Common Test

Reference Manual

Version 1.19

Table of Contents

ct_netconfc

Module

ct_netconfc

Module Summary

NETCONF client module.

Since

Module ct_netconfc was introduced in OTP R15B02.

Description

NETCONF client module compliant with RFC 6241, NETCONF Configuration Protocol, and RFC 6242, Using the NETCONF Configuration Protocol over Secure SHell (SSH), and with support for RFC 5277, NETCONF Event Notifications.

Connecting to a NETCONF server

Call connect/1,2 to establish a connection to a server, then pass the returned handle to session/1-3 to establish a NETCONF session on a new SSH channel. Each call to session/1-3 establishes a new session on the same connection, and results in a hello message to the server.

Alternately, open/1,2 can be used to establish a single session on a dedicated connection. (Or, equivalently, only_open/1,2 followed by hello/1-3.)

Connect/session options can be specified in a configuration file with entries like the following.

 {server_id(), [option()]}.

The server_id() or an associated ct:target_name() can then be passed to the aforementioned functions to use the referenced configuration.

Signaling

Protocol operations in the NETCONF protocol are realized as remote procedure calls (RPCs) from client to server and a corresponding reply from server to client. RPCs are sent using like-named functions (eg. edit_config/3-5 to send an edit-config RPC), with the server reply as return value. There are functions for each RPC defined in RFC 6241 and the create-subscription RPC from RFC 5277, all of which are wrappers on send_rpc/2,3, that can be used to send an arbitrary RPC not defined in RFC 6241 or RFC 5277.

All of the signaling functions have one variant with a Timeout argument and one without, corresponding to an infinite timeout. The latter is inappropriate in most cases since a non-response by the server or a missing message-id causes the call to hang indefinitely.

Logging

The NETCONF server uses error_logger for logging of NETCONF traffic. A special purpose error handler is implemented in ct_conn_log_h. To use this error handler, add the cth_conn_log hook in the test suite, for example:

 suite() ->
    [{ct_hooks, [{cth_conn_log, [{ct:conn_log_mod(), ct:conn_log_options()}]}]}].

conn_log_mod() is the name of the Common Test module implementing the connection protocol, for example, ct_netconfc.

Hook option log_type specifies the type of logging:

raw

The sent and received NETCONF data is logged to a separate text file "as is" without any formatting. A link to the file is added to the test case HTML log.

pretty

The sent and received NETCONF data is logged to a separate text file with XML data nicely indented. A link to the file is added to the test case HTML log.

html (default)

The sent and received NETCONF traffic is pretty printed directly in the test case HTML log.

silent

NETCONF traffic is not logged.

By default, all NETCONF traffic is logged in one single log file. However, different connections can be logged in separate files. To do this, use hook option hosts and list the names of the servers/connections to be used in the suite. The connections must be named for this to work, that is, they must be opened with open/2.

Option hosts has no effect if log_type is set to html or silent.

The hook options can also be specified in a configuration file with configuration variable ct_conn_log:

For example:

 {ct_conn_log,[{ct_netconfc,[{log_type,pretty},
                             {hosts,[ct:key_or_name()]}]}]}
Note

Hook options specified in a configuration file overwrite the hard-coded hook options in the test suite.

Logging Example 1:

The following ct_hooks statement causes pretty printing of NETCONF traffic to separate logs for the connections named nc_server1 and nc_server2. Any other connections are logged to default NETCONF log.

 suite() ->
    [{ct_hooks, [{cth_conn_log, [{ct_netconfc,[{log_type,pretty}},
                                               {hosts,[nc_server1,nc_server2]}]}
                                ]}]}].

Connections must be opened as follows:

 open(nc_server1,[...]),
 open(nc_server2,[...]).

Logging Example 2:

The following configuration file causes raw logging of all NETCONF traffic in to one single text file:

 {ct_conn_log,[{ct_netconfc,[{log_type,raw}]}]}.

The ct_hooks statement must look as follows:

 suite() ->
    [{ct_hooks, [{cth_conn_log, []}]}].

The same ct_hooks statement without the configuration file would cause HTML logging of all NETCONF connections in to the test case HTML log.

Data Types

Handle to a NETCONF session, as required by signaling functions.

Handle to a connection to a NETCONF server as returned by connect/1,2, or to a session as returned by session/1-3, open/1,2, or only_open/1,2.

xs_datetime() = string()

Date and time of a startTime/stopTime element in an RFC 5277 create-subscription request. Of XML primitive type dateTime, which has the (informal) form

 [-]YYYY-MM-DDThh:mm:ss[.s][Z|(+|-)hh:mm]

where T and Z are literal and .s is one or more fractional seconds.

Event notification messages sent as a result of calls to create_subscription/2,3.

option() =
    {host | ssh, host()} |
    {port, inet:port_number()} |
    {timeout, timeout()} |
    {capability, string() | [string()]} |
    ssh:client_option()

Options host and port specify the server endpoint to which to connect, and are passed directly to ssh:connect/4, as are arbitrary ssh options. Common options are user, password and user_dir.

Option timeout specifies the number of milliseconds to allow for connection establishment and, if the function in question results in an outgoing hello message, reception of the server hello. The timeout applies to connection and hello independently; one timeout for connection establishment, another for hello reception.

Option capability specifies the content of a corresponding element in an outgoing hello message, each option specifying the content of a single element. If no base NETCONF capability is configured then the RFC 4741 1.0 capability, "urn:ietf:params:netconf:base:1.0", is added, otherwise not. In particular, the RFC 6241 1.1 capability must be explicitly configured. NETCONF capabilities can be specified using the shorthand notation defined in RFC 6241, any capability string starting with a colon being prefixed by either "urn:ietf:params:netconf" or "urn:ietf:params:netconf:capability", as appropriate.

Capability options are ignored by connect/1-3 and only_open/1-2, which don't result in an outgoing hello message.

server_id() = atom()

Identity of connection or session configuration in a configuration file.

stream_data() =
    {description, string()} |
    {replaySupport, string()} |
    {replayLogCreationTime, string()} |
    {replayLogAgedTime, string()}

stream_name() = string()

Stream information as returned by get_event_streams/1-3. See RFC 5277, "XML Schema for Event Notifications", for detail on the format of the string values.

xml_content() = [simple_xml() | iolist()]
xml_tag() = atom()

Representation of XML, as described in application xmerl.

xpath() = {xpath, string()}
error_reason() = term()
netconf_db() = running | startup | candidate

Exports

action(Client, Action) -> Result
OTP R15B02
action(Client, Action, Timeout) -> Result
OTP R15B02

Types

Client = client()
Action = simple_xml()
Timeout = timeout()
Result = ok | {ok, [simple_xml()]} | {error, error_reason()}

Executes an action. If the return type is void, ok is returned instead of {ok,[simple_xml()]}.

close_session(Client) -> Result
OTP R15B02
close_session(Client, Timeout) -> Result
OTP R15B02

Types

Client = client()
Timeout = timeout()
Result = ok | {error, error_reason()}

Requests graceful termination of the session associated with the client.

When a NETCONF server receives a close-session request, it gracefully closes the session. The server releases any locks and resources associated with the session and gracefully closes any associated connections. Any NETCONF requests received after a close-session request are ignored.

connect(Options) -> Result
OTP 20.0

Types

Options = [option()]
Result = {ok, handle()} | {error, error_reason()}

Opens an SSH connection to a NETCONF server.

If the server options are specified in a configuration file, use connect/2 instead.

The opaque handle() reference returned from this function is required as connection identifier when opening sessions over this connection, see session/1-3.

connect(KeyOrName, ExtraOptions) -> Result
OTP 20.0

Types

KeyOrName = ct:key_or_name()
ExtraOptions = [option()]
Result = {ok, handle()} | {error, error_reason()}

Open an SSH connection to a named NETCONF server.

If KeyOrName is a configured server_id() or a target_name() associated with such an Id, then the options for this server are fetched from the configuration file.

The options list is added to those of the configuration file. If an option is specified in both lists, the configuration file takes precedence.

If the server is not specified in a configuration file, use connect/1 instead.

The opaque handle() reference returned from this function can be used as connection identifier when opening sessions over this connection, see session/1-3. However, if KeyOrName is a target_name(), that is, if the server is named through a call to ct:require/2 or a require statement in the test suite, then this name can be used instead of handle().

copy_config(Client, Target, Source) -> Result
OTP R15B02
copy_config(Client, Target, Source, Timeout) -> Result
OTP R15B02

Types

Client = client()
Target = Source = netconf_db()
Timeout = timeout()
Result = ok | {error, error_reason()}

Copies configuration data.

Which source and target options that can be issued depends on the capabilities supported by the server. That is, :candidate and/or :startup are required.

create_subscription(Client, Values) -> Result
OTP 22.1
create_subscription(Client, Values, Timeout) -> Result
OTP 22.1

Types

Client = client()
Values =
    #{stream => Stream,
      filter => Filter,
      start => StartTime,
      stop => StopTime}
Stream = stream_name()
StartTime = StopTime = xs_datetime()
Timeout = timeout()
Result = ok | {error, error_reason()}

Creates a subscription for event notifications by sending an RFC 5277 create-subscription RPC to the server. The calling process receives events as messages of type notification().

From RFC 5722, 2.1 Subscribing to Receive Event Notifications:

Stream

Indicates which stream of event is of interest. If not present, events in the default NETCONF stream are sent.

Filter

Indicates which subset of all possible events is of interest. The parameter format is the same as that of the filter parameter in the NETCONF protocol operations. If not present, all events not precluded by other parameters are sent.

StartTime

Used to trigger the replay feature and indicate that the replay is to start at the time specified. If StartTime is not present, this is not a replay subscription. It is not valid to specify start times that are later than the current time. If StartTime is specified earlier than the log can support, the replay begins with the earliest available notification. This parameter is of type dateTime and compliant to RFC 3339. Implementations must support time zones.

StopTime

Used with the optional replay feature to indicate the newest notifications of interest. If StopTime is not present, the notifications continues until the subscription is terminated. Must be used with and be later than StartTime. Values of StopTime in the future are valid. This parameter is of type dateTime and compliant to RFC 3339. Implementations must support time zones.

See RFC 5277 for more details. The requirement that StopTime must only be used with StartTime is not enforced, to allow an invalid request to be sent to the server.

Prior to OTP 22.1, this function was documented as having 15 variants in 6 arities. These are still exported for backwards compatibility, but no longer documented. The map-based variants documented above provide the same functionality with simpler arguments.

delete_config(Client, Target) -> Result
OTP R15B02
delete_config(Client, Target, Timeout) -> Result
OTP R15B02

Types

Client = client()
Target = startup | candidate
Timeout = timeout()
Result = ok | {error, error_reason()}

Deletes configuration data.

The running configuration cannot be deleted and :candidate or :startup must be advertised by the server.

disconnect(Conn) -> ok | {error, error_reason()}
OTP 20.0

Types

Conn = handle()

Closes the given SSH connection.

If there are open NETCONF sessions on the connection, these will be brutally aborted. To avoid this, close each session with close_session/1,2

edit_config(Client, Target, Config) -> Result
OTP R15B02
edit_config(Client, Target, Config, OptParams) -> Result
OTP 18.0
edit_config(Client, Target, Config, Timeout) -> Result
OTP R15B02
edit_config(Client, Target, Config, OptParams, Timeout) -> Result
OTP 18.0

Types

Client = client()
Target = netconf_db()
OptParams = [simple_xml()]
Timeout = timeout()
Result = ok | {error, error_reason()}

Edits configuration data.

By default only the running target is available, unless the server includes :candidate or :startup in its list of capabilities.

OptParams can be used for specifying optional parameters (default-operation, test-option, or error-option) to be added to the edit-config request. The value must be a list containing valid simple XML, for example:

 [{'default-operation', ["none"]},
  {'error-option', ["rollback-on-error"]}]

If OptParams is not given, the default value [] is used.

get(Client, Filter) -> Result
OTP R15B02
get(Client, Filter, Timeout) -> Result
OTP R15B02

Types

Client = client()
Timeout = timeout()
Result = {ok, [simple_xml()]} | {error, error_reason()}

Gets data.

This operation returns both configuration and state data from the server.

Filter type xpath can be used only if the server supports :xpath.

get_capabilities(Client) -> Result
OTP R15B02
get_capabilities(Client, Timeout) -> Result
OTP R15B02

Types

Client = client()
Timeout = timeout()
Result = [string()] | {error, error_reason()}

Returns the server capabilities as received in its hello message.

get_config(Client, Source, Filter) -> Result
OTP R15B02
get_config(Client, Source, Filter, Timeout) -> Result
OTP R15B02

Types

Client = client()
Source = netconf_db()
Timeout = timeout()
Result = {ok, [simple_xml()]} | {error, error_reason()}

Gets configuration data.

To be able to access another source than running, the server must advertise :candidate and/or :startup.

Filter type xpath can be used only if the server supports :xpath.

get_event_streams(Client) -> Result
OTP 20.0
get_event_streams(Client, Timeout) -> Result
OTP R15B02
get_event_streams(Client, Streams) -> Result
OTP 20.0
get_event_streams(Client, Streams, Timeout) -> Result
OTP R15B02

Types

Client = client()
Streams = [stream_name()]
Timeout = timeout()
Result = {ok, streams()} | {error, error_reason()}

Sends a request to get the specified event streams.

Streams is a list of stream names. The following filter is sent to the NETCONF server in a get request:

 <netconf xmlns="urn:ietf:params:xml:ns:netmod:notification">
   <streams>
     <stream>
       <name>StreamName1</name>
     </stream>
     <stream>
       <name>StreamName2</name>
     </stream>
     ...
   </streams>
 </netconf>

If Streams is an empty list, all streams are requested by sending the following filter:

 <netconf xmlns="urn:ietf:params:xml:ns:netmod:notification">
   <streams/>
 </netconf>

If more complex filtering is needed, use ct_netconfc:get/2,3 and specify the exact filter according to "XML Schema for Event Notifications" in RFC 5277.

get_session_id(Client) -> Result
OTP R15B02
get_session_id(Client, Timeout) -> Result
OTP R15B02

Types

Client = client()
Timeout = timeout()
Result = integer() >= 1 | {error, error_reason()}

Returns the session Id associated with the specified client.

hello(Client) -> Result
OTP R15B02
hello(Client, Timeout) -> Result
OTP R15B02
hello(Client, Options, Timeout) -> Result
OTP 17.5.3

Types

Client = handle()
Options = [{capability, [string()]}]
Timeout = timeout()
Result = ok | {error, error_reason()}

Exchanges hello messages with the server. Returns when the server hello has been received or after the specified timeout.

Note that capabilities for an outgoing hello can be passed directly to open/2.

kill_session(Client, SessionId) -> Result
OTP R15B02
kill_session(Client, SessionId, Timeout) -> Result
OTP R15B02

Types

Client = client()
SessionId = integer() >= 1
Timeout = timeout()
Result = ok | {error, error_reason()}

Forces termination of the session associated with the supplied session Id.

The server side must abort any ongoing operations, release any locks and resources associated with the session, and close any associated connections.

Only if the server is in the confirmed commit phase, the configuration is restored to its state before entering the confirmed commit phase. Otherwise, no configuration rollback is performed.

If the specified SessionId is equal to the current session Id, an error is returned.

lock(Client, Target) -> Result
OTP R15B02
lock(Client, Target, Timeout) -> Result
OTP R15B02

Types

Client = client()
Target = netconf_db()
Timeout = timeout()
Result = ok | {error, error_reason()}

Locks the configuration target.

Which target parameters that can be used depends on if :candidate and/or :startup are supported by the server. If successfull, the configuration system of the device is unavailable to other clients (NETCONF, CORBA, SNMP, and so on). Locks are intended to be short-lived.

Operation kill_session/2,3 can be used to force the release of a lock owned by another NETCONF session. How this is achieved by the server side is implementation-specific.

only_open(Options) -> Result
OTP R15B02

Types

Options = [option()]
Result = {ok, handle()} | {error, error_reason()}

Opens a NETCONF session, but does not send hello.

As open/1, but does not send a hello message.

only_open(KeyOrName, ExtraOptions) -> Result
OTP R15B02

Types

KeyOrName = ct:key_or_name()
ExtraOptions = [option()]
Result = {ok, handle()} | {error, error_reason()}

Opens a named NETCONF session, but does not send hello.

As open/2, but does not send a hello message.

open(Options) -> Result
OTP R15B02

Types

Options = [option()]
Result = {ok, handle()} | {error, error_reason()}

Opens a NETCONF session and exchanges hello messages.

If the server options are specified in a configuration file, or if a named client is needed for logging purposes (see section Logging in this module), use open/2 instead.

The opaque handle() reference returned from this function is required as client identifier when calling any other function in this module.

open(KeyOrName, ExtraOption) -> Result
OTP R15B02

Types

KeyOrName = ct:key_or_name()
ExtraOption = [option()]
Result = {ok, handle()} | {error, error_reason()}

Opens a named NETCONF session and exchanges hello messages.

If KeyOrName is a configured server_id() or a target_name() associated with such an Id, then the options for this server are fetched from the configuration file.

The options list is added to those of the configuration file. If an option is specified in both lists, the configuration file take precedence.

If the server is not specified in a configuration file, use open/1 instead.

The opaque handle() reference returned from this function can be used as client identifier when calling any other function in this module. However, if KeyOrName is a target_name(), that is, if the server is named through a call to ct:require/2 or a require statement in the test suite, then this name can be used instead of handle().

See also ct:require/2.

send(Client, SimpleXml) -> Result
OTP R16B02
send(Client, SimpleXml, Timeout) -> Result
OTP R16B02

Types

Client = client()
SimpleXml = simple_xml()
Timeout = timeout()
Result = simple_xml() | {error, error_reason()}

Sends an XML document to the server.

The specified XML document is sent "as is" to the server. This function can be used for sending XML documents that cannot be expressed by other interface functions in this module.

send_rpc(Client, SimpleXml) -> Result
OTP R16B02
send_rpc(Client, SimpleXml, Timeout) -> Result
OTP R16B02

Types

Client = client()
SimpleXml = simple_xml()
Timeout = timeout()
Result = [simple_xml()] | {error, error_reason()}

Sends a NETCONF rpc request to the server.

The specified XML document is wrapped in a valid NETCONF rpc request and sent to the server. The message-id and namespace attributes are added to element rpc.

This function can be used for sending rpc requests that cannot be expressed by other interface functions in this module.

session(Conn) -> Result
OTP 20.0
session(Conn, Options) -> Result
OTP 20.0
session(KeyOrName, Conn) -> Result
OTP 20.0
session(KeyOrName, Conn, Options) -> Result
OTP 20.0

Types

Conn = handle()
Options = [session_option()]
KeyOrName = ct:key_or_name()
Result = {ok, handle()} | {error, error_reason()}
session_option() =
    {timeout, timeout()} | {capability, string() | [string()]}

Opens a NETCONF session as a channel on the given SSH connection, and exchanges hello messages with the server.

The opaque handle() reference returned from this function can be used as client identifier when calling any other function in this module. However, if KeyOrName is used and it is a target_name(), that is, if the server is named through a call to ct:require/2 or a require statement in the test suite, then this name can be used instead of handle().

unlock(Client, Target) -> Result
OTP R15B02
unlock(Client, Target, Timeout) -> Result
OTP R15B02

Types

Client = client()
Target = netconf_db()
Timeout = timeout()
Result = ok | {error, error_reason()}

Unlocks the configuration target.

If the client earlier has acquired a lock through lock/2,3, this operation releases the associated lock. To access another target than running, the server must support :candidate and/or :startup.