-spec c(Mod :: module(), Fun :: atom(), Args :: [term()]) -> term().

Equivalent to c(Mod, Fun, Args, all).

-spec c(Mod :: module(), Fun :: atom(), Args :: [term()], Flags :: term()) -> term().

Evaluates the expression apply(Mod, Fun, Args) with the trace flags in Flags set.

c stands for call.

This is a convenient way to trace processes from the Erlang shell.

-spec cn(Nodename) -> ok when Nodename :: node().

Clears a node from the list of traced nodes.

cn stands for clear node.

Subsequent calls to tp/2 and p/2 will not consider that node, but tracing already activated on the node will continue to be in effect.

Returns ok. This call cannot fail.

-spec ctp() -> {ok, MatchDesc :: match_desc()} | {error, term()}.

Equivalent to ctp({'_', '_', '_'}).

-spec ctp(Module | {Module, Function, Arity}) -> {ok, MatchDesc :: match_desc()} | {error, term()}
       when Module :: tp_module(), Function :: tp_function(), Arity :: tp_arity().

Disables call tracing for one or more functions specified by ModuleOrMFA.

If ModuleOrMFA is an atom (a module name), this function call is equivalent to ctp({ModuleOrMFA, '_', '_'}.

Otherwise, ModuleOrMFA should be {Module, Function, Arity}.

ctp stands for clear trace pattern.

The semantics of ModuleOrMFA is the same as for the corresponding function specification in tp/2 or tpl/2. Both local and global call trace is disabled.

The return value reflects how many functions that matched, and is constructed as described in tp/2, except that no {saved, N} tuple is returned.

-spec ctp(Module :: tp_module(), Function :: tp_function()) ->
       {ok, MatchDesc :: match_desc()} | {error, term()}.

Equivalent to ctp({Module, Function, '_'}).

-spec ctp(Module :: tp_module(), Function :: tp_function(), Arity :: tp_arity()) ->
       {ok, MatchDesc :: match_desc()} | {error, term()}.

Equivalent to ctp({Module, Function, Arity}).

-spec ctpe(Event) -> {ok, MatchDesc} | {error, term()}
        when
            Event :: send | 'receive',
            MatchDesc :: [MatchNum],
            MatchNum :: {matched, node(), 1} | {matched, node(), 0, RPCError :: term()}.

Clears match specifications for the specified trace event (send or 'receive'), reverting to the default of tracing all triggered events.

ctpe stands for clear trace pattern event.

-spec ctpg() -> {ok, MatchDesc :: match_desc()} | {error, term()}.

Equivalent to ctpg({'_', '_', '_'}).

-spec ctpg(Module | {Module, Function :: tp_function(), Arity :: tp_arity()}) ->
        {ok, MatchDesc :: term()} | {error, term()}
        when Module :: tp_module().

Disables global call tracing for one or more functions specified by ModuleOrMFA.

If ModuleOrMFA is an atom (a module name), this function call is equivalent to ctpg({ModuleOrMFA, '_', '_'}.

Otherwise, ModuleOrMFA should be {Module, Function, Arity}.

ctpg stands for clear trace pattern global.

This function works as ctp/1, but only disables tracing set up with tp/2 (not with tpl/2).

-spec ctpg(Module :: tp_module(), Function :: tp_function()) ->
        {ok, MatchDesc :: match_desc()} | {error, term()}.

Equivalent to ctpg({Module, Function, '_'}).

-spec ctpg(Module :: tp_module(), Function :: tp_function(), Arity :: tp_arity()) ->
        {ok, MatchDesc :: match_desc()} | {error, term()}.

Equivalent to ctpg({Module, Function, Arity}).

-spec ctpl() -> {ok, MatchDesc :: match_desc()} | {error, term()}.

Equivalent to ctpl({'_', '_', '_'}).

-spec ctpl(Module | {Module, Function :: tp_function(), Arity :: tp_arity()}) ->
        {ok, MatchDesc :: term()} | {error, term()}
        when Module :: tp_module().

Disables local call tracing for one or more functions specified by ModuleOrMFA.

If ModuleOrMFA is an atom (a module name), this function call is equivalent to ctpl({ModuleOrMFA, '_', '_'}.

Otherwise, ModuleOrMFA should be {Module, Function, Arity}.

ctpl stands for clear trace pattern local.

This function works as ctp/1, but only disables tracing set up with tpl/2 (not with tp/2).

-spec ctpl(Module :: tp_module(), Function :: tp_function()) ->
        {ok, MatchDesc :: match_desc()} | {error, term()}.

Equivalent to ctpl({Module, Function, '_'}).

-spec ctpl(Module :: tp_module(), Function :: tp_function(), Arity :: tp_arity()) ->
        {ok, MatchDesc :: match_desc()} | {error, term()}.

Equivalent to ctpl({Module, Function, Arity}).

-spec dtp() -> ok.

Forgets all match specifications saved during calls to tp/2.

dtp stands for delete trace patterns.

Removing all saved match specifications is useful before restoring other match specifications from a file with rtp/1. Use dtp/1 to delete specific saved match specifications.

-spec dtp(N) -> ok when N :: tp_id().

Forgets a specific match specification saved during calls to tp/2.

dtp stands for delete trace pattern.

-spec flush_trace_port() -> term().

Equivalent to flush_trace_port(node()).

-spec flush_trace_port(Nodename :: node()) -> ok | {error, Reason :: term()}.

Equivalent to trace_port_control(Nodename, flush).

-spec fun2ms(LiteralFun) -> MatchSpec
          when LiteralFun :: fun((term()) -> term()), MatchSpec :: match_spec().

Pseudo function that by means of a parse transform translates the literal fun typed as parameter in the function call to a match specification.

The meaning of "literal" is that the fun needs to textually be written as the argument of the function call; it cannot be held in a variable which in turn is passed to the function. Furthermore, the parse transform module ms_transform must be enabled. The easiest way to enable it is by adding the following line to the source file:

-include_lib("stdlib/include/ms_transform.hrl").

Failing to include ms_transform.hrl in the source will result in a runtime error, not a compile-time error.

This function can also be invoked directly from the Erlang shell, as shown in the examples that follow.

The head of the fun must be a single pattern that matches a list. That pattern will be used to match the arguments for the call:

Examples:

1> dbg:fun2ms(fun([_,_]) -> true end).
[{['_','_'],[],[true]}]
2> dbg:fun2ms(fun(Args) when length(Args) > 6 -> true end).
[{'$1',[{'>',{length,'$1'},6}],[true]}]

The first match specification matches when a function having two arguments is called. The second matches when a function with more than 6 arguments is called.

Examples:

1> dbg:fun2ms(fun(42) -> true end).
Error: dbg:fun2ms requires fun with single variable or list parameter
{error,transform_error}
2> dbg:fun2ms(fun([<<H,T/binary>>]) -> true end).
Error: fun head contains bit syntax matching of variable 'H', which cannot be translated into match_spec
{error,transform_error}

The preceding two examples show what happens when a fun cannot be translated into a match specification. In the first example, the fun head connot possibly match a list. In the second example, an attempt is made to take apart a binary using the bit syntax, which is currently not supported in match specifications.

However, note that literal binaries can be matched:

1> dbg:fun2ms(fun([<<"abc">>]) -> true end).
[{[<<"abc">>],[],[true]}]

Match specifications support a large subset of the guard expressions supported by Erlang, but not all. For example, updating a map is currently not supported:

1> dbg:fun2ms(fun([M]) when map_size(M#{a => b}) > 2 -> true end).
Error: the language element map (in guard) cannot be translated into match_spec
{error,transform_error}

However, creating a map in a guard is allowed:

1> dbg:fun2ms(fun([M]) when map_size(#{a => b}) > 2 -> true end).
[{['$1'],[{'>',{map_size,#{a => b}},2}],[true]}]

Variables from the environment can be imported, so this works:

1> X = 3.
3
2> dbg:fun2ms(fun([M,N]) when N > X  -> return_trace() end).
[{['$1','$2'],[{'>','$2',{const,3}}],[{return_trace}]}]

The imported variables will be replaced by const expressions, which is consistent with the static scoping for Erlang funs.

In the body of the fun, only guard expressions and calls to the special functions for tracing are allowed.

Examples:

1> dbg:fun2ms(fun([A]) when is_atom(A) -> return_trace() end).
[{['$1'],[{is_atom,'$1'}],[{return_trace}]}]
2> dbg:fun2ms(fun(_) -> erlang:garbage_collect() end).
Error: fun containing the remote function call 'erlang:garbage_collect/0' (called in body) cannot be translated into match_spec
{error,transform_error}

Warning

If the parse transform is not applied to a module which calls dbg:fun2ms/1, the call will fail in runtime with a badarg exception.

More information is available in the documentation for module ms_transform in STDLIB.

-spec get_tracer() -> term().

Equivalent to get_tracer(node()).

-spec get_tracer(Nodename) -> {ok, Tracer}
              when Nodename :: atom(), Tracer :: port() | pid() | {module(), term()}.

Returns the process, port, or tracer module to which all trace messages are sent.

-spec h() -> ok.

Gives a list of items for brief online help.

h stands for help.

-spec h(Item) -> ok when Item :: atom().

Gives a brief help text for functions in the dbg module.

h stands for help.

The available items can be listed by calling dbg:h/0.

-spec i() -> ok.

Displays information about all traced processes and ports.

i stands for information.

-spec ln() -> ok.

Shows the list of traced nodes on the console.

ln stands for list nodes.

-spec ltp() -> ok.

Lists all match specifications previously used in the session.

ltp stands for list trace patterns.

This function lists all match specifications previously saved during calls to tp/2 and tpl/2, as well as all built-in match specifications. This avoids having to re-type complicated match specifications. Note that the match specifications are lost if stop/0 is called.

Match specifications can be saved in a file (if a read-write file system is present) for use in later debugging sessions; see wtp/1 and rtp/1.

There are three built-in trace patterns:

• exception_trace, x - sets a trace which will show function names, parameters, return values, and exceptions raised from functions

• caller_trace, c - sets a trace that displays function names, parameters, and information about which function called it

• caller_exception_trace, cx - combines exception_trace and caller_trace

Here is an example that shows how to use a built-in match specification:

1> dbg:tracer().
{ok,<0.90.0>}
2> dbg:tp(lists, seq, 2, cx).
{ok,[{matched,nonode@nohost,1},{saved,cx}]}
3> dbg:p(self(), call).
{ok,[{matched,nonode@nohost,1}]}
4> lists:seq(1, 5).
(<0.88.0>) call lists:seq(1,5) ({erl_eval,do_apply,7,{"erl_eval.erl",904}})
[1,2,3,4,5]
(<0.88.0>) returned from lists:seq/2 -> [1,2,3,4,5]

-spec n(Nodename) -> {ok, Nodename} | {error, Reason} when Nodename :: node(), Reason :: term().

Adds a remote node (Nodename) to the list of nodes where tracing is performed.

n stands for node.

The dbg server keeps a list of nodes where tracing should be performed. Whenever a tp/2 call or a p/2 call is made, it is executed for all nodes in this list including the local node (except for p/2 with a specific pid/0 or port/0 as first argument, in which case the command is executed only on the node where the designated process or port resides).

When this function is called, it starts a tracer process on the remote node, which will send all trace messages to the tracer process on the local node (via the Erlang distribution). If no tracer process is running on the local node, the error reason no_local_tracer is returned. The tracer process on the local node must be started with the tracer/0,2 function.

If Nodename is the local node, the error reason cant_add_local_node is returned.

If a trace port (see trace_port/2) is running on the local node, remote nodes cannot be traced with a tracer process. The error reason cant_trace_remote_pid_to_local_port is returned. However, a trace port can be started on the remote node with the tracer/3 function.

The function will also return an error if the node Nodename is not reachable.

-spec p(Item :: term()) -> {ok, MatchDesc :: term()} | {error, term()}.

Equivalent to p(Item, [m]).

-spec p(Item :: term(), Flags :: term()) -> {ok, MatchDesc} | {error, term()}
     when
         MatchDesc :: [MatchNum],
         MatchNum :: {matched, node(), integer()} | {matched, node(), 0, RPCError},
         RPCError :: term().

Traces Item in accordance to the value specified by Flags.

p stands for process.

The following kind of values are allowed for Item:

• pid/0 or port/0 - The corresponding process or port is traced. The process or port can be a remote process or port (on another Erlang node). The node must be in the list of traced nodes (see n/1 and tracer/3).

• all - All processes and ports in the system as well as all processes and ports created hereafter are to be traced.

• processes - All processes in the system as well as all processes created hereafter are to be traced.

• ports - All ports in the system as well as all ports created hereafter are to be traced.

• new - All processes and ports created after the call are to be traced.

• new_processes - All processes created after the call are to be traced.

• new_ports - All ports created after the call are to be traced.

• existing - All existing processes and ports are traced.

• existing_processes - All existing processes are traced.

• existing_ports - All existing ports are traced.

• atom/0 - The process or port with the corresponding registered name is traced. The process or port can on another Erlang node. The node must be in the list of traced nodes (see n/1 and tracer/3).

• integer/0 - The process <0.Item.0> is traced.

• {X, Y, Z} - The process <X.Y.Z> is traced.

• string/0 - If the Item is a string "<X.Y.Z>" as returned from pid_to_list/1, the process <X.Y.Z> is traced.

When enabling an Item that represents a group of processes, the Item is enabled on all nodes added with the n/1 or tracer/3 function.

Flags can be a single atom or a list of flags. The available flags are:

• s (send) - Traces the messages the process or port sends.

• r (receive) - Traces the messages the process or port receives.

• m (messages) - Traces the messages the process or port receives and sends.

• c (call) - Traces global function calls for the process according to the trace patterns set in the system (see tp/2).

• p (procs) - Traces process related events to the process.

• ports - Traces port related events to the port.

• sos (set on spawn) - Lets all processes created by the traced process inherit the trace flags of the traced process.

• sol (set on link) - Lets another process, P2, inherit the trace flags of the traced process whenever the traced process links to P2.

• sofs (set on first spawn) - This is the same as sos, but only for the first process spawned by the traced process.

• sofl (set on first link) - This is the same as sol, but only for the first call to link/1 by the traced process.

• all - Sets all flags except silent.

• clear - Clears all flags.

The list can also include any of the flags allowed in erlang:trace/3.

This function returns either an error tuple or an {ok, List} tuple. The List consists of specifications of how many processes and ports that matched (in the case of a single pid exactly 1). The specification of matched processes is {matched, Node, N}. If the remote processor call (using rpc) to a remote node fails, the rpc error message is returned as the fourth element in the tuple and the number of matched processes is 0.

-spec rtp(Name) -> ok | {error, Error} when Name :: string(), Error :: term().

Reads match specifications from a text file (possibly) generated by the wtp/1 function.

rtp stands for read trace patterns.

The function verifies that the syntax of all match specifications are correct. If any error in any match specification is found, none of the match specifications are added to the list of saved match specifications for the running system.

The match specifications in the file are merged with the current match specifications, so that no duplicates are generated. Use ltp/0 to see what numbers were assigned to the specifications from the file.

The function will return an error tuple, either due to I/O problems (like a non-existing or non-readable file) or due to file format problems. In the latter case, Reason is in a more or less textual format, giving a hint to what is causing the problem.

-spec stop() -> ok.

Stops the dbg server, clears all trace flags for all processes, clears all trace patterns for all functions, clears trace patterns for send/receive, shuts down all trace clients, and closes all trace ports.

-spec stop_trace_client(Pid) -> ok when Pid :: pid().

Shuts down a previously started trace client.

The Pid argument is the process id returned from the trace_client/2 or trace_client/3 call.

-spec tp(Module | {Module, Function, Arity}, MatchSpec) -> {ok, match_desc()} | {error, term()}
      when
          Module :: tp_module(),
          Function :: tp_function(),
          Arity :: tp_arity(),
          MatchSpec :: tp_match_spec().

Enables call trace for one or more exported functions specified by ModuleOrMFA.

If ModuleOrMFA is an atom (a module name), this function call is equivalent to tp({ModuleOrMFA, '_', '_'}, MatchSpec).

Otherwise, ModuleOrMFA should be {Module, Function, Arity}.

tp stands for trace pattern.

All exported functions matching the {Module, Function, Arity} argument will be concerned, but the match specification may further narrow down the set of function calls generating trace messages.

For a description of the format for the MatchSpec argument, see Match Specifications in Erlang, which explains the general match specification language. The most common generic match specifications used can be found as built-in aliases; see ltp/0 below for details.

The Module, Function and/or Arity parts of the tuple may be specified as the atom '_' which is a wildcard matching all modules, functions, or arities. Note that if the Module is specified as '_', the Function and Arity parts must be specified as '_' as well. The same holds for the Function in relation to Arity.

All nodes added with n/1 or tracer/3 will be affected by this call, and if Module is not '_' the module will be loaded on all nodes.

The function returns either an error tuple or an {ok, List} tuple. The List consists of specifications of how many functions that matched, in the same way as the processes and ports are presented in the return value of p/2.

There may be a tuple {saved, N} in the return value, if the MatchSpec is not []. The integer N can then be used in subsequent calls to this function and will stand as an "alias" for the given expression.

If the match specification is invalid, an {error, Errors} tuple is returned. Errors is as a list of tuples {error, string()}, where the string is a textual explanation of the compilation error. For example:

1> dbg:tp({dbg,ltp,0},[{[],[],[{message, two, arguments}, {noexist}]}]).
{error,
 [{error,"Special form 'message' called with wrong number of
          arguments in {message,two,arguments}."},
  {error,"Function noexist/1 does_not_exist."}]}

-spec tp(Module :: tp_module(), Function :: tp_function(), MatchSpec :: tp_match_spec()) ->
      {ok, match_desc()} | {error, term()}.

Equivalent to tp({Module, Function, '_'}, MatchSpec).

-spec tp(Module :: tp_module(),
   Function :: tp_function(),
   Arity :: tp_arity(),
   MatchSpec :: tp_match_spec()) ->
      {ok, match_desc()} | {error, term()}.

Equivalent to tp({Module, Function, Arity}, MatchSpec).

-spec tpe(Event, MatchSpec) -> {ok, MatchDesc :: match_desc()} | {error, term()}
       when Event :: send | 'receive', MatchSpec :: tp_match_spec().

Associates a match specification with trace event send or 'receive'.

tpe stands for trace pattern event.

By default all executed send and 'receive' events are traced if enabled for a process. A match specification can be used to filter traced events based on sender, receiver, and/or message content.

For a description of the format for the MatchSpec argument, see Match Specifications in Erlang, which explains the general match specification language.

For send, the matching is done on the list [Receiver, Msg]. Receiver is the process or port identity of the receiver and Msg is the message term. The pid of the sending process can be accessed with the guard function self/0.

For 'receive', the matching is done on the list [Node, Sender, Msg]. Node is the node name of the sender. Sender is the process or port identity of the sender, or the atom undefined if the sender is not known (which may be the case for remote senders). Msg is the message term. The pid of the receiving process can be accessed by calling self/0.

All nodes added with n/1 or tracer/3 will be affected by this call.

The return value is the same as for tp/2. The number of matched events is always 1 as tpe/2 does not accept any form of wildcards for argument Event.

-spec tpl(Module | {Module, Function :: tp_function(), Arity :: tp_arity()},
    MatchSpec :: tp_match_spec()) ->
       {ok, MatchDesc :: term()} | {error, term()}
       when Module :: tp_module().

Enables call trace for one or more functions specified by ModuleOrMFA.

If ModuleOrMFA is an atom (a module name), this function call is equivalent to tpl({ModuleOrMFA, '_', '_'}, MatchSpec).

Otherwise, ModuleOrMFA should be {Module, Function, Arity}.

tpl stands for trace pattern local.

This function works as tp/2, but enables tracing for local or remote calls to both local and exported functions.

-spec tpl(Module :: tp_module(), Function :: tp_function(), MatchSpec :: tp_match_spec()) ->
       {ok, match_desc()} | {error, term()}.

Equivalent to tpl({Module, Function, '_'}, MatchSpec).

-spec tpl(Module :: tp_module(),
    Function :: tp_function(),
    Arity :: tp_arity(),
    MatchSpec :: tp_match_spec()) ->
       {ok, match_desc()} | {error, term()}.

Equivalent to tpl({Module, Function, Arity}, MatchSpec).

-spec trace_client(ip, IPClientPortSpec) -> pid()
                when
                    IPClientPortSpec :: PortNumber | {Hostname, PortNumber},
                    PortNumber :: integer(),
                    Hostname :: string();
            (Type, Parameters) -> pid()
                when
                    Type :: file | follow_file,
                    Parameters :: Filename | WrapFilesSpec,
                    Filename :: file:name_all(),
                    WrapFilesSpec :: trace_wrap_files_spec().

Starts a trace client that reads the output created by a trace port driver (see trace_port/2) and handles it in mostly the same way as a tracer process created by the tracer/0 function.

If Type is file, the client reads all trace messages stored in the file named Filename or specified by WrapFilesSpec (must be the same as used when creating the trace) and lets the default handler function format the messages on the console. This is one way to interpret the data stored in a file by the file trace port driver.

If Type is follow_file, the client behaves as in the file case, but keeps trying to read (and process) more data from the file until stopped by stop_trace_client/1. WrapFilesSpec is not allowed as second argument for this Type.

If Type is ip, the client connects to the TCP/IP port PortNumber on the host Hostname, from where it reads trace messages until the TCP/IP connection is closed. If no Hostname is specified, the local host is assumed.

As an example, one can let trace messages be sent over the network to another Erlang node (preferably not distributed), where the formatting occurs.

On the node stack there exists an Erlang node ant@stack. In the shell, type the following:

ant@stack> dbg:tracer(port, dbg:trace_port(ip, 4711)).
<0.17.0>
ant@stack> dbg:p(self(), send).
{ok,1}

All trace messages are now sent to the trace port driver, which in turn listens for connections on the TCP/IP port 4711. If we want to see the messages on another node, preferably on another host, we do like this:

1> dbg:trace_client(ip, {"stack", 4711}).
<0.42.0>

If we now send a message from the shell on the node ant@stack, where all sends from the shell are traced:

ant@stack> self() ! hello.
hello

The following will appear at the console on the node that started the trace client:

(<0.23.0>) <0.23.0> ! hello
(<0.23.0>) <0.22.0> ! {shell_rep,<0.23.0>,{value,hello,[],[]}}

The last line is generated due to internal message passing in the Erlang shell. The pids will vary.

-spec trace_client(ip, IPClientPortSpec, HandlerSpec) -> pid()
                when
                    IPClientPortSpec :: PortNumber | {Hostname, PortNumber},
                    PortNumber :: integer(),
                    Hostname :: string(),
                    HandlerSpec :: handler_spec();
            (Type, Parameters, HandlerSpec) -> pid()
                when
                    Type :: file | follow_file,
                    Parameters :: Filename | WrapFilesSpec,
                    Filename :: string() | [string()] | atom(),
                    WrapFilesSpec :: trace_wrap_files_spec(),
                    HandlerSpec :: handler_spec().

This function works exactly as trace_client/2, but allows you to write your own handler function.

The handler function works mostly as the one described in tracer/2, but must also be prepared to handle trace messages of the form {drop, N}, where N is the number of dropped messages. This pseudo trace message will only occur if the ip trace driver is used.

For trace type file, the pseudo trace message end_of_trace will appear at the end of the trace. The return value from the handler function is in this case ignored.

-spec trace_port(ip, IpPortSpec) -> fun(() -> port())
              when
                  IpPortSpec :: PortNumber | {PortNumber, QueSize},
                  PortNumber :: integer(),
                  QueSize :: integer();
          (file, Parameters) -> fun(() -> port())
              when
                  Parameters :: Filename | WrapFilesSpec,
                  Filename :: file:name_all(),
                  WrapFilesSpec :: trace_wrap_files_spec().

Creates a trace-port-generating fun that is suitable as the second argument to tracer/2.

Example:

dbg:tracer(port, dbg:trace_port(ip, 4711)).

A trace port is an Erlang port to a dynamically linked-in driver that handles trace messages directly, without the overhead of sending them as messages to an Erlang process. Using a trace port significantly lowers the overhead imposed by tracing.

Two trace drivers are currently implemented: the file and the ip trace drivers.

The file driver sends all trace messages into one or several binary files, from where they later can be fetched and processed with the trace_client/2 function.

The ip driver opens a TCP/IP port listening port. When a client (preferably started by calling trace_client/2 on another Erlang node) connects, all trace messages are sent over the IP network for further processing by the remote client.

The file trace driver expects a filename or a wrap files specification as parameter. A file is written with a high degree of buffering, which is why there is no guarantee that all are saved in the file in case of a system crash.

A wrap files specification is used to limit the disk space consumed by the trace. The trace is written to a limited number of files each with a limited size. The actual filenames are Filename ++ SeqCnt ++ Suffix, where SeqCnt counts as a decimal string from 0 to WrapCnt and then around again from 0. When a trace term written to the current file makes it longer than WrapSize, that file is closed, and if the number of files in this wrap trace is as many as WrapCnt the oldest file is deleted, and a new file is opened to become the current. Thus, when a wrap trace has been stopped, there are at most WrapCnt trace files saved with a size of at least WrapSize (but not much larger), except for the last file that might even be empty. The default values are WrapSize = 128*1024 and WrapCnt = 8.

The SeqCnt values in the filenames are all in the range 0 through WrapCnt with a gap in the circular sequence. The gap is needed to find the end of the trace.

If the WrapSize is specified as {time, WrapTime}, the current file is closed when it has been open more than WrapTime milliseconds, regardless of it being empty or not.

The ip trace driver has a queue of QueSize messages waiting to be delivered. If the driver cannot deliver messages as fast as they are produced by the runtime system, a special message is sent, which indicates how many messages that are dropped. That message will arrive at the handler function specified in trace_client/3 as the tuple {drop, N} where N is the number of consecutive messages dropped. In case of heavy tracing, drops are likely to occur, and they surely occur if no client is reading the trace messages. The default value of QueSize is 200.

-spec trace_port_control(Operation :: term()) -> term().

Equivalent to trace_port_control(node(), Operation).

-spec trace_port_control(Nodename :: node(), Operation :: term()) ->
                      ok | {ok, Result :: term()} | {error, Reason :: term()}.

This function is used to do a control operation on the active trace port driver on the given node (Nodename).

Which operations are allowed as well as their return values depend on which trace driver is used.

Returns either ok or {ok, Result} if the operation was successful, or {error, Reason} if the current tracer is a process, or if it is a port not supporting the operation.

The allowed values for Operation are:

• flush - This function is used to flush the internal buffers held by a trace port driver. Currently only the file trace driver supports this operation. Returns ok.

• get_listen_port - Returns {ok, IpPort} where IpPort is the IP port number used by the driver listen socket. Only the ip trace driver supports this operation.

-spec tracer() -> {ok, pid()} | {error, already_started}.

Starts a server on the local node that will be the recipient of all trace messages.

All subsequent calls to p/2 will result in messages sent to the newly started trace server.

A trace server started in this way will simply display the formatted trace messages the Erlang shell (that is, using io:format/2). See tracer/2 for a description of how the trace message handler can be customized.

To start a similar tracer on a remote node, use n/1.

-spec tracer(port, PortGenerator) -> {ok, pid()} | {error, Error :: term()}
          when PortGenerator :: fun(() -> port());
      (process, HandlerSpec) -> {ok, pid()} | {error, Error :: term()}
          when
              HandlerSpec :: {HandlerFun, InitialData :: term()},
              HandlerFun :: fun((Event :: term(), Data :: term()) -> NewData :: term());
      (module, ModuleSpec) -> {ok, pid()} | {error, Error :: term()}
          when
              ModuleSpec :: fun(() -> {TracerModule, TracerState}) | {TracerModule, TracerState},
              TracerModule :: atom(),
              TracerState :: term();
      (file, Filename) -> {ok, pid()} | {error, Error :: term()} when Filename :: file:name_all().

Starts a tracer server with additional parameters on the local node.

Type indicates how trace messages should be handled:

• process - by a receiving process
• port - by a port; see trace_port/2
• module - by a tracer module; see erl_tracer
• file - by printing them to a file

If Type is process, Data should be a message handler function (HandlerSpec). The handler function, which should be a fun taking two arguments, will be called for each trace message, with the first argument containing the message as it is and the second argument containing the return value from the last invocation of the fun. The initial value of the second parameter is specified in the InitialData part of the HandlerSpec. The HandlerFun can choose any appropriate action to take when invoked, and can save a state for the next invocation by returning it.

If Type is port, then the second parameter should be a fun which takes no arguments and returns a newly opened trace port when called. Such a fun is preferably generated by calling trace_port/2.

If Type is module, Data should be either a tuple describing the erl_tracer module to be used for tracing and the state to be used for that tracer module, or a fun returning that kind of tuple.

if Type is file, Data should be a filename specifying a file where all the traces are to be printed.

If an error is returned, it can either be because a tracer server is already running ({error,already_started}), or because HandlerFun raised an exception.

To start a similar tracer on a remote node, use tracer/3.

-spec tracer(Nodename :: node(), Type :: term(), Data :: term()) ->
          {ok, Nodename :: node()} | {error, Reason :: term()}.

This function is equivalent to tracer/2, but acts on the given node.

A tracer is started on the node (Nodename) and the node is added to the list of traced nodes.

Note

This function is not equivalent to n/1. While n/1 starts a process tracer which redirects all trace information to a process tracer on the local node (that is, the trace control node), tracer/3 starts any type of tracer, independent of the type of tracer on the trace control node.

For details, see tracer/2.

-spec wtp(Name) -> ok | {error, IOError} when Name :: string(), IOError :: term().

Saves all match specifications saved during the session (by calls to tp/2 or tpl/2), as well as built-in match specifications, in a text file with the name designated by Name.

wtp stands for write trace patterns.

The format of the file is textual, which means that it can be edited with a text editor, and then restored with rtp/1.

Each match specification in the file ends with a period (.) and new (syntactically correct) match specifications can be added to the file manually.

The function returns ok, or an error tuple where the second element indicates the reason that writing the file failed.