SSH

Reference Manual

Version 4.7

Table of Contents

ssh_connection

Module

ssh_connection

Module Summary

This module provides API functions to send SSH Connection Protocol events to the other side of an SSH channel.

Description

The SSH Connection Protocol is used by clients and servers, that is, SSH channels, to communicate over the SSH connection. The API functions in this module send SSH Connection Protocol events, which are received as messages by the remote channel. If the receiving channel is an Erlang process, the messages have the format {ssh_cm, connection_ref(), ssh_event_msg()}. If the ssh_client_channel behavior is used to implement the channel process, these messages are handled by handle_ssh_msg/2.

DATA TYPES

Type definitions that are used more than once in this module, or abstractions to indicate the intended use of the data type, or both:

boolean() =

true | false

string() =

list of ASCII characters

timeout() =

infinity | integer() in milliseconds

connection_ref() =

opaque() -as returned by ssh:connect/3 or sent to an SSH channel processes

channel_id() =

integer()

ssh_data_type_code() =

1 ("stderr") | 0 ("normal") are valid values, see RFC 4254 Section 5.2.

ssh_request_status() =

success | failure

event() =

{ssh_cm, connection_ref(), ssh_event_msg()}

ssh_event_msg() =

data_events() | status_events() | terminal_events()

reason() =

timeout | closed

data_events()
{data, channel_id(), ssh_data_type_code(), Data :: binary()}

Data has arrived on the channel. This event is sent as a result of calling ssh_connection:send/[3,4,5].

{eof, channel_id()}

Indicates that the other side sends no more data. This event is sent as a result of calling ssh_connection:send_eof/2.

status_events()
{signal, channel_id(), ssh_signal()}

A signal can be delivered to the remote process/service using the following message. Some systems do not support signals, in which case they are to ignore this message. There is currently no function to generate this event as the signals referred to are on OS-level and not something generated by an Erlang program.

{exit_signal, channel_id(), ExitSignal :: string(), ErrorMsg ::string(), LanguageString :: string()}

A remote execution can terminate violently because of a signal. Then this message can be received. For details on valid string values, see RFC 4254 Section 6.10, which shows a special case of these signals.

{exit_status, channel_id(), ExitStatus :: integer()}

When the command running at the other end terminates, the following message can be sent to return the exit status of the command. A zero exit_status usually means that the command terminated successfully. This event is sent as a result of calling ssh_connection:exit_status/3.

{closed, channel_id()}

This event is sent as a result of calling ssh_connection:close/2. Both the handling of this event and sending it are taken care of by the ssh_client_channel behavior.

terminal_events()

Channels implementing a shell and command execution on the server side are to handle the following messages that can be sent by client- channel processes.

Events that include a WantReply expect the event handling process to call ssh_connection:reply_request/4 with the boolean value of WantReply as the second argument.

{env, channel_id(), WantReply :: boolean(), Var ::string(), Value :: string()}

Environment variables can be passed to the shell/command to be started later. This event is sent as a result of calling ssh_connection:setenv/5.

{pty, channel_id(), WantReply :: boolean(), {Terminal :: string(), CharWidth :: integer(), RowHeight :: integer(), PixelWidth :: integer(), PixelHeight :: integer(), TerminalModes :: [{Opcode :: atom() | integer(), Value :: integer()}]}}

A pseudo-terminal has been requested for the session. Terminal is the value of the TERM environment variable value, that is, vt100. Zero dimension parameters must be ignored. The character/row dimensions override the pixel dimensions (when non-zero). Pixel dimensions refer to the drawable area of the window. Opcode in the TerminalModes list is the mnemonic name, represented as a lowercase Erlang atom, defined in RFC 4254, Section 8. It can also be an Opcode if the mnemonic name is not listed in the RFC. Example: OP code: 53, mnemonic name ECHO erlang atom: echo. This event is sent as a result of calling ssh_connection:ptty_alloc/4.

{shell, WantReply :: boolean()}

This message requests that the user default shell is started at the other end. This event is sent as a result of calling ssh_connection:shell/2.

{window_change, channel_id(), CharWidth() :: integer(), RowHeight :: integer(), PixWidth :: integer(), PixHeight :: integer()}

When the window (terminal) size changes on the client side, it can send a message to the server side to inform it of the new dimensions. No API function generates this event.

{exec, channel_id(), WantReply :: boolean(), Cmd :: string()}

This message requests that the server starts execution of the given command. This event is sent as a result of calling ssh_connection:exec/4.

Exports

Types

ConnectionRef = connection_ref()
ChannelId = channel_id()
NumOfBytes = integer()

Adjusts the SSH flow control window. This is to be done by both the client- and server-side channel processes.

Note

Channels implemented with the ssh_client_channel behavior do not normally need to call this function as flow control is handled by the behavior. The behavior adjusts the window every time the callback handle_ssh_msg/2 returns after processing channel data.

Types

ConnectionRef = connection_ref()
ChannelId = channel_id()

A server- or client-channel process can choose to close their session by sending a close event.

Note

This function is called by the ssh_client_channel behavior when the channel is terminated, see ssh_client_channel(3). Thus, channels implemented with the behavior are not to call this function explicitly.

Types

ConnectionRef = connection_ref()
ChannelId = channel_id()
Command = string()
Timeout = timeout()

Is to be called by a client-channel process to request that the server starts executing the given command. The result is several messages according to the following pattern. The last message is a channel close message, as the exec request is a one-time execution that closes the channel when it is done.

N x {ssh_cm, connection_ref(), {data, channel_id(), ssh_data_type_code(), Data :: binary()}}

The result of executing the command can be only one line or thousands of lines depending on the command.

0 or 1 x {ssh_cm, connection_ref(), {eof, channel_id()}}

Indicates that no more data is to be sent.

0 or 1 x {ssh_cm, connection_ref(), {exit_signal, channel_id(), ExitSignal :: string(), ErrorMsg :: string(), LanguageString :: string()}}

Not all systems send signals. For details on valid string values, see RFC 4254, Section 6.10

0 or 1 x {ssh_cm, connection_ref(), {exit_status, channel_id(), ExitStatus :: integer()}}

It is recommended by the SSH Connection Protocol to send this message, but that is not always the case.

1 x {ssh_cm, connection_ref(), {closed, channel_id()}}

Indicates that the ssh_client_channel started for the execution of the command has now been shut down.

Types

ConnectionRef = connection_ref()
ChannelId = channel_id()
Status = integer()

Is to be called by a server-channel process to send the exit status of a command to the client.

Types

ConnectionRef = connection_ref()
ChannelId = channel_id()
Options = proplists:proplist()

Sends an SSH Connection Protocol pty_req, to allocate a pseudo-terminal. Is to be called by an SSH client process.

Options:

{term, string()}

Defaults to os:getenv("TERM") or vt100 if it is undefined.

{width, integer()}

Defaults to 80 if pixel_width is not defined.

{height, integer()}

Defaults to 24 if pixel_height is not defined.

{pixel_width, integer()}

Is disregarded if width is defined.

{pixel_height, integer()}

Is disregarded if height is defined.

{pty_opts, [{posix_atom(), integer()}]}

Option can be an empty list. Otherwise, see possible POSIX names in Section 8 in RFC 4254.

Types

ConnectionRef = connection_ref()
WantReply = boolean()
Status = ssh_request_status()
ChannelId = channel_id()

Sends status replies to requests where the requester has stated that it wants a status report, that is, WantReply = true. If WantReply is false, calling this function becomes a "noop". Is to be called while handling an SSH Connection Protocol message containing a WantReply boolean value.

Types

ConnectionRef = connection_ref()
ChannelId = channel_id()
Data = binary()
Type = ssh_data_type_code()
Timeout = timeout()

Is to be called by client- and server-channel processes to send data to each other.

The function subsystem/4 and subsequent calls of send/3,4,5 must be executed in the same process.

Types

ConnectionRef = connection_ref()
ChannelId = channel_id()

Sends EOF on channel ChannelId.

Types

ConnectionRef = connection_ref()
InitialWindowSize = integer()
MaxPacketSize = integer()
Timeout = timeout()
Reason = term()

Opens a channel for an SSH session. The channel id returned from this function is the id used as input to the other functions in this module.

Types

ConnectionRef = connection_ref()
ChannelId = channel_id()
Var = string()
Value = string()
Timeout = timeout()

Environment variables can be passed before starting the shell/command. Is to be called by a client channel processes.

Types

ConnectionRef = connection_ref()
ChannelId = channel_id()

Is to be called by a client channel process to request that the user default shell (typically defined in /etc/passwd in Unix systems) is executed at the server end.

Note: the return value is ok instead of success unlike in other functions in this module. This is a fault that was introduced so long ago that any change would break a large number of existing software.

Types

ConnectionRef = connection_ref()
ChannelId = channel_id()
Subsystem = string()
Timeout = timeout()

Is to be called by a client-channel process for requesting to execute a predefined subsystem on the server.

The function subsystem/4 and subsequent calls of send/3,4,5 must be executed in the same process.