarg. Worse, in guards, when the unit size of the field was 1, the exception would leak rather than failing the function clause match.
    • Passing bignums as field sizes to binary constructions would always fail (and always with badarg).
    • A bug in bs_init_bits that cased binary constructions to fail with system_limit if they were at least 1/8th of the actual limit.
    • Compiler crashes when matches against an integer literal whose size fits an unsigned word, but not a signed word or matches against an integer literal that whose size is larger than the largest allowed bignum.
    • Very large binary constructions that should fail with system_limit could instead fail with badarg or even succeed with a faulty result.
    • Add missing check for unit size match when inserting a binary. For example, a faulty expression like <<<<1:7>>/binary>> would succeed.

    Own Id: OTP-13272

1.10  Hipe 3.14

Fixed Bugs and Malfunctions

  • Fix hipe bug causing segfaults when native code constructs binaries starting with a zero-length integer field.

    Own Id: OTP-13048

  • Reintroduce the erlang:make_fun/3 BIF in erl_bif_types.

    Own Id: OTP-13068

  • In certain cases of matching with very big binaries, the HiPE compiler generated code that would fail the match, even in cases that the matching was successful. The problem was more quite noticeable on 32-bit platforms.

    Own Id: OTP-13092

Improvements and New Features

  • mikpe/hipe_x86_signal-musl-support

    Own Id: OTP-13159

1.11  Hipe 3.13

Fixed Bugs and Malfunctions

  • Fix bugs concerning erlang:abs/1.

    Own Id: OTP-12948

  • Fix a bug concerning lists:keydelete/3 with union and opaque types.

    Own Id: OTP-12949

  • A beam file compiled by hipe for an incompatible runtime system was sometimes not rejected by the loader, which could lead to vm crash. This fix will also allow the same hipe compiler to be used by both normal and debug-built vm.

    Own Id: OTP-12962

Improvements and New Features

  • New function hipe:erts_checksum/0 which returns a value identifying the target runtime system for the compiler. Used by dialyzer for its beam cache directory.

    Own Id: OTP-12963 Aux Id: OTP-12962, OTP-12964

1.12  Hipe 3.12

Fixed Bugs and Malfunctions

  • Fix a minor bug in the handling of opaque types.

    Own Id: OTP-12666

  • Fix hipe bug when matching a "writable" binary. The bug has been seen to sometimes cause a failed binary matching of a correct utf8 character, but other symptoms are also possible.

    Own Id: OTP-12667

  • Optimizations and code cleanup in hipe code loader.

    Own Id: OTP-12816

Improvements and New Features

  • Improved error handling when memory allocation for HiPE code fails.

    Own Id: OTP-12448

  • Allow use of complete interface of cerl_pmatch module

    Own Id: OTP-12794

1.13  Hipe 3.11.3

Fixed Bugs and Malfunctions

  • Fix HiPE for ARM when Erlang VM is compiled for Thumb execution mode. This was a problem on e.g. Ubuntu which configures its system GCC to generate Thumb by default.

    Own Id: OTP-12405

  • Reduced lock contention of dynamic function lookups (like apply) from hipe compiled code.

    Own Id: OTP-12557

Improvements and New Features

  • Fix two bugs in HiPE compiler regarding floating-points, both leading to crash during compilation. The target-specific code generators failed to handle integer to floating-point conversion instructions with constant operands. The middle-end could use an incorrect representation for copies between floating-point registers.

    Own Id: OTP-12413

  • Improved error handling when memory allocation for HiPE code fails.

    Own Id: OTP-12448

1.14  Hipe 3.11.2

Fixed Bugs and Malfunctions

  • Fixed internal elf_format hrl file to contain valid erlang

    Own Id: OTP-12322

1.15  Hipe 3.11.1

Fixed Bugs and Malfunctions

  • The pretty-printing of bitstrings has been corrected.

    Own Id: OTP-12015

  • A bug concerning is_record/2,3 has been fixed, as well as some cases where Dialyzer could crash due to reaching system limits.

    Own Id: OTP-12018

1.16  Hipe 3.11

Fixed Bugs and Malfunctions

  • A Dialyzer crash involving analysis of Map types has now been fixed.

    Own Id: OTP-11947

Improvements and New Features

  • Handle Maps instructions get_map_elements, put_map_assoc, put_map_exact in HiPE compiler.

    Own Id: OTP-11900

1.17  Hipe 3.10.3

Fixed Bugs and Malfunctions

  • Fix compilation with 'no_remove_comments' (Thanks to Johannes Weißl)

    Own Id: OTP-11564

  • Application upgrade (appup) files are corrected for the following applications:

    asn1, common_test, compiler, crypto, debugger, dialyzer, edoc, eldap, erl_docgen, et, eunit, gs, hipe, inets, observer, odbc, os_mon, otp_mibs, parsetools, percept, public_key, reltool, runtime_tools, ssh, syntax_tools, test_server, tools, typer, webtool, wx, xmerl

    A new test utility for testing appup files is added to test_server. This is now used by most applications in OTP.

    (Thanks to Tobias Schlager)

    Own Id: OTP-11744

  • There is now a test suite for the Hipe application

    Own Id: OTP-11748

  • Support for a LLVM backend has been added in HiPE

    Own Id: OTP-11801

Improvements and New Features

  • The pre-defined types array/0, dict/0, digraph/0, gb_set/0, gb_tree/0, queue/0, set/0, and tid/0 have been deprecated. They will be removed in Erlang/OTP 18.0.

    Instead the types array:array/0, dict:dict/0, digraph:graph/0, gb_set:set/0, gb_tree:tree/0, queue:queue/0, sets:set/0, and ets:tid/0 can be used. (Note: it has always been necessary to use ets:tid/0.)

    It is allowed in Erlang/OTP 17.0 to locally re-define the types array/0, dict/0, and so on.

    New types array:array/1, dict:dict/2, gb_sets:set/1, gb_trees:tree/2, queue:queue/1, and sets:set/1 have been added.

    A compiler option, nowarn_deprecated_type, has been introduced. By including the attribute

    -compile(nowarn_deprecated_type).

    in an Erlang source file, warnings about deprecated types can be avoided in Erlang/OTP 17.0.

    The option can also be given as a compiler flag:

    erlc +nowarn_deprecated_type file.erl

    Own Id: OTP-10342

  • EEP43: New data type - Maps

    With Maps you may for instance:

    M0 = #{ a => 1, b => 2}, % create associations
    M1 = M0#{ a := 10 }, % update values
    M2 = M1#{ "hi" => "hello"}, % add new associations
    #{ "hi" := V1, a := V2, b := V3} = M2. % match keys with values

    For information on how to use Maps please see Map Expressions in the Reference Manual.

    The current implementation is without the following features:

    No variable keys
    No single value access
    No map comprehensions

    Note that Maps is experimental during OTP 17.0.

    Own Id: OTP-11616

  • Parameterized opaque types have been introduced.

    Own Id: OTP-11625

  • Add support for the compilation of the is_map/1 and map_size/1 guards to native code.

    Own Id: OTP-11831

1.18  Hipe 3.10.2.2

Fixed Bugs and Malfunctions

  • Fixed a dialyzer crash when using remote types in the tail position of a maybe_improper_list/2 type. Thanks to Kostis Sagonas

    Own Id: OTP-11374

1.19  Hipe 3.10.2.1

Improvements and New Features

  • The encoding of the notes.xml file has been changed from latin1 to utf-8 to avoid future merge problems.

    Own Id: OTP-11310

1.20  Hipe 3.10.2

Improvements and New Features

  • Fix the title of hipe_app documentation page. Thanks to Loïc Hoguin.

    Own Id: OTP-10904

  • Fix native code compiler crash involving bs_match_string. Thanks to Kostis Sagonas.

    Own Id: OTP-10985

  • Loosen the assumptions of code that handles escaping functions. Thanks to Kostis Sagonas

    Own Id: OTP-11031

1.21  Hipe 3.10.1

Fixed Bugs and Malfunctions

  • Bug fixed in hipe to where it did not allow unicode code points 16#FFFE and 16#FFFF in bit syntax in natively compiled modules.

    Own Id: OTP-10867

  • Fix bug in hipe compiled code related to the handling of is_number/1. (Thanks to Sebastian Egner and Johannes Weißl for minimal test code and Kostis for quick patch)

    Own Id: OTP-10897

1.22  Hipe 3.10

Fixed Bugs and Malfunctions

  • The type ascii_string() in the base64 module has been corrected. The type file:file_info() has been cleaned up. The type file:fd() has been made opaque in the documentation.

    Own Id: OTP-10624 Aux Id: kunagi-352 [263]

Improvements and New Features

  • Support for Unicode has been implemented.

    Own Id: OTP-10302

  • Where necessary a comment stating encoding has been added to Erlang files. The comment is meant to be removed in Erlang/OTP R17B when UTF-8 becomes the default encoding.

    Own Id: OTP-10630

  • Update .gitignore (lib/hipe/boot_ebin). Thanks to Tuncer Ayaz.

    Own Id: OTP-10705

1.23  Hipe 3.9.3

Fixed Bugs and Malfunctions

  • A faulty spec for process_info/2 could cause false dialyzer warnings. The spec is corrected.

    Own Id: OTP-10584

1.24  Hipe 3.9.2

Fixed Bugs and Malfunctions

  • Correct handling of type names in contracts. Fix crash related to contract checking. Do not rewrite unchanged PLT.

    Own Id: OTP-10083

  • Changes in comments and minor code cleanups

    Thanks to Kostis Sagonas.

    Own Id: OTP-10230

Improvements and New Features

  • Remove all code, documentation, options and diagnostic functions which were related to the experimental hybrid heap implementation.

    Own Id: OTP-10105

  • Bugs in erl_types:t_inf() (HiPE) and in dialyzer_dataflow (Dialyzer) have been fixed.

    Own Id: OTP-10191

1.25  Hipe 3.9.1

Fixed Bugs and Malfunctions

  • References to is_constant/1 (which was removed in the R12 release) has been removed from documentation and code.

    Own Id: OTP-6454 Aux Id: seq10407

  • Fixed a discrepancy in compile_info

    The BEAM disassembler used the atom 'none' to signify the absence of a compile_info chunk in a .beam file. This clashed with the type declaration of the compile_info field of a #beam_file{} record as containing a list. Now [] signifies the absence of this chunk. This simplifies the code and avoids a dialyzer warning.

    Own Id: OTP-9917

  • Make dialyzer recognize the process_flag option sensitive add missing specs to documentation (Thanks to Tobias Schlager)

    Own Id: OTP-9923

  • Remove hipe_ceach from hipe.app.src to fix reltool-generated release startup. (Thanks to Tim Stewart)

    Own Id: OTP-9939

1.26  Hipe 3.9

Fixed Bugs and Malfunctions

    • No warnings for underspecs with remote types

    • Fix crash in Typer

    • Fix Dialyzer's warning for its own code

    • Fix Dialyzer's warnings in HiPE

    • Add file/line info in a particular Dialyzer crash

    • Update inets test results

    Own Id: OTP-9758

    • Correct callback spec in application module

    • Refine warning about callback specs with extra ranges

    • Cleanup autoimport compiler directives

    • Fix Dialyzer's warnings in typer

    • Fix Dialyzer's warning for its own code

    • Fix bug in Dialyzer's behaviours analysis

    • Fix crash in Dialyzer

    • Variable substitution was not generalizing any unknown variables.

    Own Id: OTP-9776

Improvements and New Features

  • Possible to run HiPE without floating point exceptions (FPE). Useful on platforms that lack reliable FPE. Slower float operations compared to HiPE with FPE.

    Own Id: OTP-9724

  • HiPE compiler: The possibility to compile and load selected functions from a module has been removed.

    *** POTENTIAL INCOMPATIBILITY ***

    Own Id: OTP-9751

  • filename:find_src/1,2 will now work on stripped BEAM files (reported by Per Hedeland). The HiPE compiler will also work on stripped BEAM files. The BEAM compiler will no longer include compilation options given in the source code itself in M:module_info(compile) (because those options will be applied anyway if the module is re-compiled).

    Own Id: OTP-9752

  • Optimize erl_types:t_unify().

    Own Id: OTP-9768

1.27  Hipe 3.8.1

Fixed Bugs and Malfunctions

  • Clean up hipe.hrl.src (Thanks to Tuncer Ayaz)

    Own Id: OTP-9511

  • Fix bug with binary pattern matching of floats of variable size

    Pattern matching of floats with variable size (<<F:S/float>>) did always fail. Judging from similar code for ints, this bug is simply a typo.(Thanks to Paul Guyot)

    Own Id: OTP-9556

  • Quote atoms if necessary in types

    Atoms in some occurrences were not correctly quoted when formatted to strings, for instance by the typer program (Thanks to Tomas Abrahamsson)

    Update Dialyzer's reference results

    Own Id: OTP-9560

  • Fix typer's crash for nonexisting files Remove unused macro Fix bug in dataflow Decrease tuple arity limit This fixes a memory related crash.

    Own Id: OTP-9597

Improvements and New Features

  • Types for several BIFs have been extended/corrected. Also the types for types for lists:keyfind/3, lists:keysearch/3, and lists:keyemember/3 have been corrected. The incorrect/incomplete types could cause false dialyzer warnings.

    Own Id: OTP-9496

1.28  Hipe 3.8

Fixed Bugs and Malfunctions

  • Fix hipe bug causing minor heap corruption related to binary matching. The bug has not been confirmed as the cause of any actual fault symptom.

    Own Id: OTP-9182

  • Enable HiPE by default when compiling for PPC64

    Own Id: OTP-9198

  • Fix handling of <<_:N,_:_*M>> type expressions Fix the argument of erlang:list_to_bitstring/1 Remove unneeded function 'sequence/2' Same functionality provided by string:join/2.

    Own Id: OTP-9277

1.29  Hipe 3.7.9

Fixed Bugs and Malfunctions

  • Fix erroneous fail info of a hipe_bs_primop

    Own Id: OTP-9036

  • The change fixes a bug in the translation of 'bs_add' BEAM instruction to HiPE's Icode representation. When these instructions appeared in a guard context the previous translation was obviously buggy.

    Own Id: OTP-9044

  • Sanitize the specs of the code module

    After the addition of unicode_binary() to the file:filename() type, dialyzer started complaining about erroneous or incomplete specs in some functions of the 'code' module. The culprit was hard-coded information in erl_bif_types for functions of this module, which were not updated. Since these functions have proper specs these days and code duplication (pun intended) is never a good idea, their type information was removed from erl_bif_types.

    While doing this, some erroneous comments were fixed in the code module and also made sure that the code now runs without dialyzer warnings even when the -Wunmatched_returns option is used.

    Some cleanups were applied to erl_bif_types too.

    Own Id: OTP-9100

  • Fix bug in the simplification of inexact comparisons

    On 31/1/2011 Paul Guyot reported a bug in the native code compilation of inexact equality/inequality tests between floats and integers. The relevant test was:

    f(X) -> Y = X / 2, Y == 0.

    and hipe erroneously evaluated the calls f(0) and f(0.0) to 'false'.

    The culprit was in the simplification code of the Icode range analysis which used an erroneous test (lists:any/1 instead of lists:all/1).

    Own Id: OTP-9101

  • Document exiting and garbage_collecting process statuses

    Own Id: OTP-9102

  • Remove hipe constants pool

    Hipe constants used to be allocated within a single, fixed-size pool for interaction with the garbage collector. However, the garbage collector no longer depends on constants being allocated within a single pool, and the fixed size of the pool both meant unnecessary allocations on most deployments and crashes on deployments requiring more constants.

    The code was simplified to directly invoke erts_alloc. Debugging and undocumented function hipe_bifs:show_literals/0 was removed (it returned true and output text to the console), and debugging and undocumented function hipe_bifs:constants_size/0 was rewritten with a global to count the size of allocated constants.

    Own Id: OTP-9128

1.30  Hipe 3.7.8.1

Fixed Bugs and Malfunctions

  • Several type specifications for standard libraries were wrong in the R14B01 release. This is now corrected. The corrections concern types in re,io,filename and the module erlang itself.

    Own Id: OTP-9008

1.31  Hipe 3.7.8

Improvements and New Features

  • Compiler warnings were eliminated.

    Own Id: OTP-8855

1.32  Hipe 3.7.7

Fixed Bugs and Malfunctions

  • The HiPE compiler could crash when compiling certain modules (the bug has been latent, and been exposed by new optimizations introduced in the BEAM compiler in R14A). (Thanks to Mikael Pettersson.)

    Own Id: OTP-8800

  • hipe:load/1 was broken. (Thanks to Paul Guyot.)

    Own Id: OTP-8802

1.33  Hipe 3.7.6

Improvements and New Features

  • receive statements that can only read out a newly created reference are now specially optimized so that it will execute in constant time regardless of the number of messages in the receive queue for the process. That optimization will benefit calls to gen_server:call(). (See gen:do_call/4 for an example of a receive statement that will be optimized.)

    Own Id: OTP-8623

  • Various changes to dialyzer-related files for R14.

    - Dialyzer properly supports the new attribute -export_type and checks that remote types only refer to exported types. A warning is produced if some files/applications refer to types defined in modules which are neither in the PLT nor in the analyzed applications.

    - Support for detecting data races involving whereis/1 and unregister/1.

    - More precise identification of the reason(s) why a record construction violates the types declared for its fields.

    - Fixed bug in the handling of the 'or' guard.

    - Better handling of the erlang:element/2 BIF.

    - Complete handling of Erlang BIFs.

    Own Id: OTP-8699

  • eprof has been reimplemented with support in the Erlang virtual machine and is now both faster (i.e. slows down the code being measured less) and scales much better. In measurements we saw speed-ups compared to the old eprof ranging from 6 times (for sequential code that only uses one scheduler/core) up to 84 times (for parallel code that uses 8 cores).

    Note: The API for the eprof has been cleaned up and extended. See the documentation.

    *** POTENTIAL INCOMPATIBILITY ***

    Own Id: OTP-8706

1.34  Hipe 3.7.5

Improvements and New Features

  • The documentation is now possible to build in an open source environment after a number of bugs are fixed and some features are added in the documentation build process.

    - The arity calculation is updated.

    - The module prefix used in the function names for bif's are removed in the generated links so the links will look like "http://www.erlang.org/doc/man/erlang.html#append_element-2" instead of "http://www.erlang.org/doc/man/erlang.html#erlang:append_element-2".

    - Enhanced the menu positioning in the html documentation when a new page is loaded.

    - A number of corrections in the generation of man pages (thanks to Sergei Golovan)

    - The legal notice is taken from the xml book file so OTP's build process can be used for non OTP applications.

    Own Id: OTP-8343

1.35  Hipe 3.7.4

Improvements and New Features

  • The documentation is now built with open source tools (xsltproc and fop) that exists on most platforms. One visible change is that the frames are removed.

    Own Id: OTP-8201

  • Misc updates.

    Own Id: OTP-8301

1.36  Hipe 3.7.3

Improvements and New Features

  • Various small bugs (one involving the handling of large binaries) were corrected and some additions to its functionality and/or code cleanups were done.

    Own Id: OTP-8189

1.37  Hipe 3.7.2

Improvements and New Features

  • Miscellaneous updates.

    Own Id: OTP-8038

1.38  Hipe 3.7.1

Improvements and New Features

  • Minor updates and bug fixes.

    Own Id: OTP-7958

1.39  Hipe 3.7

Improvements and New Features

  • Miscellaneous updates.

    Own Id: OTP-7877

1.40  Hipe 3.6.9

Improvements and New Features

  • The --disable-hipe option for the configure will now completely disable the hipe run-time in the emulator, as is the expected behaviour.

    Own Id: OTP-7631

1.41  Hipe 3.6.8

Improvements and New Features

  • Minor updates.

    Own Id: OTP-7522

1.42  Hipe 3.6.7

Improvements and New Features

  • Minor changes.

    Own Id: OTP-7388

1.43  Hipe 3.6.6

Fixed Bugs and Malfunctions

  • A fix for an #include problem which caused the FP exception test to fail unnecessarily on debian/glibc-2.7/x86 systems.

    Added SIGFPE loop detection to the FP exception test. This prevents the test from looping indefinitely, which could happen when the CPU is supported (so we can enable FP exceptions on it) but the OS isn't (so we can't write a proper SIGFPE handler). x86 on an unsupported OS is known to have had this problem.

    Own Id: OTP-7254

Improvements and New Features

  • HiPE now also supports little-endian ARM processors.

    Own Id: OTP-7255

1.44  Hipe 3.6.5

Fixed Bugs and Malfunctions

  • HIPE: Corrected the choice of interface to the send/3 and setnode/3 BIFs for native-compiled code. Using the incorrect interface could, in unusual circumstances, lead to random runtime errors.

    Own Id: OTP-7067

Improvements and New Features

  • The HiPE compiler's SPARC backend has been rewritten, improving its correctness and long-term maintainability.

    Own Id: OTP-7133

1.45  Hipe 3.6.3

Improvements and New Features

  • Minor Makefile changes.

    Own Id: OTP-6689

  • Miscellanous updates.

    Own Id: OTP-6738

1.46  Hipe 3.6.2

Improvements and New Features

  • Miscellanous improvements.

    Own Id: OTP-6577

1.47  Hipe 3.6.1.1

Fixed Bugs and Malfunctions

  • Dialyzer could fail to analyze certain beam files that used try/catch.

    Own Id: OTP-6449 Aux Id: seq10563

1.48  Hipe 3.6.1

Improvements and New Features

  • HiPE runtime system:

    * added notes about supported systems to README

    * support 32-bit x86 on FreeBSD

    * autoenable HiPE on FreeBSD (32-bit x86) and Solaris (64-bit x86)

    * updated x86 runtime system to support glibc-2.5

    * work around probable gcc-4.1.1 bug affecting the x86 runtime system

    HiPE compiler:

    * improved performance of integer multiplications on all platforms

    * corrected a code optimisation error in R11B-2 that broke some bsl/bsr operations on all platforms

    * corrected a type error in the ARM backend which could cause the compiler to crash

    * corrected an error in the SPARC backend's naive register allocator which could throw the compiler into an infinite loop

    Own Id: OTP-6423

1.49  Hipe 3.6.0

Improvements and New Features

  • Support for native code on Solaris 10/AMD64.

    Support for native code on FreeBSD/AMD64.

    Native code now handles external funs (fun M:F/A). Native code can now also apply so-called tuple-funs ({M,F}). (Tuple funs are NOT recommended for new code; they are deprecated and will be removed in some future release.)

    Own Id: OTP-6305

1.50  Hipe 3.5.6

Improvements and New Features

  • Improved compilation of receives for the SMP runtime system.

    Improved code quality in HiPE compiler on ARM.

    Fix bug in handling of re-raised exceptions in try-catch.

    (HiPE loader) When native code is incompatible with the current runtime system, fall back to loading the BEAM code.

    Own Id: OTP-6127

Copyright © 2006-2018 Ericsson AB. All Rights Reserved.