httpc

Module

httpc

Module Summary

An HTTP/1.1 client

Since

Module httpc was introduced in OTP R13B04.

Description

This module provides the API to an HTTP/1.1 compatible client according to RFC 2616. Caching is not supported.

Note

When starting the Inets application, a manager process for the default profile is started. The functions in this API that do not explicitly use a profile accesses the default profile. A profile keeps track of proxy options, cookies, and other options that can be applied to more than one request.

If the scheme https is used, the SSL application must be started. When https links need to go through a proxy, the CONNECT method extension to HTTP-1.1 is used to establish a tunnel and then the connection is upgraded to TLS. However, "TLS upgrade" according to RFC 2817is not supported.

Pipelining is only used if the pipeline time-out is set, otherwise persistent connections without pipelining are used. That is, the client always waits for the previous response before sending the next request.

Some examples are provided in the Inets User's Guide.

HTTP CLIENT SERVICE START/STOP

An HTTP client can be configured to start when starting the Inets application or started dynamically in runtime by calling the Inets application API inets:start(httpc, ServiceConfig) or inets:start(httpc, ServiceConfig, How), see inets(3). The configuration options are as follows:

{profile, Profile :: atom() | pid()}: Name of the profile. This option is mandatory.
{data_dir, Path :: string()}: Directory where the profile can save persistent data. If omitted, all cookies are treated as session cookies. Path represents a file path or directory path.

The client can be stopped using inets:stop(httpc, Pid) or inets:stop(httpc, Profile).

Warning

Please note that httpc normalizes input URIs before internal processing and special care shall be taken when the URI has percent ("%") characters. A percent serves as the indicator for percent-encoded octets and it must be percent-encoded as "%25" for that octet to be used as data within the URI.

For example, in order to send an HTTP GET request with the URI http://localhost/foo%25bar, the percent character must be percent-encoded when creating the request: httpc:request("http://localhost/foo%2525bar").

Exports

cancel_request(RequestId) -> ok
OTP R13B04

cancel_request(RequestId, Profile) -> ok
OTP R13B04

Types

RequestId = any()

A unique identifier as returned by request/4

Profile = atom() | pid()

When started stand_alone only the pid can be used.

Cancels an asynchronous HTTP request. Notice that this does not guarantee that the request response is not delivered. Because it is asynchronous, the request can already have been completed when the cancellation arrives.

cookie_header(Url) -> HttpHeader | {error, Reason}
OTP R13B04

cookie_header(Url, ProfileOrOpts) -> HttpHeader | {error, Reason}
OTP R13B04

Types

Url = uri_string:uri_string()

HttpHeader = {Field :: [byte()], Value :: binary() | iolist()}

ProfileOrOpts = Profile | Opts

Profile = atom() | pid()

When started stand_alone only the pid can be used.

Opts = [CookieHeaderOpt]

CookieHeaderOpt = {ipv6_host_with_brackets, boolean()}

Reason = term()

Returns the cookie header that would have been sent when making a request to Url using profile Profile. If no profile is specified, the default profile is used.

Option ipv6_host_with_bracket deals with how to parse IPv6 addresses. For details, see argument Options of request/[4,5].

cookie_header(Url, Opts, Profile) -> HttpHeader | {error, Reason}
OTP R15B

Types

Url = uri_string:uri_string()

HttpHeader = {Field :: [byte()], Value :: binary() | iolist()}

Profile = atom() | pid()

When started stand_alone only the pid can be used.

Opts = [CookieHeaderOpt]

CookieHeaderOpt = {ipv6_host_with_brackets, boolean()}

Reason = term()

Returns the cookie header that would have been sent when making a request to Url using profile Profile. If no profile is specified, the default profile is used.

Option ipv6_host_with_bracket deals with how to parse IPv6 addresses. For details, see argument Options of request/[4,5].

get_options(OptionItems) -> {ok, Values} | {error, Reason}
OTP R15B01

get_options(OptionItems, Profile) ->
{ok, Values} | {error, Reason}
OTP R15B01

Types

OptionItems = all | [OptionItem]

Values = [{OptionItem, term()}]

Profile = atom() | pid()

When started stand_alone only the pid can be used.

Reason = term()

Retrieves the options currently used by the client.

info() -> list() | {error, Reason}
OTP R15B02

info(Profile) -> list() | {error, Reason}
OTP R15B02

Types

Reason = term()

Profile = atom() | pid()

When started stand_alone only the pid can be used.

Produces a list of miscellaneous information. Intended for debugging. If no profile is specified, the default profile is used.

reset_cookies() -> Void
OTP R13B04

reset_cookies(Profile) -> Void
OTP R13B04

Types

Profile = atom() | pid()

When started stand_alone only the pid can be used.

Void = term()

Resets (clears) the cookie database for the specified Profile. If no profile is specified the default profile is used.

request(Url :: uri_string:uri_string()) ->
{ok, Result} | {error, term()}
OTP R13B04

request(Url, Profile) -> {ok, Result} | {error, term()}
OTP R13B04

Types

Url = uri_string:uri_string()

Profile = atom() | pid()

When started stand_alone only the pid can be used.

Result =
    {StatusLine, [HttpHeader], HttpBodyResult} |
    {StatusCode, HttpBodyResult} |
    RequestId | saved_to_file

HttpHeader = {Field :: [byte()], Value :: binary() | iolist()}

HttpBodyResult = uri_string:uri_string() | binary()

StatusLine = {HttpVersion, StatusCode, string()}

HttpVersion = uri_string:uri_string()

StatusCode = integer() >= 0

RequestId = any()

Equivalent to httpc:request(get, {Url, []}, [], []).

request(Method, Request, HttpOptions, Options) ->
{ok, Result} | {error, term()}
OTP R13B04

request(Method, Request, HttpOptions, Options, Profile) ->
{ok, Result} | {error, term()}
OTP R13B04

Types

Request =
    {uri_string:uri_string(), [HttpHeader]} |
    {uri_string:uri_string(),
     [HttpHeader],
     ContentType :: uri_string:uri_string(),
     HttpBody}

HttpBody =
    iolist() |
    binary() |
    {fun((Accumulator :: term()) ->
             eof | {ok, iolist(), Accumulator :: term()}),
     Accumulator :: term()} |
    {chunkify,
     fun((Accumulator :: term()) ->
             eof | {ok, iolist(), Accumulator :: term()}),
     Accumulator :: term()}

HttpHeader = {Field :: [byte()], Value :: binary() | iolist()}

HttpOptions = [HttpOption]

HttpOption =
    {timeout, timeout()} |
    {connect_timeout, timeout()} |
    {ssl, [ssl:tls_option()]} |
    {autoredirect, boolean()} |
    {proxy_auth, {string(), string()}} |
    {version, HttpVersion} |
    {relaxed, boolean()}

Options = [OptionRequest]

OptionRequest =
    {sync, boolean()} |
    {stream, StreamTo} |
    {body_format, BodyFormat} |
    {full_result, boolean()} |
    {headers_as_is, boolean()} |
    {socket_opts, [SocketOpt]} |
    {receiver, Receiver} |
    {ipv6_host_with_brackets, boolean()}

StreamTo = none | self | {self, once} | file:name_all()

BodyFormat = string() | binary() | atom()

SocketOpt = term()

Receiver =
    pid() |
    fun((term()) -> term()) |
    {ReceiverModule :: atom(),
     ReceiverFunction :: atom(),
     ReceiverArgs :: list()}

Profile = atom() | pid()

When Profile is stand_alone only the pid can be used.

HttpVersion = uri_string:uri_string()

Result =
    {StatusLine, [HttpHeader], HttpBodyResult} |
    {StatusCode, HttpBodyResult} |
    RequestId | saved_to_file

StatusLine = {HttpVersion, StatusCode, string()}

StatusCode = integer() >= 0

HttpBodyResult = uri_string:uri_string() | binary()

RequestId = any()

Sends an HTTP request. The function can be both synchronous and asynchronous. In the latter case, the function returns {ok, RequestId} and then the information is delivered to the receiver depending on that value.

When Profile is stand_alone only the pid can be used.

HTTP options:

timeout

Time-out time for the request.

The clock starts ticking when the request is sent.

Time is in milliseconds.

Default is infinity.

connect_timeout

Connection time-out time, used during the initial request, when the client is connecting to the server.

Time is in milliseconds.

Default is the value of option timeout.

ssl

This is the SSL/TLS connecting configuration option.

Default value is obtained by calling httpc:ssl_verify_host_options(true). . See ssl:connect/[2,3,4] for available options.

autoredirect

The client automatically retrieves the information from the new URI and returns that as the result, instead of a 30X-result code.

For some 30X-result codes, automatic redirect is not allowed. In these cases the 30X-result is always returned.

Default is true.

proxy_auth

A proxy-authorization header using a tuple where the first element is the username and the second element of the tuple is the password added to the request.

version

Can be used to make the client act as an HTTP/1.0 client. By default this is an HTTP/1.1 client. When using HTTP/1.0 persistent connections are not used.

Default is the string "HTTP/1.1".

relaxed

If set to true, workarounds for known server deviations from the HTTP-standard are enabled.

Default is false.

Options details:

sync

Option for the request to be synchronous or asynchronous.

Default is true.

stream

Streams the body of a 200 or 206 response to the calling process or to a file. When streaming to the calling process using option self, the following stream messages are sent to that process: {http, {RequestId, stream_start, Headers}}, {http, {RequestId, stream, BinBodyPart}}, and {http, {RequestId, stream_end, Headers}}.

When streaming to the calling processes using option {self, once}, the first message has an extra element, that is, {http, {RequestId, stream_start, Headers, Pid}}. This is the process id to be used as an argument to httpc:stream_next/1 to trigger the next message to be sent to the calling process.

Notice that chunked encoding can add headers so that there are more headers in the stream_end message than in stream_start. When streaming to a file and the request is asynchronous, the message {http, {RequestId, saved_to_file}} is sent.

Default is none.

body_format

Defines if the body is to be delivered as a string or binary. This option is only valid for the synchronous request.

Default is string.

full_result

Defines if a "full result" is to be returned to the caller (that is, the body, the headers, and the entire status line) or not (the body and the status code).

Default is true.

headers_as_is

Defines if the headers provided by the user are to be made lower case or to be regarded as case sensitive.

The HTTP standard requires them to be case insensitive. Use this feature only if there is no other way to communicate with the server or for testing purpose. When this option is used, no headers are automatically added. All necessary headers must be provided by the user.

Default is false.

socket_opts

Socket options to be used for this request.

See the options used by gen_tcp(3) and ssl(3)

Overrides any value set by function set_options.

The validity of the options is not checked by the HTTP client they are assumed to be correct and passed on to ssl application and inet driver, which may reject them if they are not correct.

Note

Persistent connections are not supported when setting the socket_opts option. When socket_opts is not set the current implementation assumes the requests to the same host, port combination will use the same socket options.

By default the socket options set by function set_options/[1,2] are used when establishing a connection.

receiver

Defines how the client delivers the result of an asynchronous request (sync has the value false).

pid(): Messages are sent to this process in the format {http, ReplyInfo}.
function/1: Information is delivered to the receiver through calls to the provided fun Receiver(ReplyInfo).
{Module, Function, Args}: Information is delivered to the receiver through calls to the callback function apply(Module, Function, [ReplyInfo | Args]).

In all of these cases, ReplyInfo has the following structure:

 {RequestId, saved_to_file}
 {RequestId, {error, Reason}}
 {RequestId, Result}
 {RequestId, stream_start, Headers}
 {RequestId, stream_start, Headers, HandlerPid}
 {RequestId, stream, BinBodyPart}
 {RequestId, stream_end, Headers}

Default is the pid of the process calling the request function (self()).

ipv6_host_with_brackets

Defines when parsing the Host-Port part of an URI with an IPv6 address with brackets, if those brackets are to be retained (true) or stripped (false).

Default is false.

set_options(Options) -> ok | {error, Reason}
OTP R13B04

set_options(Options, Profile) -> ok | {error, Reason}
OTP R13B04

Types

Options = [Option]

Option =
    {proxy, {Proxy, NoProxy}} |
    {https_proxy, {Proxy, NoProxy}} |
    {max_sessions, MaxSessions} |
    {max_keep_alive_length, MaxKeepAlive} |
    {keep_alive_timeout, KeepAliveTimeout} |
    {max_pipeline_length, MaxPipeline} |
    {pipeline_timeout, PipelineTimeout} |
    {cookies, CookieMode} |
    {ipfamily, IpFamily} |
    {ip, IpAddress} |
    {port, Port} |
    {socket_opts, [SocketOpt]} |
    {verbose, VerboseMode} |
    {unix_socket, UnixSocket}

Profile = atom() | pid()

SocketOpt = term()

Proxy = {HostName, Port}

Port = integer() >= 0

NoProxy = [DomainDesc | HostName | IpAddressDesc]

MaxSessions = MaxKeepAlive = KeepAliveTimeout = MaxPipeline = PipelineTimeout = integer()

CookieMode = enabled | disabled | verify

IpFamily = inet | inet6 | local | inet6fb4

IpAddressDesc = uri_string:uri_string()

IpAddress = inet:ip_address()

VerboseMode = false | verbose | debug | trace

UnixSocket = string()

Reason = term()

DomainDesc = string()

HostName = uri_string:uri_string()

Sets options to be used for subsequent requests.

HostName: Example: "localhost" or "foo.bar.se"
DomainDesc: Example "*.Domain" or "*.ericsson.se"
IpAddressDesc: Example: "134.138" or "[FEDC:BA98" (all IP addresses starting with 134.138 or FEDC:BA98), "66.35.250.150" or "[2010:836B:4179::836B:4179]" (a complete IP address). proxy defaults to {undefined, []}, that is, no proxy is configured and https_proxy defaults to the value of proxy.
MaxSessions: MaxSessions Maximum number of persistent connections to a host. Default is 2.
MaxKeepAlive: MaxKeepAlive Maximum number of outstanding requests on the same connection to a host. Default is 5.
KeepAliveTimeout: KeepAliveTimeout If a persistent connection is idle longer than the keep_alive_timeout in milliseconds, the client closes the connection. The server can also have such a time-out but do not take that for granted. Default is 120000 (= 2 min).
MaxPipeline: MaxPipeline Maximum number of outstanding requests on a pipelined connection to a host. Default is 2.
PipelineTimeout: PipelineTimeout If a persistent connection is idle longer than the pipeline_timeout in milliseconds, the client closes the connection. Default is 0, which results in pipelining not being used.
CookieMode: If cookies are enabled, all valid cookies are automatically saved in the cookie database of the client manager. If option verify is used, function store_cookies/2 has to be called for the cookies to be saved. Default is disabled.
IpFamily: Default is inet. With inet6fb4 option, IPv6 will be preferred but if connection fails, an IPv4 fallback connection attempt will be made.
IpAddress: If the host has several network interfaces, this option specifies which one to use. See gen_tcp:connect/3,4 for details.
Port: Example: 8080. Local port number to use. See gen_tcp:connect/3,4 for details.
SocketOpts: The options are appended to the socket options used by the client. These are the default values when a new request handler is started (for the initial connect). They are passed directly to the underlying transport (gen_tcp or SSL) without verification.
See the options used by gen_tcp(3) and ssl(3)
VerboseMode: Default is false. This option is used to switch on (or off) different levels of Erlang trace on the client. It is a debug feature.
Profile: When started stand_alone only the pid can be used.
UnixSocket: Experimental option for sending HTTP requests over a unix domain socket. The value of unix_socket shall be the full path to a unix domain socket file with read/write permissions for the erlang process. Default is undefined.

Note

If possible, the client keeps its connections alive and uses persistent connections with or without pipeline depending on configuration and current circumstances. The HTTP/1.1 specification does not provide a guideline for how many requests that are ideal to be sent on a persistent connection. This depends much on the application.

A long queue of requests can cause a user-perceived delay, as earlier requests can take a long time to complete. The HTTP/1.1 specification suggests a limit of two persistent connections per server, which is the default value of option max_sessions.

The current implementation assumes the requests to the same host, port combination will use the same socket options.

ssl_verify_host_options(WildcardHostName) -> list()
OTP 25.1

Types

WildcardHostName = boolean()

Returns ssl options which can be used to verify the host, uses public_key:cacerts_get() to read CA certicates and if WildcardHostName is true adds the hostname check from public_key:public_key:pkix_verify_hostname_match_fun(https) to the options.

store_cookies(SetCookieHeaders, Url) -> ok | {error, Reason}
OTP R14B02

store_cookies(SetCookieHeaders, Url, Profile) ->
ok | {error, Reason}
OTP R14B02

Types

SetCookieHeaders = [HttpHeader]

Where field = "set-cookie"

HttpHeader = {Field :: [byte()], Value :: binary() | iolist()}

Url = term()

Profile = atom() | pid()

When started stand_alone only the pid can be used.

Reason = term()

Saves the cookies defined in SetCookieHeaders in the client profile cookie database. Call this function if option cookies is set to verify. If no profile is specified, the default profile is used.

stream_next(Pid) -> ok
OTP R13B04

Types

Pid = pid()

As received in the stream_start message

Triggers the next message to be streamed, that is, the same behavior as active ones for sockets.

which_cookies() -> [CookieStores]
OTP R13B04

which_cookies(Profile) -> [CookieStores]
OTP R13B04

Types

Profile = atom() | pid()

When started stand_alone only the pid can be used.

CookieStores = {cookies, Cookies} | {session_cookies, Cookies}

Cookies = [term()]

Produces a list of the entire cookie database. Intended for debugging/testing purposes. If no profile is specified, the default profile is used.

which_sessions() -> SessionInfo
OTP R15B02

which_sessions(Profile) -> SessionInfo
OTP R15B02

Types

Profile = atom() | pid()

When started stand_alone only the pid can be used.

SessionInfo = {GoodSession, BadSessions, NonSessions}

GoodSession = [Session]

BadSessions = NonSessions = [term()]

Session = term()

Internal representation of a session.

This function is intended for debugging only. It produces a slightly processed dump of the session database. The first list of the session information tuple will contain session information on an internal format. The last two lists of the session information tuple should always be empty if the code is working as intended. If no profile is specified, the default profile is used.

httpc

httpc

Module

Module Summary

Since

Description

HTTP CLIENT SERVICE START/STOP

Exports

cancel_request(RequestId) -> okOTP R13B04

cancel_request(RequestId, Profile) -> okOTP R13B04

Types

cookie_header(Url) -> HttpHeader | {error, Reason}OTP R13B04

cookie_header(Url, ProfileOrOpts) -> HttpHeader | {error, Reason}OTP R13B04

Types

cookie_header(Url, Opts, Profile) -> HttpHeader | {error, Reason}OTP R15B

Types

get_options(OptionItems) -> {ok, Values} | {error, Reason}OTP R15B01

get_options(OptionItems, Profile) -> {ok, Values} | {error, Reason}OTP R15B01

Types

info() -> list() | {error, Reason}OTP R15B02

info(Profile) -> list() | {error, Reason}OTP R15B02

Types

reset_cookies() -> VoidOTP R13B04

reset_cookies(Profile) -> VoidOTP R13B04

Types

request(Url :: uri_string:uri_string()) -> {ok, Result} | {error, term()}OTP R13B04

request(Url, Profile) -> {ok, Result} | {error, term()}OTP R13B04

Types

request(Method, Request, HttpOptions, Options) -> {ok, Result} | {error, term()}OTP R13B04

request(Method, Request, HttpOptions, Options, Profile) -> {ok, Result} | {error, term()}OTP R13B04

Types

set_options(Options) -> ok | {error, Reason}OTP R13B04

set_options(Options, Profile) -> ok | {error, Reason}OTP R13B04

Types

ssl_verify_host_options(WildcardHostName) -> list()OTP 25.1

Types

store_cookies(SetCookieHeaders, Url) -> ok | {error, Reason}OTP R14B02

store_cookies(SetCookieHeaders, Url, Profile) -> ok | {error, Reason}OTP R14B02

Types

stream_next(Pid) -> okOTP R13B04

Types

which_cookies() -> [CookieStores]OTP R13B04

which_cookies(Profile) -> [CookieStores]OTP R13B04

Types

which_sessions() -> SessionInfoOTP R15B02

which_sessions(Profile) -> SessionInfoOTP R15B02

Types

SEE ALSO

cancel_request(RequestId) -> ok
OTP R13B04

cancel_request(RequestId, Profile) -> ok
OTP R13B04

cookie_header(Url) -> HttpHeader | {error, Reason}
OTP R13B04

cookie_header(Url, ProfileOrOpts) -> HttpHeader | {error, Reason}
OTP R13B04

cookie_header(Url, Opts, Profile) -> HttpHeader | {error, Reason}
OTP R15B

get_options(OptionItems) -> {ok, Values} | {error, Reason}
OTP R15B01

get_options(OptionItems, Profile) ->
{ok, Values} | {error, Reason}
OTP R15B01

info() -> list() | {error, Reason}
OTP R15B02

info(Profile) -> list() | {error, Reason}
OTP R15B02

reset_cookies() -> Void
OTP R13B04

reset_cookies(Profile) -> Void
OTP R13B04

request(Url :: uri_string:uri_string()) ->
{ok, Result} | {error, term()}
OTP R13B04

request(Url, Profile) -> {ok, Result} | {error, term()}
OTP R13B04

request(Method, Request, HttpOptions, Options) ->
{ok, Result} | {error, term()}
OTP R13B04

request(Method, Request, HttpOptions, Options, Profile) ->
{ok, Result} | {error, term()}
OTP R13B04

set_options(Options) -> ok | {error, Reason}
OTP R13B04

set_options(Options, Profile) -> ok | {error, Reason}
OTP R13B04

ssl_verify_host_options(WildcardHostName) -> list()
OTP 25.1

store_cookies(SetCookieHeaders, Url) -> ok | {error, Reason}
OTP R14B02

store_cookies(SetCookieHeaders, Url, Profile) ->
ok | {error, Reason}
OTP R14B02

stream_next(Pid) -> ok
OTP R13B04

which_cookies() -> [CookieStores]
OTP R13B04

which_cookies(Profile) -> [CookieStores]
OTP R13B04

which_sessions() -> SessionInfo
OTP R15B02

which_sessions(Profile) -> SessionInfo
OTP R15B02