Erlang logo
User's Guide
Reference Manual
Release Notes
PDF
Top

ic
User's Guide
Version 4.2.26


Expand All
Contract All

Chapters

10 IDL to Java language Mapping

10.1  Introduction

This chapter describes the mapping of OMG IDL constructs to the Java programming language for the generation of native Java - Erlang communication.

This language mapping defines the following:

  • All OMG IDL basic types

  • All OMG IDL constructed types

  • References to constants defined in OMG IDL

  • Invocations of operations, including passing of parameters and receiving of result

  • Access to attributes

10.2  Specialties in the Mapping

Names Reserved by the Compiler

The IDL compiler reserves all identifiers starting with OE_ and oe_ for internal use.

10.3  Basic OMG IDL Types

The mapping of basic types are according to the standard. All basic types have a special Holder class.

OMG IDL type Java type
float float
double double
short short
unsigned short short
long int
long long long
unsigned long long
unsigned long long long
char char
wchar char
boolean boolean
octet octet
string java.lang.String
wstring java.lang.String
any Any
long double Not supported
Object Not supported
void void
Table 10.1:   OMG IDL basic types

10.4  Constructed OMG IDL Types

All constructed types are according to the standard with three (3) major exceptions.

  • The IDL Exceptions are not implemented in this Java mapping.

  • The functions used for read/write to streams, defined in Helper functions are named unmarshal (instead for read) and marshal (instead for write).

  • The streams used in Helper functions are OtpInputStream for input and OtpOutputStream for output.

10.5  Mapping for Constants

Constants are mapped according to the standard.

10.6  Invocations of Operations

Operation invocation is implemented according to the standard. The implementation is in the class _<nterfacename>Stub.java which implements the interface in <nterfacename>.java.

test._iStub client;

client.op(10);
    

Operation Implementation

The server is implemented through extension of the class _<nterfacename>ImplBase.java and implementation of all the methods in the interface.

public class server extends test._iImplBase {
  
  public void op(int i) throws java.lang.Exception {
    System.out.println("Received call op()");
    o.value = i;
    return i;
  }

}
      

10.7  Exceptions

While exception mapping is not implemented, the stubs will generate some Java exceptions in case of operation failure. No exceptions are propagated through the communication.

10.8  Access to Attributes

Attributes are supported according to the standard.

10.9  Summary of Argument/Result Passing for Java

All types (in, out or inout) of user defined parameters are supported in the Java mapping. This is also the case in the Erlang mappings but not in the C mapping. inout parameters are not supported in the C mapping so if you are going to do calls to or from a C program inout cannot be used in the IDL specifications.

out and inout parameters must be of Holder types. There is a jar file ( ic.jar) with Holder classes for the basic types in the ic application. This library is in the directory $OTPROOT/lib/ic_<version number>/priv.

10.10  Communication Toolbox

The generated client and server stubs use the classes defined in the jinterface package to communicate with other nodes. The most important classes are :

  • OtpInputStream which is the stream class used for incoming message storage

  • OtpOutputStream which is the stream class used for outgoing message storage

  • OtpErlangPid which is the process identification class used to identify processes inside a java node.

    The recommended constructor function for the OtpErlangPid is OtpErlangPid(String node, int id, int serial, int creation) where :

    • String node, is the name of the node where this process runs.

    • int id, is the identification number for this identity.

    • int serial, internal information, must be an 18-bit integer.

    • int creation, internal information, must have value in range 0..3.

  • OtpConnection which is used to define a connection between nodes.

    While the connection object is stub side constructed in client stubs, it is returned after calling the accept function from an OtpErlangServer object in server stubs. The following methods used for node connection :

    • OtpInputStream receiveBuf(), which returns the incoming streams that contain the message arrived.

    • void sendBuf(OtpErlangPid client, OtpOutputStream reply), which sends a reply message (in an OtpOutputStream form) to the client node.

    • void close(), which closes a connection.

  • OtpServer which is used to define a server node.

    The recommended constructor function for the OtpServer is :

    • OtpServer(String node, String cookie). where :

      • node is the requested name for the new java node, represented as a String object.

      • cookie is the requested cookie name for the new java node, represented as a String object.

    The following methods used for node registration and connection acceptance :

    • boolean publishPort(), which registers the server node to epmd daemon.

    • OtpConnection accept(), which waits for a connection and returns the OtpConnection object which is unique for each client node.

10.11  The Package com.ericsson.otp.ic

The package com.ericsson.otp.ic contains a number of java classes specially designed for the IC generated java-back-ends :

  • Standard java classes defined through OMG-IDL java mapping :

  • Implementation-dependant classes :

  • Erlang compatibility classes :

    • Pid, PidHelper, PidHolder

      The Pid class originates from OtpErlangPid and is used to represent the Erlang built-in pid type, a process's identity. PidHelper and PidHolder are helper respectively holder classes for Pid.

    • Ref, RefHelper, RefHolder

      The Ref class originates from OtpErlangRef and is used to represent the Erlang built-in ref type, an Erlang reference. RefHelper and RefHolder are helper respectively holder classes for Ref.

    • Port, PortHelper, PortHolder

      The Port class originates from OtpErlangPort and is used to represent the Erlang built-in port type, an Erlang port. PortHelper and PortHolder are helper respectively holder classes for Port.

    • Term, TermHelper, TermHolder

      The Term class originates from Any and is used to represent the Erlang built-in term type, an Erlang term. TermHelper and TermHolder are helper respectively holder classes for Term.

    To use the Erlang build-in classes, you will have to include the file erlang.idl located under $OTPROOT/lib/ic/include.

10.12  The Term Class

The Term class is intended to represent the Erlang term generic type. It extends the Any class and it is basically used in the same way as in the Any type.

The big difference between Term and Any is the use of guard methods instead of TypeCode to determine the data included in the Term. This is especially true when the Term's value class cannot be determined at compilation time. The guard methods found in Term :

  • boolean isAtom() returns true if the Term is an OtpErlangAtom, false otherwise

  • boolean isConstant() returns true if the Term is neither an OtpErlangList nor an OtpErlangTuple, false otherwise

  • boolean isFloat() returns true if the Term is an OtpErlangFloat, false otherwise

  • boolean isInteger() returns true if the Term is an OtpErlangInt, false otherwise

  • boolean isList() returns true if the Term is an OtpErlangList, false otherwise

  • boolean isString() returns true if the Term is an OtpErlangString, false otherwise

  • boolean isNumber() returns true if the Term is an OtpErlangInteger or an OtpErlangFloat, false otherwise

  • boolean isPid() returns true if the Term is an OtpErlangPid or Pid, false otherwise

  • boolean isPort() returns true if the Term is an OtpErlangPort or Port, false otherwise

  • boolean isReference() returns true if the Term is an OtpErlangRef, false otherwise

  • boolean isTuple() returns true if the Term is an OtpErlangTuple, false otherwise

  • boolean isBinary() returns true if the Term is an OtpErlangBinary, false otherwise

10.13  Stub File Types

For each interface, three (3) stub/skeleton files are generated :

  • A java interface file, named after the idl interface.

  • A client stub file, named after the convention _< interface name >Stub which implements the java interface. Example : _stackStub.java

  • A server stub file, named after the convention _< interface name >ImplBase which implements the java interface. Example : _stackImplBase.java

10.14  Client Stub Initialization, Methods Exported

The recommended constructor function for client stubs accepts four (4) parameters :

  • String selfNode, the node identification name to be used in the new client node.

  • String peerNode, the node identification name where the client process is running.

  • String cookie, the cookie to be used.

  • Object server, where the java Object can be one of:

    • OtpErlangPid, the server's process identity under the node where the server process is running.

    • String, the server's registered name under the node where the server process is running.

The methods exported from the generated client stub are :

  • void __disconnect(), which disconnects the server connection.

  • void __reconnect(), which disconnects the server connection if open, and then connects to the same peer.

  • void __stop(), which sends the standard stop termination call. When connected to an Erlang server, the server will be terminated. When connected to a java server, this will set a stop flag that denotes that the server must be terminated.

  • com.ericsson.otp.erlang.OtpErlangRef __getRef(), will return the message reference received from a server that denotes which call it is referring to. This is useful when building asynchronous clients.

  • java.lang.Object __server(), which returns the server for the current connection.

10.15  Server Skeleton Initialization, Server Stub Implementation, Methods Exported

The constructor function for server skeleton accepts no parameters.

The server skeleton file contains a server switch which decodes messages from the input stream and calls implementation (callback) functions. As the server skeleton is declared abstract, the application programmer will have to create a stub class that extends the skeleton file. In this class, all operations defined in the interface class, generated under compiling the idl file, are implemented.

The server skeleton file exports the following methods:

  • OtpOutputStrem invoke(OtpInputStream request), where the input stream request is unmarshalled, the implementation function is called and a reply stream is marshalled.

  • boolean __isStopped(), which returns true if a stop message is received. The implementation of the stub should always check if such a message is received and terminate if so.

  • boolean __isStopped(com.ericsson.otp.ic.Environment), which returns true if a stop message is received for a certain Environment and Connection. The implementation of the stub should always check if such a message is received and terminate if so.

  • OtpErlangPid __getCallerPid(), which returns the caller identity for the latest call.

  • OtpErlangPid __getCallerPid(com.ericsson.otp.ic.Environment), which returns the caller identity for the latest call on a certain Environment.

  • java.util.Dictionary __operations(), which returns the operation dictionary which holds all operations supported by the server skeleton.

10.16  A Mapping Example

This is a small example of a simple stack. There are two operations on the stack, push and pop. The example shows some of the generated files.

// The source IDL file: stack.idl

struct s {
      long l;
      string s;
};

interface stack {
    void push(in s val);
    s pop();
};
    

When this file is compiled it produces eight files. Three important files are shown below.

The public interface is in stack.java.


public interface stack {

/****
 * Operation "stack::push" interface functions 
 *
 */

    void push(s val) throws java.lang.Exception;

/****
 * Operation "stack::pop" interface functions 
 *
 */

    s pop() throws java.lang.Exception;

}
    

For the IDL struct s three files are generated, a public class in s.java.


final public class s {
   // instance variables
   public int l;
   public java.lang.String s;

   // constructors
   public s() {};
   public s(int _l, java.lang.String _s) {
     l = _l;
     s = _s;
   };

};
    

A holder class in sHolder.java and a helper class in sHelper.java. The helper class is used for marshalling.


public class sHelper {

   // constructors
   private sHelper() {};

   // methods
   public static s unmarshal(OtpInputStream in) 
      throws java.lang.Exception {
        :
        :
   };

   public static void marshal(OtpOutputStream out, s value) 
      throws java.lang.Exception {
        :
        :
   };

};
    

10.17  Running the Compiled Code

When using the generated java code you must have added $OTPROOT/lib/ic_<version number>/priv and $OTPROOT/lib/jinterface_<version number>/priv to your CLASSPATH variable to get basic Holder types and the communication classes.