supervisor

A behaviour module for implementing a supervisor, a process which supervises other processes called child processes. A child process can either be another supervisor or a worker process. Worker processes are normally implemented using one of the gen_event, gen_fsm, or gen_server behaviours. A supervisor implemented using this module will have a standard set of interface functions and include functionality for tracing and error reporting. Supervisors are used to build an hierarchical process structure called a supervision tree, a nice way to structure a fault tolerant application. Refer to OTP Design Principles for more information.

A supervisor assumes the definition of which child processes to supervise to be located in a callback module exporting a pre-defined set of functions.

Unless otherwise stated, all functions in this module will fail if the specified supervisor does not exist or if bad arguments are given.

The supervisor is responsible for starting, stopping and monitoring its child processes. The basic idea of a supervisor is that it should keep its child processes alive by restarting them when necessary.

The children of a supervisor is defined as a list of child specifications. When the supervisor is started, the child processes are started in order from left to right according to this list. When the supervisor terminates, it first terminates its child processes in reversed start order, from right to left.

A supervisor can have one of the following restart strategies:

• one_for_one - if one child process terminates and should be restarted, only that child process is affected.

• one_for_all - if one child process terminates and should be restarted, all other child processes are terminated and then all child processes are restarted.

• rest_for_one - if one child process terminates and should be restarted, the 'rest' of the child processes -- i.e. the child processes after the terminated child process in the start order -- are terminated. Then the terminated child process and all child processes after it are restarted.

• simple_one_for_one - a simplified one_for_one supervisor, where all child processes are dynamically added instances of the same process type, i.e. running the same code.

  The functions terminate_child/2, delete_child/2 and restart_child/2 are invalid for simple_one_for_one supervisors and will return {error,simple_one_for_one} if the specified supervisor uses this restart strategy.

To prevent a supervisor from getting into an infinite loop of child process terminations and restarts, a maximum restart frequency is defined using two integer values MaxR and MaxT. If more than MaxR restarts occur within MaxT seconds, the supervisor terminates all child processes and then itself.

This is the type definition of a child specification:

child_spec() = {Id,StartFunc,Restart,Shutdown,Type,Modules}
 Id = term()
 StartFunc = {M,F,A}
  M = F = atom()
  A = [term()]
 Restart = permanent | transient | temporary
 Shutdown = brutal_kill | int()>=0 | infinity
 Type = worker | supervisor
 Modules = [Module] | dynamic
  Module = atom()

• Id is a name that is used to identify the child specification internally by the supervisor.

• StartFunc defines the function call used to start the child process. It should be a module-function-arguments tuple {M,F,A} used as apply(M,F,A).

  
  

  The start function must create and link to the child process, and should return {ok,Child} or {ok,Child,Info} where Child is the pid of the child process and Info an arbitrary term which is ignored by the supervisor.

  
  

  The start function can also return ignore if the child process for some reason cannot be started, in which case the child specification will be kept by the supervisor but the non-existing child process will be ignored.

  
  

  If something goes wrong, the function may also return an error tuple {error,Error}.

  
  

  Note that the start_link functions of the different behaviour modules fulfill the above requirements.

• Restart defines when a terminated child process should be restarted. A permanent child process should always be restarted, a temporary child process should never be restarted and a transient child process should be restarted only if it terminates abnormally, i.e. with another exit reason than normal.

• Shutdown defines how a child process should be terminated. brutal_kill means the child process will be unconditionally terminated using exit(Child,kill). An integer timeout value means that the supervisor will tell the child process to terminate by calling exit(Child,shutdown) and then wait for an exit signal with reason shutdown back from the child process. If no exit signal is received within the specified time, the child process is unconditionally terminated using exit(Child,kill).

  If the child process is another supervisor, Shutdown should be set to infinity to give the subtree ample time to shutdown.

  Important note on simple-one-for-one supervisors: The dynamically created child processes of a simple-one-for-one supervisor are not explicitly killed, regardless of shutdown strategy, but are expected to terminate when the supervisor does (that is, when an exit signal from the parent process is received).

  Note that all child processes implemented using the standard OTP behavior modules automatically adhere to the shutdown protocol.

• Type specifies if the child process is a supervisor or a worker.

• Modules is used by the release handler during code replacement to determine which processes are using a certain module. As a rule of thumb Modules should be a list with one element [Module], where Module is the callback module, if the child process is a supervisor, gen_server or gen_fsm. If the child process is an event manager (gen_event) with a dynamic set of callback modules, Modules should be dynamic. See OTP Design Principles for more information about release handling.

• Internally, the supervisor also keeps track of the pid Child of the child process, or undefined if no pid exists.

Types:

Creates a supervisor process as part of a supervision tree. The function will, among other things, ensure that the supervisor is linked to the calling process (its supervisor).

The created supervisor process calls Module:init/1 to find out about restart strategy, maximum restart frequency and child processes. To ensure a synchronized start-up procedure, start_link/2,3 does not return until Module:init/1 has returned and all child processes have been started.

If SupName={local,Name} the supervisor is registered locally as Name using register/2. If SupName={global,Name} the supervisor is registered globally as Name using global:register_name/2. If no name is provided, the supervisor is not registered.

Module is the name of the callback module.

Args is an arbitrary term which is passed as the argument to Module:init/1.

If the supervisor and its child processes are successfully created (i.e. if all child process start functions return {ok,Child}, {ok,Child,Info}, or ignore) the function returns {ok,Pid}, where Pid is the pid of the supervisor. If there already exists a process with the specified SupName the function returns {error,{already_started,Pid}}, where Pid is the pid of that process.

If Module:init/1 returns ignore, this function returns ignore as well and the supervisor terminates with reason normal. If Module:init/1 fails or returns an incorrect value, this function returns {error,Term} where Term is a term with information about the error, and the supervisor terminates with reason Term.

If any child process start function fails or returns an error tuple or an erroneous value, the function returns {error,shutdown} and the supervisor terminates all started child processes and then itself with reason shutdown.

Types:

Dynamically adds a child specification to the supervisor SupRef which starts the corresponding child process.

SupRef can be:

• the pid,
• Name, if the supervisor is locally registered,
• {Name,Node}, if the supervisor is locally registered at another node, or
• {global,Name}, if the supervisor is globally registered.

ChildSpec should be a valid child specification (unless the supervisor is a simple_one_for_one supervisor, see below). The child process will be started by using the start function as defined in the child specification.

If the case of a simple_one_for_one supervisor, the child specification defined in Module:init/1 will be used and ChildSpec should instead be an arbitrary list of terms List. The child process will then be started by appending List to the existing start function arguments, i.e. by calling apply(M, F, A++List) where {M,F,A} is the start function defined in the child specification.

If there already exists a child specification with the specified Id, ChildSpec is discarded and the function returns {error,already_present} or {error,{already_started,Child}}, depending on if the corresponding child process is running or not.

If the child process start function returns {ok,Child} or {ok,Child,Info}, the child specification and pid is added to the supervisor and the function returns the same value.

If the child process start function returns ignore, the child specification is added to the supervisor, the pid is set to undefined and the function returns {ok,undefined}.

If the child process start function returns an error tuple or an erroneous value, or if it fails, the child specification is discarded and the function returns {error,Error} where Error is a term containing information about the error and child specification.

Types:

Tells the supervisor SupRef to terminate the child process corresponding to the child specification identified by Id. The process, if there is one, is terminated but the child specification is kept by the supervisor. This means that the child process may be later be restarted by the supervisor. The child process can also be restarted explicitly by calling restart_child/2. Use delete_child/2 to remove the child specification.

See start_child/2 for a description of SupRef.

If successful, the function returns ok. If there is no child specification with the specified Id, the function returns {error,not_found}.

Types:

Tells the supervisor SupRef to delete the child specification identified by Id. The corresponding child process must not be running, use terminate_child/2 to terminate it.

See start_child/2 for a description of SupRef.

If successful, the function returns ok. If the child specification identified by Id exists but the corresponding child process is running, the function returns {error,running}. If the child specification identified by Id does not exist, the function returns {error,not_found}.

Types:

Tells the supervisor SupRef to restart a child process corresponding to the child specification identified by Id. The child specification must exist and the corresponding child process must not be running.

See start_child/2 for a description of SupRef.

If the child specification identified by Id does not exist, the function returns {error,not_found}. If the child specification exists but the corresponding process is already running, the function returns {error,running}.

If the child process start function returns {ok,Child} or {ok,Child,Info}, the pid is added to the supervisor and the function returns the same value.

If the child process start function returns ignore, the pid remains set to undefined and the function returns {ok,undefined}.

If the child process start function returns an error tuple or an erroneous value, or if it fails, the function returns {error,Error} where Error is a term containing information about the error.

Types:

Returns a newly created list with information about all child specifications and child processes belonging to the supervisor SupRef.

Note that calling this function when supervising a large number of children under low memory conditions can cause an out of memory exception.

See start_child/2 for a description of SupRef.

The information given for each child specification/process is:

• Id - as defined in the child specification or undefined in the case of a simple_one_for_one supervisor.

• Child - the pid of the corresponding child process, or undefined if there is no such process.

• Type - as defined in the child specification.

• Modules - as defined in the child specification.

Types:

Returns a property list (see proplists) containing the counts for each of the following elements of the supervisor's child specifications and managed processes:

• specs - the total count of children, dead or alive.

• active - the count of all actively running child processes managed by this supervisor.

• supervisors - the count of all children marked as child_type = supervisor in the spec list, whether or not the child process is still alive.

• workers - the count of all children marked as child_type = worker in the spec list, whether or not the child process is still alive.

Types:

This function takes a list of child specification as argument and returns ok if all of them are syntactically correct, or {error,Error} otherwise.

The following functions should be exported from a supervisor callback module.

Types:

Whenever a supervisor is started using supervisor:start_link/2,3, this function is called by the new process to find out about restart strategy, maximum restart frequency and child specifications.

Args is the Args argument provided to the start function.

RestartStrategy is the restart strategy and MaxR and MaxT defines the maximum restart frequency of the supervisor. [ChildSpec] is a list of valid child specifications defining which child processes the supervisor should start and monitor. See the discussion about Supervision Principles above.

Note that when the restart strategy is simple_one_for_one, the list of child specifications must be a list with one child specification only. (The Id is ignored). No child process is then started during the initialization phase, but all children are assumed to be started dynamically using supervisor:start_child/2.

The function may also return ignore.

gen_event(3), gen_fsm(3), gen_server(3), sys(3)