1 Inets Release Notes

1.1 Inets 5.2

Improvements and New Features

[ftpc] - Start of the FTP client has been changed in the following way:
- It is now also possible to start a standalone FTP client process using the re-introduced ftp:open function.
  
  This is an alternative to starting the client using the inets service framework.
  
  The old ftp:open/1, undocumented, function, caused the client to be hooken into the inets service supervision framework. This is no longer the case.
  
  *** POTENTIAL INCOMPATIBILITY ***
- Previously, the FTP client attempted to use IPv6, unless otherwise instructed (the ip_v6_disabled flag), and only used IPv4 if this did not work. This has now been changed.
  
  A new option, ipfamily, has been introduced, with the default value inet (IPv4).
  
  See ftp:open for more info.
  
  *** POTENTIAL INCOMPATIBILITY ***
Own Id: OTP-8258
The documentation is now built with open source tools (xsltproc and fop) that exists on most platforms. One visible change is that the frames are removed.

Own Id: OTP-8249

Fixed Bugs and Malfunctions

[httpc] - Streaming to file did not work.

dizzyd@gmail.com

Own Id: OTP-8204
[ftpc] - The ls/2 function (LIST command) and the nlist/2 function (NLST command) with wildcards did not work properly.

These functions is documented as working on directories, but this is actually not according the standard. The LIST and NLST commands are specified to operate on a directory or other group of files, or a file.

Previously, an attempt was made to check if the listing returned by the server was actually an error message. This was done by changing remote directory (cd) into the (assumed) "directory". This may work if Pathname was actually a directory, but as this is not always the case, this test does not work. Instead, we now return the actual server result and leave the interpretation to the caller.

*** POTENTIAL INCOMPATIBILITY ***

Own Id: OTP-8247

Aux Id: seq11407
[httpc] - Fixes various bugs in timeout and keep-alive queue handling.
- When a queued request times, out the error mssage is sent the owner of the active request.
- Requests in the keep-alive queue is forgotten when handler terminates.
- Timeout out requests are retried.
Jean-Sébastien Pédron

Own Id: OTP-8248
[httpd] - Unnecessarily strict matching when handling closing sockets.

Own Id: OTP-8280

1.2 Inets 5.1.3

Improvements and New Features

Fixed Bugs and Malfunctions

[httpc] - Raise condition. When http:request is called and httpc_manager selects a session where there's already a pending request, then the connection handler for that session effectively resets its parser, readying it for the response to the second request. But if there are still some inbound packets for the response to the first request, things get confused.

tomas.abrahamsson@gmail.com

Own Id: OTP-8154

1.3 Inets 5.1.2

Improvements and New Features

[httpc] - Added http option connect_timeout for http client request. The connect_timeout option is used for the initial request, when the client connects to the server. Default value is that of the timeout option.

See the request/4,5 function for more info.

Own Id: OTP-7298

Fixed Bugs and Malfunctions

[httpd] - Failed to create listen socket with invalid option combo. The http-server failed to create its listen socket when the bind-address was an IPv4-address (a tuple of size 4) and the ipfamily option was inet6fb4.

Own Id: OTP-8118

Aux Id: seq11321
[httpd] - Removed documentation for non-existing function (httpd_util:header/2,3,4).

Own Id: OTP-8101

1.4 Inets 5.1.1

Improvements and New Features

[httpd] - When starting inets (the web-server) and supplying a descriptor on the command line (example: erl -httpd_8888 <descriptor>) it is now possible to specify which ip-family to use: inet | inet6 | inet6fb4.

Example: erl -httpd_8888 10|inet6

When starting the web-server either using a file with property list (the proplist_file) or a an property list, using the ipfamily option: {ipfamily, inet | inet6 | inet6fb4}.

Finally, when starting the web-server using the classical apache-style config file, the BindAddress directive has been augmented to allow the specification of the IpFamily: BindAddress blirk.ericsson.se|inet

Default is inet6fb4 which emulates the behaviour of the previous version.

See the Communication properties section for more info.

Own Id: OTP-8069

Aux Id: seq11086

Fixed Bugs and Malfunctions

[httpc] - Reception of unexpected data causes handler crash.

Own Id: OTP-8052

1.5 Inets 5.1

Improvements and New Features

[httpc] Added support for web services using only basic auth, with a token as the user part and no password part.

twoggle@gmail.com

Own Id: OTP-7998
[httpc] - Bind HTTP client to IP-addr. It is now possible to specify an alternate ip-address and port to be used when the client connects to the server.

As a side-effect of this, the option ipv6 has been removed and replaced by the ipfamily option.

See http:set_options/1,2 for more info.

*** POTENTIAL INCOMPATIBILITY ***

Own Id: OTP-8004

Fixed Bugs and Malfunctions

Updated guard tests (i.e. is_list(L) instead of list(L) and possibly andalso/orelse instead of ","/";").

Own Id: OTP-7994
[httpc] - Remove use of the deprecated regexp module.

Own Id: OTP-8001
[httpc] - The option max_keep_alive_length was not handled properly.

Own Id: OTP-8005

1.6 Inets 5.0.14

Improvements and New Features

[tftp] The callback watchdog has been removed, as it turned out to be counter productive when the disk was overloaded. Earlier a connection was aborted when a callback (which performs the file access in the TFTP server) took too long time.

[tftp] The error message "Too many connections" has been reclassified to be a warning.

Own Id: OTP-7888

Fixed Bugs and Malfunctions

[httpc] - Incorrect http version option check.

Mats Cronqvist

Own Id: OTP-7882
[httpc] - Unnecessary error report when client terminating as a result of the server closed the socket unexpectedly.

Own Id: OTP-7883
[httpc] - Failed transforming a relative URI to an absolute URI.

mtalyans@cisco.com

Own Id: OTP-7950
[httpd] - The HTTP server did not handle the config option ssl_ca_certificate_file.

karol.skocik@gmail.com

Own Id: OTP-7976

1.7 Inets 5.0.13

Fixed Bugs and Malfunctions

Ssl did not work correctly with the use of new style configuration due to sn old internal format that was not changed correctly in all places.

Own Id: OTP-7723 Aux Id: seq11143
[httpc] - Now streams 200 and 206 results and not only 200 results.

Own Id: OTP-7857

Improvements and New Features

[httpc] - The inets http client will now use persistent connections without pipelining as default and if a pipeline timeout is set it will pipeline the requests on the persistent connections.

*** POTENTIAL INCOMPATIBILITY ***

Own Id: OTP-7463
[httpd] - added option ssl_password_callback_arguments.

Own Id: OTP-7724 Aux Id: seq11151
Changed the socket use so that it will become more robust to non-functional ipv6 and fallback on ipv4. This changes may for very special os-configurations cause a problem when used with erts-versions pre R13.

Own Id: OTP-7726
Removed deprecated function httpd_util:key1search/[2,3]

Own Id: OTP-7815

1.8 Inets 5.0.12

Improvements and New Features

[httpd] - Updated inets so that it not uses the deprecated function ssl:accept/[2,3].

Own Id: OTP-7636 Aux Id: seq11086

1.9 Inets 5.0.11

Fixed Bugs and Malfunctions

Transient bug related to hot code swap of the TFTP server is now fixed. It could happen that the first TFTP server that was started after a code upgrade to Inets-5.0.6 crashed with a function clause error in tftp_engine:service_init/2.

Own Id: OTP-7574 Aux Id: seq11069
[httpd] - Validation of ssl_password_callback_module was incorrect.

Own Id: OTP-7597 Aux Id: seq11074
[httpd] - Misspelling in old apachelike configuration directive TransferDiskLogSize has been corrected.

Own Id: OTP-7598 Aux Id: seq11059
Minor problems found by dialyzer has been fixed.

Own Id: OTP-7605

1.10 Inets 5.0.10

Fixed Bugs and Malfunctions

Enhanched an info report.

Own Id: OTP-7450

Improvements and New Features

Changed errro message from {wrong_type,{document_root,"/tmp/htdocs"}} to {invalid_option,{non_existing, document_root,"/tmp/htdocs"}}.

Own Id: OTP-7454
Relative paths in directory authentication did not work as intended, this has now been fixed.

Own Id: OTP-7490
The query-string passed to the callback function was not compliant with the documentation, it is now.

Own Id: OTP-7512

1.11 Inets 5.0.9

Fixed Bugs and Malfunctions

Parameters to error_logger:error_report/1 has been corrected.

Own Id: OTP-7257 Aux Id: OTP-7294, OTP-7258
[httpd] - If a Module/Function request matching an erl_script_alias registration does not exist as a function in the module registered a 404 error will now be issued instead of a 500 error.

Own Id: OTP-7323
[httpd] -The option auth_type for mod_auth is no longer mandatory, for backward-compatibility reasons.

Own Id: OTP-7341

1.12 Inets 5.0.8

Fixed Bugs and Malfunctions

[httpd] - Spelling error caused client connection header to be ignored.

Own Id: OTP-7315 Aux Id: seq10951
[httpd] - Call to the function mod_get:get_modification_date/1 was made too early resulting in that httpd did not send the 404 file missing response.

Own Id: OTP-7321

1.13 Inets 5.0.7

Improvements and New Features

[httpc, httpd] - Now follows the recommendation regarding line terminators in section 19.3 in RFC 2616 e.i: "The line terminator for message-header fields is the sequence CRLF. However, we recommend that applications, when parsing such headers, recognize a single LF as a line terminator and ignore the leading CR".

Own Id: OTP-7304 Aux Id: seq10944

1.14 Inets 5.0.6

Improvements and New Features

[tftp] If a callback (which performs the file access in the TFTP server) takes too long time (more than the double TFTP timeout), the server will abort the connection and send an error reply to the client. This implies that the server will release resources attached to the connection faster than before. The server simply assumes that the client has given up.

[tftp] If the TFTP server receives yet another request from the same client (same host and port) while it already has an active connection to the client, it will simply ignore the new request if the request is equal with the first one (same filename and options). This implies that the (new) client will be served by the already ongoing connection on the server side. By not setting up yet another connection, in parallel with the ongoing one, the server will consumer lesser resources.

[tftp] netascii mode is now supported when the client/server has native ascii support (Windows). The new optional parameter native_ascii in the tftp_binary and tftp_file callback modules can be used to override the default behavior.

[tftp] Yet another callback module has been added in order to allow customized handling of error, warning and info messages. See the new configuration parameter, logger.

[tftp] Yet another configuration parameter, max_retries, has been added in order to control the number of times a packet can be resent. The default is 5.

[tftp] tftp:info/1 and tftp:change_config/2 can now be applied to all daemons or all servers in one command without bothering about their process identifiers.

External TR HI89527.

Own Id: OTP-7266

1.15 Inets 5.0.5

Improvements and New Features

[tftp] Blocks with too low block numbers are silently discarded. For example if a server receives block #5 when it expects block #7 it will discard the block without interrupting the file transfer. Too high block numbers does still imply an error. External TR HI96072.

Own Id: OTP-7220
[tftp] The problem with occasional case_clause errors in tftp_engine:common_read/7 has been fixed. External TR HI97362.

Own Id: OTP-7221

1.16 Inets 5.0.4

Improvements and New Features

Changed calls to file open to concur with the API and not use deprecated syntax.

Own Id: OTP-7172
[tftp] Server lost the first packet when the client timed out

Own Id: OTP-7173

1.17 Inets 5.0.3

Improvements and New Features

Updated copyright headers and fixed backwards compatibility for an undocumented feature, for now. This feature will later be removed and a new and documented option will take its place.

Own Id: OTP-7144

1.18 Inets 5.0.2

Improvements and New Features

[httpd] - Error logs now has a pretty and a compact format and access logs can be written on the common log format or the extended common log format.

Own Id: OTP-6661 Aux Id: Seq 7764
[httpc] - Added acceptance of missing reason phrase to the relaxed mode.

Own Id: OTP-7024
[httpc] - A new option has been added to enable the client to act as lower version clients, by default the client is an HTTP/1.1 client.

Own Id: OTP-7043

1.19 Inets 5.0.1

Fixed Bugs and Malfunctions

[httpd] - Deprecated function httpd:start/1 did not accept all inputs that it had done previously. This should now work again.

Own Id: OTP-7040

Improvements and New Features

[httpd] - Changed validity check on bind_address so that it uses inet:getaddr instead of inet:gethostbyaddr as the former puts a too hard restriction on the bind_address.

Own Id: OTP-7041 Aux Id: seq10829
[httpc] - Internal process now does try-catch and terminates normally in case of HTTP parse errors. Semantical the client works just as before returning an error message to the client, even if the error massage has been enhanced, but there is no supervisor report in the shell of a internal process crashing. (Which was the expected behavior and not a fault.)

Own Id: OTP-7042

1.20 Inets 5.0

Improvements and New Features

[httpd, httpc] - Deprecated base64 decode/encode functions have been removed. Inets uses base64 in STDLIB instead.

*** POTENTIAL INCOMPATIBILITY ***

Own Id: OTP-6485
[httpd] - It is now possible to restrict the length of acceptable URI:s in the HTTP server.

Own Id: OTP-6572
[httpc] - Profiles are now supported i.e. the options available in set_options/1 can be set locally for a certain profile and do not have to affect all HTTP-requests issued in the Erlang node. Calls to the HTTP client API functions not using the profile argument will use the default profile.

Own Id: OTP-6690
A new uniform Inets interface provides a flexible way to start/stop Inets services and get information about running services. See inets(3). This also means that inflexibilities in the HTTP server has been removed and more default values has been added.

Own Id: OTP-6705
[tftp] Logged errors have been changed to be logged warnings.

Own Id: OTP-6916 Aux Id: seq10737
[httpc] - The client will now return the proper value when receiving a HTTP 204 code instead of hanging.

Own Id: OTP-6982
The Inets application now has to be explicitly started and stopped i.e. it will not automatically be started as a temporary application as it did before. Although a practical feature when testing things in the shell it is not desirable that people take advantage of this and not start the Inets application in a correct way in their products. Added functions to the Inets API that call application:start/stop.

*** POTENTIAL INCOMPATIBILITY ***

Own Id: OTP-6993