View Source digraph (stdlib v6.0)

This module provides a version of labeled directed graphs ("digraphs").

The digraphs managed by this module are stored in ETS tables. That implies the following:

  • Only the process that created the digraph is allowed to update it.
  • Digraphs will not be garbage collected. The ETS tables used for a digraph will only be deleted when delete/1 is called or the process that created the digraph terminates.
  • A digraph is a mutable data structure.

What makes the graphs provided here non-proper directed graphs is that multiple edges between vertices are allowed. However, the customary definition of directed graphs is used here.

  • A directed graph (or just "digraph") is a pair (V, E) of a finite set V of vertices and a finite set E of directed edges (or just "edges"). The set of edges E is a subset of V × V (the Cartesian product of V with itself).

    In this module, V is allowed to be empty. The so obtained unique digraph is called the empty digraph. Both vertices and edges are represented by unique Erlang terms.

  • Digraphs can be annotated with more information. Such information can be attached to the vertices and to the edges of the digraph. An annotated digraph is called a labeled digraph, and the information attached to a vertex or an edge is called a label. Labels are Erlang terms.

  • An edge e = (v, w) is said to emanate from vertex v and to be incident on vertex w.

  • The out-degree of a vertex is the number of edges emanating from that vertex.

  • The in-degree of a vertex is the number of edges incident on that vertex.

  • If an edge is emanating from v and incident on w, then w is said to be an out-neighbor of v, and v is said to be an in-neighbor of w.

  • A path P from v[1] to v[k] in a digraph (V, E) is a non-empty sequence v[1], v[2], ..., v[k] of vertices in V such that there is an edge (v[i],v[i+1]) in E for 1 <= i < k.

  • The length of path P is k-1.

  • Path P is simple if all vertices are distinct, except that the first and the last vertices can be the same.

  • Path P is a cycle if the length of P is not zero and v[1] = v[k].

  • A loop is a cycle of length one.

  • A simple cycle is a path that is both a cycle and simple.

  • An acyclic digraph is a digraph without cycles.

See Also

digraph_utils, ets

Summary

Types

The error reason for when an edge could not be added to a graph.

Serves as the identifier or "name" of an edge. This is distinct from an edge "label" which attaches ancillary information to the edge rather than identifying the edge itself.

A digraph as returned by new/0,1.

Functions

Equivalent to add_edge(G, E, V1, V2, Label), where E is a created edge.

Creates (or modifies) an edge with the identifier E of digraph G, using Label as the (new) label of the edge. The edge is emanating from V1 and incident on V2. Returns E.

Creates a vertex using the empty list as label, and returns the created vertex.

Creates (or modifies) vertex V of digraph G, using Label as the (new) label of the vertex. Returns the new vertex V.

Deletes edge E from digraph G.

Deletes the edges in list Edges from digraph G.

Deletes edges from digraph G until there are no paths from vertex V1 to vertex V2.

Deletes vertex V from digraph G. Any edges emanating from V or incident on V are also deleted.

Deletes the vertices in list Vertices from digraph G.

Deletes digraph G. This call is important as digraphs are implemented with ETS. There is no garbage collection of ETS tables. However, the digraph is deleted if the process that created the digraph terminates.

Returns {E, V1, V2, Label}, where Label is the label of edge E emanating from V1 and incident on V2 of digraph G. If no edge E of digraph G exists, false is returned.

Returns a list of all edges of digraph G, in some unspecified order.

Returns a list of all edges emanating from or incident on V of digraph G, in some unspecified order.

If a simple cycle of length two or more exists through vertex V, the cycle is returned as a list [V, ..., V] of vertices. If a loop through V exists, the loop is returned as a list [V]. If no cycles through V exist, false is returned.

Tries to find a simple path from vertex V1 to vertex V2 of digraph G. Returns the path as a list [V1, ..., V2] of vertices, or false if no simple path from V1 to V2 of length one or more exists.

Tries to find an as short as possible simple cycle through vertex V of digraph G. Returns the cycle as a list [V, ..., V] of vertices, or false if no simple cycle through V exists. Notice that a loop through V is returned as list [V, V].

Tries to find an as short as possible simple path from vertex V1 to vertex V2 of digraph G. Returns the path as a list [V1, ..., V2] of vertices, or false if no simple path from V1 to V2 of length one or more exists.

Returns the in-degree of vertex V of digraph G.

Returns a list of all edges incident on V of digraph G, in some unspecified order.

Returns a list of all in-neighbors of V of digraph G, in some unspecified order.

Returns a list of {Tag, Value} pairs describing digraph G. The following pairs are returned

Equivalent to new([]).

Returns an empty digraph with properties according to the options in Type

Returns the number of edges of digraph G.

Returns the number of vertices of digraph G.

Returns the out-degree of vertex V of digraph G.

Returns a list of all edges emanating from V of digraph G, in some unspecified order.

Returns a list of all out-neighbors of V of digraph G, in some unspecified order.

Returns {V, Label}, where Label is the label of the vertex V of digraph G, or false if no vertex V of digraph G exists.

Returns a list of all vertices of digraph G, in some unspecified order.

Types

Link to this type

add_edge_err_rsn()

View Source (not exported)
-type add_edge_err_rsn() :: {bad_edge, Path :: [vertex()]} | {bad_vertex, V :: vertex()}.

The error reason for when an edge could not be added to a graph.

If the edge would create a cycle in an acyclic digraph, {error, {bad_edge, Path}} is returned. If G already has an edge with value E connecting a different pair of vertices, {error, {bad_edge, [V1, V2]}} is returned. If either of V1 or V2 is not a vertex of digraph G, {error, {bad_vertex,V}} is returned, V = V1 or V = V2.

Link to this type

d_cyclicity()

View Source (not exported)
-type d_cyclicity() :: acyclic | cyclic.
Link to this type

d_protection()

View Source (not exported)
-type d_protection() :: private | protected.
-type d_type() :: d_cyclicity() | d_protection().
-type edge() :: term().

Serves as the identifier or "name" of an edge. This is distinct from an edge "label" which attaches ancillary information to the edge rather than identifying the edge itself.

-opaque graph()

A digraph as returned by new/0,1.

-type label() :: term().
-type vertex() :: term().

Functions

-spec add_edge(G, V1, V2) -> edge() | {error, add_edge_err_rsn()}
            when G :: graph(), V1 :: vertex(), V2 :: vertex().

Equivalent to add_edge(G, V1, V2, []).

Link to this function

add_edge(G, V1, V2, Label)

View Source
-spec add_edge(G, V1, V2, Label) -> edge() | {error, add_edge_err_rsn()}
            when G :: graph(), V1 :: vertex(), V2 :: vertex(), Label :: label().

Equivalent to add_edge(G, E, V1, V2, Label), where E is a created edge.

The created edge is represented by term ['$e' | N], where N is an integer >= 0.

See add_edge_err_rsn/0 for details on possible errors.

Link to this function

add_edge(G, E, V1, V2, Label)

View Source
-spec add_edge(G, E, V1, V2, Label) -> edge() | {error, add_edge_err_rsn()}
            when G :: graph(), E :: edge(), V1 :: vertex(), V2 :: vertex(), Label :: label().

Creates (or modifies) an edge with the identifier E of digraph G, using Label as the (new) label of the edge. The edge is emanating from V1 and incident on V2. Returns E.

See add_edge_err_rsn/0 for details on possible errors.

-spec add_vertex(G) -> vertex() when G :: graph().

Creates a vertex using the empty list as label, and returns the created vertex.

The created vertex is represented by term ['$v' | N], where N is an integer >= 0.

-spec add_vertex(G, V) -> vertex() when G :: graph(), V :: vertex().

Equivalent to add_vertex(G, V, []).

-spec add_vertex(G, V, Label) -> vertex() when G :: graph(), V :: vertex(), Label :: label().

Creates (or modifies) vertex V of digraph G, using Label as the (new) label of the vertex. Returns the new vertex V.

-spec del_edge(G, E) -> true when G :: graph(), E :: edge().

Deletes edge E from digraph G.

-spec del_edges(G, Edges) -> true when G :: graph(), Edges :: [edge()].

Deletes the edges in list Edges from digraph G.

-spec del_path(G, V1, V2) -> true when G :: graph(), V1 :: vertex(), V2 :: vertex().

Deletes edges from digraph G until there are no paths from vertex V1 to vertex V2.

A sketch of the procedure employed:

  • Find an arbitrary simple path v[1], v[2], ..., v[k] from V1 to V2 in G.
  • Remove all edges of G emanating from v[i] and incident to v[i+1] for 1 <= i < k (including multiple edges).
  • Repeat until there is no path between V1 and V2.
-spec del_vertex(G, V) -> true when G :: graph(), V :: vertex().

Deletes vertex V from digraph G. Any edges emanating from V or incident on V are also deleted.

Link to this function

del_vertices(G, Vertices)

View Source
-spec del_vertices(G, Vertices) -> true when G :: graph(), Vertices :: [vertex()].

Deletes the vertices in list Vertices from digraph G.

-spec delete(G) -> true when G :: graph().

Deletes digraph G. This call is important as digraphs are implemented with ETS. There is no garbage collection of ETS tables. However, the digraph is deleted if the process that created the digraph terminates.

-spec edge(G, E) -> {E, V1, V2, Label} | false
        when G :: graph(), E :: edge(), V1 :: vertex(), V2 :: vertex(), Label :: label().

Returns {E, V1, V2, Label}, where Label is the label of edge E emanating from V1 and incident on V2 of digraph G. If no edge E of digraph G exists, false is returned.

-spec edges(G) -> Edges when G :: graph(), Edges :: [edge()].

Returns a list of all edges of digraph G, in some unspecified order.

-spec edges(G, V) -> Edges when G :: graph(), V :: vertex(), Edges :: [edge()].

Returns a list of all edges emanating from or incident on V of digraph G, in some unspecified order.

-spec get_cycle(G, V) -> Vertices | false when G :: graph(), V :: vertex(), Vertices :: [vertex(), ...].

If a simple cycle of length two or more exists through vertex V, the cycle is returned as a list [V, ..., V] of vertices. If a loop through V exists, the loop is returned as a list [V]. If no cycles through V exist, false is returned.

get_path/3 is used for finding a simple cycle through V.

-spec get_path(G, V1, V2) -> Vertices | false
            when G :: graph(), V1 :: vertex(), V2 :: vertex(), Vertices :: [vertex(), ...].

Tries to find a simple path from vertex V1 to vertex V2 of digraph G. Returns the path as a list [V1, ..., V2] of vertices, or false if no simple path from V1 to V2 of length one or more exists.

Digraph G is traversed in a depth-first manner, and the first found path is returned.

-spec get_short_cycle(G, V) -> Vertices | false
                   when G :: graph(), V :: vertex(), Vertices :: [vertex(), ...].

Tries to find an as short as possible simple cycle through vertex V of digraph G. Returns the cycle as a list [V, ..., V] of vertices, or false if no simple cycle through V exists. Notice that a loop through V is returned as list [V, V].

get_short_path/3 is used for finding a simple cycle through V.

Link to this function

get_short_path(G, V1, V2)

View Source
-spec get_short_path(G, V1, V2) -> Vertices | false
                  when G :: graph(), V1 :: vertex(), V2 :: vertex(), Vertices :: [vertex(), ...].

Tries to find an as short as possible simple path from vertex V1 to vertex V2 of digraph G. Returns the path as a list [V1, ..., V2] of vertices, or false if no simple path from V1 to V2 of length one or more exists.

Digraph G is traversed in a breadth-first manner, and the first found path is returned.

-spec in_degree(G, V) -> non_neg_integer() when G :: graph(), V :: vertex().

Returns the in-degree of vertex V of digraph G.

-spec in_edges(G, V) -> Edges when G :: graph(), V :: vertex(), Edges :: [edge()].

Returns a list of all edges incident on V of digraph G, in some unspecified order.

-spec in_neighbours(G, V) -> Vertex when G :: graph(), V :: vertex(), Vertex :: [vertex()].

Returns a list of all in-neighbors of V of digraph G, in some unspecified order.

-spec info(G) -> InfoList
        when
            G :: graph(),
            InfoList ::
                [{cyclicity, Cyclicity :: d_cyclicity()} |
                 {memory, NoWords :: non_neg_integer()} |
                 {protection, Protection :: d_protection()}].

Returns a list of {Tag, Value} pairs describing digraph G. The following pairs are returned:

  • {cyclicity, Cyclicity}, where Cyclicity is cyclic or acyclic, according to the options given to new.
  • {memory, NoWords}, where NoWords is the number of words allocated to the ETS tables.
  • {protection, Protection}, where Protection is protected or private, according to the options given to new.
-spec new() -> graph().

Equivalent to new([]).

-spec new(Type) -> graph() when Type :: [d_type()].

Returns an empty digraph with properties according to the options in Type:

  • cyclic - Allows cycles in the digraph (default).

  • acyclic - The digraph is to be kept acyclic.

  • protected - Other processes can read the digraph (default).

  • private - The digraph can be read and modified by the creating process only.

If an unrecognized type option T is specified or Type is not a proper list, a badarg exception is raised.

-spec no_edges(G) -> non_neg_integer() when G :: graph().

Returns the number of edges of digraph G.

-spec no_vertices(G) -> non_neg_integer() when G :: graph().

Returns the number of vertices of digraph G.

-spec out_degree(G, V) -> non_neg_integer() when G :: graph(), V :: vertex().

Returns the out-degree of vertex V of digraph G.

-spec out_edges(G, V) -> Edges when G :: graph(), V :: vertex(), Edges :: [edge()].

Returns a list of all edges emanating from V of digraph G, in some unspecified order.

-spec out_neighbours(G, V) -> Vertices when G :: graph(), V :: vertex(), Vertices :: [vertex()].

Returns a list of all out-neighbors of V of digraph G, in some unspecified order.

-spec vertex(G, V) -> {V, Label} | false when G :: graph(), V :: vertex(), Label :: label().

Returns {V, Label}, where Label is the label of the vertex V of digraph G, or false if no vertex V of digraph G exists.

-spec vertices(G) -> Vertices when G :: graph(), Vertices :: [vertex()].

Returns a list of all vertices of digraph G, in some unspecified order.