crypto

MODULE

crypto

MODULE SUMMARY

Crypto Functions

DESCRIPTION

This module provides a set of cryptographic functions.

References:

md4: The MD4 Message Digest Algorithm (RFC 1320)
md5: The MD5 Message Digest Algorithm (RFC 1321)
sha: Secure Hash Standard (FIPS 180-2)
hmac: Keyed-Hashing for Message Authentication (RFC 2104)
des: Data Encryption Standard (FIPS 46-3)
aes: Advanced Encryption Standard (AES) (FIPS 197)
ecb, cbc, cfb, ofb, ctr: Recommendation for Block Cipher Modes of Operation (NIST SP 800-38A).
rsa: Recommendation for Block Cipher Modes of Operation (NIST 800-38A)
dss: Digital Signature Standard (FIPS 186-2)

The above publications can be found at NIST publications, at IETF.

Types

byte() = 0 ... 255
ioelem() = byte() | binary() | iolist()
iolist() = [ioelem()]
Mpint() = <<ByteLen:32/integer-big, Bytes:ByteLen/binary>>

EXPORTS

start() -> ok

Starts the crypto server.

stop() -> ok

Stops the crypto server.

info() -> [atom()]

Provides the available crypto functions in terms of a list of atoms.

info_lib() -> [{Name,VerNum,VerStr}]

Types:

Name = binary()

VerNum = integer()

VerStr = binary()

Provides the name and version of the libraries used by crypto.

Name is the name of the library. VerNum is the numeric version according to the library's own versioning scheme. VerStr contains a text variant of the version.

> info_lib().
[{<<"OpenSSL">>,9469983,<<"OpenSSL 0.9.8a 11 Oct 2005">>}]

md4(Data) -> Digest

Types:

Data = iolist() | binary()

Digest = binary()

Computes an MD4 message digest from Data, where the length of the digest is 128 bits (16 bytes).

md4_init() -> Context

Types:

Context = binary()

Creates an MD4 context, to be used in subsequent calls to md4_update/2.

md4_update(Context, Data) -> NewContext

Types:

Data = iolist() | binary()

Context = NewContext = binary()

Updates an MD4 Context with Data, and returns a NewContext.

md4_final(Context) -> Digest

Types:

Context = Digest = binary()

Finishes the update of an MD4 Context and returns the computed MD4 message digest.

md5(Data) -> Digest

Types:

Data = iolist() | binary()

Digest = binary()

Computes an MD5 message digest from Data, where the length of the digest is 128 bits (16 bytes).

md5_init() -> Context

Types:

Context = binary()

Creates an MD5 context, to be used in subsequent calls to md5_update/2.

md5_update(Context, Data) -> NewContext

Types:

Data = iolist() | binary()

Context = NewContext = binary()

Updates an MD5 Context with Data, and returns a NewContext.

md5_final(Context) -> Digest

Types:

Context = Digest = binary()

Finishes the update of an MD5 Context and returns the computed MD5 message digest.

sha(Data) -> Digest

Types:

Data = iolist() | binary()

Digest = binary()

Computes an SHA message digest from Data, where the length of the digest is 160 bits (20 bytes).

sha_init() -> Context

Types:

Context = binary()

Creates an SHA context, to be used in subsequent calls to sha_update/2.

sha_update(Context, Data) -> NewContext

Types:

Data = iolist() | binary()

Context = NewContext = binary()

Updates an SHA Context with Data, and returns a NewContext.

sha_final(Context) -> Digest

Types:

Context = Digest = binary()

Finishes the update of an SHA Context and returns the computed SHA message digest.

hash(Type, Data) -> Digest

Types:

Type = md4 | md5 | sha | sha224 | sha256 | sha384 | sha512

Data = iodata()

Digest = binary()

Computes a message digest of type Type from Data.

hash_init(Type) -> Context

Types:

Type = md4 | md5 | sha | sha224 | sha256 | sha384 | sha512

Initializes the context for streaming hash operations. Type determines which digest to use. The returned context should be used as argument to hash_update.

hash_update(Context, Data) -> NewContext

Types:

Data = iodata()

Updates the digest represented by Context using the given Data. Context must have been generated using hash_init or a previous call to this function. Data can be any length. NewContext must be passed into the next call to hash_update or hash_final.

hash_final(Context) -> Digest

Types:

Digest = binary()

Finalizes the hash operation referenced by Context returned from a previous call to hash_update. The size of Digest is determined by the type of hash function used to generate it.

md5_mac(Key, Data) -> Mac

Types:

Key = Data = iolist() | binary()

Mac = binary()

Computes an MD5 MAC message authentification code from Key and Data, where the the length of the Mac is 128 bits (16 bytes).

md5_mac_96(Key, Data) -> Mac

Types:

Key = Data = iolist() | binary()

Mac = binary()

Computes an MD5 MAC message authentification code from Key and Data, where the length of the Mac is 96 bits (12 bytes).

hmac_init(Type, Key) -> Context

Types:

Type = sha | md5 | ripemd160

Key = iolist() | binary()

Context = binary()

Initializes the context for streaming HMAC operations. Type determines which hash function to use in the HMAC operation. Key is the authentication key. The key can be any length.

hmac_update(Context, Data) -> NewContext

Types:

Context = NewContext = binary()

Data = iolist() | binary()

Updates the HMAC represented by Context using the given Data. Context must have been generated using an HMAC init function (such as hmac_init). Data can be any length. NewContext must be passed into the next call to hmac_update.

hmac_final(Context) -> Mac

Types:

Context = Mac = binary()

Finalizes the HMAC operation referenced by Context. The size of the resultant MAC is determined by the type of hash function used to generate it.

hmac_final_n(Context, HashLen) -> Mac

Types:

Context = Mac = binary()

HashLen = non_neg_integer()

Finalizes the HMAC operation referenced by Context. HashLen must be greater than zero. Mac will be a binary with at most HashLen bytes. Note that if HashLen is greater than the actual number of bytes returned from the underlying hash, the returned hash will have fewer than HashLen bytes.

sha_mac(Key, Data) -> Mac
sha_mac(Key, Data, MacLength) -> Mac

Types:

Key = Data = iolist() | binary()

Mac = binary()

MacLenength = integer() =< 20

Computes an SHA MAC message authentification code from Key and Data, where the default length of the Mac is 160 bits (20 bytes).

sha_mac_96(Key, Data) -> Mac

Types:

Key = Data = iolist() | binary()

Mac = binary()

Computes an SHA MAC message authentification code from Key and Data, where the length of the Mac is 96 bits (12 bytes).

des_cbc_encrypt(Key, IVec, Text) -> Cipher

Types:

Key = Text = iolist() | binary()

IVec = Cipher = binary()

Encrypts Text according to DES in CBC mode. Text must be a multiple of 64 bits (8 bytes). Key is the DES key, and IVec is an arbitrary initializing vector. The lengths of Key and IVec must be 64 bits (8 bytes).

des_cbc_decrypt(Key, IVec, Cipher) -> Text

Types:

Key = Cipher = iolist() | binary()

IVec = Text = binary()

Decrypts Cipher according to DES in CBC mode. Key is the DES key, and IVec is an arbitrary initializing vector. Key and IVec must have the same values as those used when encrypting. Cipher must be a multiple of 64 bits (8 bytes). The lengths of Key and IVec must be 64 bits (8 bytes).

des_cbc_ivec(Data) -> IVec

Types:

Data = iolist() | binary()

IVec = binary()

Returns the IVec to be used in a next iteration of des_cbc_[encrypt|decrypt]. Data is the encrypted data from the previous iteration step.

des_cfb_encrypt(Key, IVec, Text) -> Cipher

Types:

Key = Text = iolist() | binary()

IVec = Cipher = binary()

Encrypts Text according to DES in 8-bit CFB mode. Key is the DES key, and IVec is an arbitrary initializing vector. The lengths of Key and IVec must be 64 bits (8 bytes).

des_cfb_decrypt(Key, IVec, Cipher) -> Text

Types:

Key = Cipher = iolist() | binary()

IVec = Text = binary()

Decrypts Cipher according to DES in 8-bit CFB mode. Key is the DES key, and IVec is an arbitrary initializing vector. Key and IVec must have the same values as those used when encrypting. The lengths of Key and IVec must be 64 bits (8 bytes).

des_cfb_ivec(IVec, Data) -> NextIVec

Types:

IVec = iolist() | binary()

Data = iolist() | binary()

NextIVec = binary()

Returns the IVec to be used in a next iteration of des_cfb_[encrypt|decrypt]. IVec is the vector used in the previous iteration step. Data is the encrypted data from the previous iteration step.

des3_cbc_encrypt(Key1, Key2, Key3, IVec, Text) -> Cipher

Types:

Key1 =Key2 = Key3 Text = iolist() | binary()

IVec = Cipher = binary()

Encrypts Text according to DES3 in CBC mode. Text must be a multiple of 64 bits (8 bytes). Key1, Key2, Key3, are the DES keys, and IVec is an arbitrary initializing vector. The lengths of each of Key1, Key2, Key3 and IVec must be 64 bits (8 bytes).

des3_cbc_decrypt(Key1, Key2, Key3, IVec, Cipher) -> Text

Types:

Key1 = Key2 = Key3 = Cipher = iolist() | binary()

IVec = Text = binary()

Decrypts Cipher according to DES3 in CBC mode. Key1, Key2, Key3 are the DES key, and IVec is an arbitrary initializing vector. Key1, Key2, Key3 and IVec must and IVec must have the same values as those used when encrypting. Cipher must be a multiple of 64 bits (8 bytes). The lengths of Key1, Key2, Key3, and IVec must be 64 bits (8 bytes).

des3_cfb_encrypt(Key1, Key2, Key3, IVec, Text) -> Cipher

Types:

Key1 =Key2 = Key3 Text = iolist() | binary()

IVec = Cipher = binary()

Encrypts Text according to DES3 in 8-bit CFB mode. Key1, Key2, Key3, are the DES keys, and IVec is an arbitrary initializing vector. The lengths of each of Key1, Key2, Key3 and IVec must be 64 bits (8 bytes).

des3_cfb_decrypt(Key1, Key2, Key3, IVec, Cipher) -> Text

Types:

Key1 = Key2 = Key3 = Cipher = iolist() | binary()

IVec = Text = binary()

Decrypts Cipher according to DES3 in 8-bit CFB mode. Key1, Key2, Key3 are the DES key, and IVec is an arbitrary initializing vector. Key1, Key2, Key3 and IVec must and IVec must have the same values as those used when encrypting. The lengths of Key1, Key2, Key3, and IVec must be 64 bits (8 bytes).

des_ecb_encrypt(Key, Text) -> Cipher

Types:

Key = Text = iolist() | binary()

Cipher = binary()

Encrypts Text according to DES in ECB mode. Key is the DES key. The lengths of Key and Text must be 64 bits (8 bytes).

des_ecb_decrypt(Key, Cipher) -> Text

Types:

Key = Cipher = iolist() | binary()

Text = binary()

Decrypts Cipher according to DES in ECB mode. Key is the DES key. The lengths of Key and Cipher must be 64 bits (8 bytes).

blowfish_ecb_encrypt(Key, Text) -> Cipher

Types:

Key = Text = iolist() | binary()

Cipher = binary()

Encrypts the first 64 bits of Text using Blowfish in ECB mode. Key is the Blowfish key. The length of Text must be at least 64 bits (8 bytes).

blowfish_ecb_decrypt(Key, Text) -> Cipher

Types:

Key = Text = iolist() | binary()

Cipher = binary()

Decrypts the first 64 bits of Text using Blowfish in ECB mode. Key is the Blowfish key. The length of Text must be at least 64 bits (8 bytes).

blowfish_cbc_encrypt(Key, IVec, Text) -> Cipher

Types:

Key = Text = iolist() | binary()

IVec = Cipher = binary()

Encrypts Text using Blowfish in CBC mode. Key is the Blowfish key, and IVec is an arbitrary initializing vector. The length of IVec must be 64 bits (8 bytes). The length of Text must be a multiple of 64 bits (8 bytes).

blowfish_cbc_decrypt(Key, IVec, Text) -> Cipher

Types:

Key = Text = iolist() | binary()

IVec = Cipher = binary()

Decrypts Text using Blowfish in CBC mode. Key is the Blowfish key, and IVec is an arbitrary initializing vector. The length of IVec must be 64 bits (8 bytes). The length of Text must be a multiple 64 bits (8 bytes).

blowfish_cfb64_encrypt(Key, IVec, Text) -> Cipher

Types:

Key = Text = iolist() | binary()

IVec = Cipher = binary()

Encrypts Text using Blowfish in CFB mode with 64 bit feedback. Key is the Blowfish key, and IVec is an arbitrary initializing vector. The length of IVec must be 64 bits (8 bytes).

blowfish_cfb64_decrypt(Key, IVec, Text) -> Cipher

Types:

Key = Text = iolist() | binary()

IVec = Cipher = binary()

Decrypts Text using Blowfish in CFB mode with 64 bit feedback. Key is the Blowfish key, and IVec is an arbitrary initializing vector. The length of IVec must be 64 bits (8 bytes).

blowfish_ofb64_encrypt(Key, IVec, Text) -> Cipher

Types:

Key = Text = iolist() | binary()

IVec = Cipher = binary()

Encrypts Text using Blowfish in OFB mode with 64 bit feedback. Key is the Blowfish key, and IVec is an arbitrary initializing vector. The length of IVec must be 64 bits (8 bytes).

aes_cfb_128_encrypt(Key, IVec, Text) -> Cipher

Types:

Key = Text = iolist() | binary()

IVec = Cipher = binary()

Encrypts Text according to AES in Cipher Feedback mode (CFB). Key is the AES key, and IVec is an arbitrary initializing vector. The lengths of Key and IVec must be 128 bits (16 bytes).

aes_cfb_128_decrypt(Key, IVec, Cipher) -> Text

Types:

Key = Cipher = iolist() | binary()

IVec = Text = binary()

Decrypts Cipher according to AES in Cipher Feedback Mode (CFB). Key is the AES key, and IVec is an arbitrary initializing vector. Key and IVec must have the same values as those used when encrypting. The lengths of Key and IVec must be 128 bits (16 bytes).

aes_cbc_128_encrypt(Key, IVec, Text) -> Cipher

Types:

Key = Text = iolist() | binary()

IVec = Cipher = binary()

Encrypts Text according to AES in Cipher Block Chaining mode (CBC). Text must be a multiple of 128 bits (16 bytes). Key is the AES key, and IVec is an arbitrary initializing vector. The lengths of Key and IVec must be 128 bits (16 bytes).

aes_cbc_128_decrypt(Key, IVec, Cipher) -> Text

Types:

Key = Cipher = iolist() | binary()

IVec = Text = binary()

Decrypts Cipher according to AES in Cipher Block Chaining mode (CBC). Key is the AES key, and IVec is an arbitrary initializing vector. Key and IVec must have the same values as those used when encrypting. Cipher must be a multiple of 128 bits (16 bytes). The lengths of Key and IVec must be 128 bits (16 bytes).

aes_cbc_ivec(Data) -> IVec

Types:

Data = iolist() | binary()

IVec = binary()

Returns the IVec to be used in a next iteration of aes_cbc_*_[encrypt|decrypt]. Data is the encrypted data from the previous iteration step.

aes_ctr_encrypt(Key, IVec, Text) -> Cipher

Types:

Key = Text = iolist() | binary()

IVec = Cipher = binary()

Encrypts Text according to AES in Counter mode (CTR). Text can be any number of bytes. Key is the AES key and must be either 128, 192 or 256 bits long. IVec is an arbitrary initializing vector of 128 bits (16 bytes).

aes_ctr_decrypt(Key, IVec, Cipher) -> Text

Types:

Key = Cipher = iolist() | binary()

IVec = Text = binary()

Decrypts Cipher according to AES in Counter mode (CTR). Cipher can be any number of bytes. Key is the AES key and must be either 128, 192 or 256 bits long. IVec is an arbitrary initializing vector of 128 bits (16 bytes).

aes_ctr_stream_init(Key, IVec) -> State

Types:

State = { K, I, E, C }

Key = K = iolist()

IVec = I = E = binary()

C = integer()

Initializes the state for use in streaming AES encryption using Counter mode (CTR). Key is the AES key and must be either 128, 192, or 256 bts long. IVec is an arbitrary initializing vector of 128 bits (16 bytes). This state is for use with aes_ctr_stream_encrypt and aes_ctr_stream_decrypt.

aes_ctr_stream_encrypt(State, Text) -> { NewState, Cipher}

Types:

Text = iolist() | binary()

Cipher = binary()

Encrypts Text according to AES in Counter mode (CTR). This function can be used to encrypt a stream of text using a series of calls instead of requiring all text to be in memory. Text can be any number of bytes. State is initialized using aes_ctr_stream_init. NewState is the new streaming encryption state that must be passed to the next call to aes_ctr_stream_encrypt. Cipher is the encrypted cipher text.

aes_ctr_stream_decrypt(State, Cipher) -> { NewState, Text }

Types:

Cipher = iolist() | binary()

Text = binary()

Decrypts Cipher according to AES in Counter mode (CTR). This function can be used to decrypt a stream of ciphertext using a series of calls instead of requiring all ciphertext to be in memory. Cipher can be any number of bytes. State is initialized using aes_ctr_stream_init. NewState is the new streaming encryption state that must be passed to the next call to aes_ctr_stream_encrypt. Text is the decrypted data.

erlint(Mpint) -> N
mpint(N) -> Mpint

Types:

Mpint = binary()

N = integer()

Convert a binary multi-precision integer Mpint to and from an erlang big integer. A multi-precision integer is a binary with the following form: <<ByteLen:32/integer, Bytes:ByteLen/binary>> where both ByteLen and Bytes are big-endian. Mpints are used in some of the functions in crypto and are not translated in the API for performance reasons.

rand_bytes(N) -> binary()

Types:

N = integer()

Generates N bytes randomly uniform 0..255, and returns the result in a binary. Uses the crypto library pseudo-random number generator.

strong_rand_bytes(N) -> binary()

Types:

N = integer()

Generates N bytes randomly uniform 0..255, and returns the result in a binary. Uses a cryptographically secure prng seeded and periodically mixed with operating system provided entropy. By default this is the RAND_bytes method from OpenSSL.

May throw exception low_entropy in case the random generator failed due to lack of secure "randomness".

rand_uniform(Lo, Hi) -> N

Types:

Lo, Hi, N = Mpint | integer()

Mpint = binary()

Generate a random number N, Lo =< N < Hi. Uses the crypto library pseudo-random number generator. The arguments (and result) can be either erlang integers or binary multi-precision integers. Hi must be larger than Lo.

strong_rand_mpint(N, Top, Bottom) -> Mpint

Types:

N = non_neg_integer()

Top = -1 | 0 | 1

Bottom = 0 | 1

Mpint = binary()

Generate an N bit random number using OpenSSL's cryptographically strong pseudo random number generator BN_rand.

The parameter Top places constraints on the most significant bits of the generated number. If Top is 1, then the two most significant bits will be set to 1, if Top is 0, the most significant bit will be 1, and if Top is -1 then no constraints are applied and thus the generated number may be less than N bits long.

If Bottom is 1, then the generated number is constrained to be odd.

May throw exception low_entropy in case the random generator failed due to lack of secure "randomness".

mod_exp(N, P, M) -> Result

Types:

N, P, M, Result = Mpint

Mpint = binary()

This function performs the exponentiation N ^ P mod M, using the crypto library.

rsa_sign(DataOrDigest, Key) -> Signature
rsa_sign(DigestType, DataOrDigest, Key) -> Signature

Types:

DataOrDigest = Data | {digest,Digest}

Data = Mpint

Digest = binary()

Key = [E, N, D] | [E, N, D, P1, P2, E1, E2, C]

E, N, D = Mpint

Where E is the public exponent, N is public modulus and D is the private exponent.

P1, P2, E1, E2, C = Mpint

The longer key format contains redundant information that will make the calculation faster. P1,P2 are first and second prime factors. E1,E2 are first and second exponents. C is the CRT coefficient. Terminology is taken from RFC 3447.

DigestType = md5 | sha | sha224 | sha256 | sha384 | sha512

The default DigestType is sha.

Mpint = binary()

Signature = binary()

Creates a RSA signature with the private key Key of a digest. The digest is either calculated as a DigestType digest of Data or a precalculated binary Digest.

rsa_verify(DataOrDigest, Signature, Key) -> Verified
rsa_verify(DigestType, DataOrDigest, Signature, Key) -> Verified

Types:

Verified = boolean()

DataOrDigest = Data | {digest|Digest}

Data, Signature = Mpint

Digest = binary()

Key = [E, N]

E, N = Mpint

Where E is the public exponent and N is public modulus.

DigestType = md5 | sha | sha224 | sha256 | sha384 | sha512

The default DigestType is sha.

Mpint = binary()

Verifies that a digest matches the RSA signature using the signer's public key Key. The digest is either calculated as a DigestType digest of Data or a precalculated binary Digest.

May throw exception notsup in case the chosen DigestType is not supported by the underlying OpenSSL implementation.

rsa_public_encrypt(PlainText, PublicKey, Padding) -> ChipherText

Types:

PlainText = binary()

PublicKey = [E, N]

E, N = Mpint

Where E is the public exponent and N is public modulus.

Padding = rsa_pkcs1_padding | rsa_pkcs1_oaep_padding | rsa_no_padding

ChipherText = binary()

Encrypts the PlainText (usually a session key) using the PublicKey and returns the cipher. The Padding decides what padding mode is used, rsa_pkcs1_padding is PKCS #1 v1.5 currently the most used mode and rsa_pkcs1_oaep_padding is EME-OAEP as defined in PKCS #1 v2.0 with SHA-1, MGF1 and an empty encoding parameter. This mode is recommended for all new applications. The size of the Msg must be less than byte_size(N)-11 if rsa_pkcs1_padding is used, byte_size(N)-41 if rsa_pkcs1_oaep_padding is used and byte_size(N) if rsa_no_padding is used. Where byte_size(N) is the size part of an Mpint-1.

rsa_private_decrypt(ChipherText, PrivateKey, Padding) -> PlainText

Types:

ChipherText = binary()

PrivateKey = [E, N, D] | [E, N, D, P1, P2, E1, E2, C]

E, N, D = Mpint

Where E is the public exponent, N is public modulus and D is the private exponent.

P1, P2, E1, E2, C = Mpint

Padding = rsa_pkcs1_padding | rsa_pkcs1_oaep_padding | rsa_no_padding

PlainText = binary()

Decrypts the ChipherText (usually a session key encrypted with rsa_public_encrypt/3) using the PrivateKey and returns the message. The Padding is the padding mode that was used to encrypt the data, see rsa_public_encrypt/3.

rsa_private_encrypt(PlainText, PrivateKey, Padding) -> ChipherText

Types:

PlainText = binary()

PrivateKey = [E, N, D] | [E, N, D, P1, P2, E1, E2, C]

E, N, D = Mpint

Where E is the public exponent, N is public modulus and D is the private exponent.

P1, P2, E1, E2, C = Mpint

Padding = rsa_pkcs1_padding | rsa_no_padding

ChipherText = binary()

Encrypts the PlainText using the PrivateKey and returns the cipher. The Padding decides what padding mode is used, rsa_pkcs1_padding is PKCS #1 v1.5 currently the most used mode. The size of the Msg must be less than byte_size(N)-11 if rsa_pkcs1_padding is used, and byte_size(N) if rsa_no_padding is used. Where byte_size(N) is the size part of an Mpint-1.

rsa_public_decrypt(ChipherText, PublicKey, Padding) -> PlainText

Types:

ChipherText = binary()

PublicKey = [E, N]

E, N = Mpint

Where E is the public exponent and N is public modulus

Padding = rsa_pkcs1_padding | rsa_no_padding

PlainText = binary()

Decrypts the ChipherText (encrypted with rsa_private_encrypt/3) using the PrivateKey and returns the message. The Padding is the padding mode that was used to encrypt the data, see rsa_private_encrypt/3.

dss_sign(DataOrDigest, Key) -> Signature
dss_sign(DigestType, DataOrDigest, Key) -> Signature

Types:

DigestType = sha

DataOrDigest = Mpint | {digest,Digest}

Key = [P, Q, G, X]

P, Q, G, X = Mpint

Where P, Q and G are the dss parameters and X is the private key.

Digest = binary() with length 20 bytes

Signature = binary()

Creates a DSS signature with the private key Key of a digest. The digest is either calculated as a SHA1 digest of Data or a precalculated binary Digest.

A deprecated feature is having DigestType = 'none' in which case DataOrDigest is a precalculated SHA1 digest.

dss_verify(DataOrDigest, Signature, Key) -> Verified
dss_verify(DigestType, DataOrDigest, Signature, Key) -> Verified

Types:

Verified = boolean()

DigestType = sha

DataOrDigest = Mpint | {digest,Digest}

Data = Mpint | ShaDigest

Signature = Mpint

Key = [P, Q, G, Y]

P, Q, G, Y = Mpint

Where P, Q and G are the dss parameters and Y is the public key.

Digest = binary() with length 20 bytes

Verifies that a digest matches the DSS signature using the public key Key. The digest is either calculated as a SHA1 digest of Data or is a precalculated binary Digest.

A deprecated feature is having DigestType = 'none' in which case DataOrDigest is a precalculated SHA1 digest binary.

rc2_cbc_encrypt(Key, IVec, Text) -> Cipher

Types:

Key = Text = iolist() | binary()

Ivec = Cipher = binary()

Encrypts Text according to RC2 in CBC mode.

rc2_cbc_decrypt(Key, IVec, Cipher) -> Text

Types:

Key = Text = iolist() | binary()

Ivec = Cipher = binary()

Decrypts Cipher according to RC2 in CBC mode.

rc4_encrypt(Key, Data) -> Result

Types:

Key, Data = iolist() | binary()

Result = binary()

Encrypts the data with RC4 symmetric stream encryption. Since it is symmetric, the same function is used for decryption.

dh_generate_key(DHParams) -> {PublicKey,PrivateKey}
dh_generate_key(PrivateKey, DHParams) -> {PublicKey,PrivateKey}

Types:

DHParameters = [P, G]

P, G = Mpint

Where P is the shared prime number and G is the shared generator.

PublicKey, PrivateKey = Mpint()

Generates a Diffie-Hellman PublicKey and PrivateKey (if not given).

dh_compute_key(OthersPublicKey, MyPrivateKey, DHParams) -> SharedSecret

Types:

DHParameters = [P, G]

P, G = Mpint

Where P is the shared prime number and G is the shared generator.

OthersPublicKey, MyPrivateKey = Mpint()

SharedSecret = binary()

Computes the shared secret from the private key and the other party's public key.

exor(Data1, Data2) -> Result

Types:

Data1, Data2 = iolist() | binary()

Result = binary()

Performs bit-wise XOR (exclusive or) on the data supplied.

DES in CBC mode

The Data Encryption Standard (DES) defines an algorithm for encrypting and decrypting an 8 byte quantity using an 8 byte key (actually only 56 bits of the key is used).

When it comes to encrypting and decrypting blocks that are multiples of 8 bytes various modes are defined (NIST SP 800-38A). One of those modes is the Cipher Block Chaining (CBC) mode, where the encryption of an 8 byte segment depend not only of the contents of the segment itself, but also on the result of encrypting the previous segment: the encryption of the previous segment becomes the initializing vector of the encryption of the current segment.

Thus the encryption of every segment depends on the encryption key (which is secret) and the encryption of the previous segment, except the first segment which has to be provided with an initial initializing vector. That vector could be chosen at random, or be a counter of some kind. It does not have to be secret.

The following example is drawn from the old FIPS 81 standard (replaced by NIST SP 800-38A), where both the plain text and the resulting cipher text is settled. The following code fragment returns `true'.


      Key = <<16#01,16#23,16#45,16#67,16#89,16#ab,16#cd,16#ef>>,
      IVec = <<16#12,16#34,16#56,16#78,16#90,16#ab,16#cd,16#ef>>,
      P = "Now is the time for all ",
      C = crypto:des_cbc_encrypt(Key, IVec, P),
         % Which is the same as 
      P1 = "Now is t", P2 = "he time ", P3 = "for all ",
      C1 = crypto:des_cbc_encrypt(Key, IVec, P1),
      C2 = crypto:des_cbc_encrypt(Key, C1, P2),
      C3 = crypto:des_cbc_encrypt(Key, C2, P3),

      C = <<C1/binary, C2/binary, C3/binary>>,
      C = <<16#e5,16#c7,16#cd,16#de,16#87,16#2b,16#f2,16#7c,
             16#43,16#e9,16#34,16#00,16#8c,16#38,16#9c,16#0f,
             16#68,16#37,16#88,16#49,16#9a,16#7c,16#05,16#f6>>,
      <<"Now is the time for all ">> == 
                        crypto:des_cbc_decrypt(Key, IVec, C).

The following is true for the DES CBC mode. For all decompositions P1 ++ P2 = P of a plain text message P (where the length of all quantities are multiples of 8 bytes), the encryption C of P is equal to C1 ++ C2, where C1 is obtained by encrypting P1 with Key and the initializing vector IVec, and where C2 is obtained by encrypting P2 with Key and the initializing vector last8(C1), where last(Binary) denotes the last 8 bytes of the binary Binary.

Similarly, for all decompositions C1 ++ C2 = C of a cipher text message C (where the length of all quantities are multiples of 8 bytes), the decryption P of C is equal to P1 ++ P2, where P1 is obtained by decrypting C1 with Key and the initializing vector IVec, and where P2 is obtained by decrypting C2 with Key and the initializing vector last8(C1), where last8(Binary) is as above.

For DES3 (which uses three 64 bit keys) the situation is the same.