snmp

snmp

The SNMP Application

This chapter describes the snmp application in OTP. The SNMP application provides the following services:

• a multilingual extensible SNMP agent
  
• a SNMP manager
  
• a MIB compiler
  

The following configuration parameters are defined for the SNMP application. Refer to application(3) for more information about configuration parameters.

A minimal config file for starting a node with both a manager and an agent:

      [{snmp, 
        [{agent, [{db_dir, "/tmp/snmp/agent/db"},
                  {config, [{dir, "/tmp/snmp/agent/conf"}]}]},
         {manager, [{config, [{dir, "/tmp/snmp/manager/conf"},
                              {db_dir, "/tmp/snmp/manager/db"}]}]}]}
        ]
       }
      ].
    

agent = [agent_opt()]

agent_opt() = {agent_type, agent_type()} | {agent_verbosity, verbosity()} | {versions, versions()} | {priority, priority()} | {multi_threaded, multi_threaded()} | {db_dir, db_dir()} | {local_db, local_db()} | {net_if, net_if()} | {mibs, mibs()} | {mib_storage, mib_storage()} | {mib_server, mib_server()} | {audit_trail_log, audit_trail_log()} | {error_report_mod, error_report_mod()} | {note_store, note_store()} | {symbolic_store, symbolic_store()} | {config, agent_config()}
The SNMP agent specific options.

manager = [manager_opt()]

manager_opt() = {net_if, manager_net_if()} | {server, server()} | {note_store, note_store()} | {config, manager_config()} | {mibs, manager_mibs()} | {priority, priority()} | {audit_trail_log, audit_trail_log()} | {versions, versions() | {def_user_module, def_user_module() | {def_user_data, def_user_data()}
The SNMP manager specific options.

Agent specific config options and types:

agent_type() = master | sub <optional>

If master, one master agent is started. Otherwise, no agents are started.
Default is master.

multi_threaded() = bool() <optional>

If true, the agent is multi-threaded, with one thread for each get request.
Default is false.

db_dir() = string() <mandatory>

Defines where the SNMP agent internal db files are stored.

local_db() = [local_db_opt()] <optional>

local_db_opt() = {repair, agent_repair()} | {auto_save, agent_auto_save()} | {verbosity, verbosity()}
Defines options specific for the SNMP agent local database.
For defaults see the options in local_db_opt().

agent_repair() = false | true | force <optional>

When starting snmpa_local_db it always tries to open an existing database. If false, and some errors occur, a new database is created instead. If true, an existing file will be repaired. If force, the table will be repaired even if it was properly closed.
Default is true.

agent_auto_save() = integer() | infinity <optional>

The auto save interval. The table is fluched to disk whenever not accessed for this amount of time.
Default is 5000.

agent_net_if() = [agent_net_if_opt()] <optional>

agent_net_if_opt() = {module, agent_net_if_module()} | {verbosity, verbosity()} | {options, agent_net_if_options()}
Defines options specific for the SNMP agent network interface entity.
For defaults see the options in agent_net_if_opt().

agent_net_if_module() = atom() <optional>

Module which handles the network interface part for the SNMP agent. Must implement the snmpa_network_interface behaviour.
Default is snmpa_net_if.

agent_net_if_options() = [agent_net_if_option()] <optional>

agent_net_if_option() = {bind_to, bind_to()} | {recbuf, recbuf()} | {no_reuse, no_reuse()} | {req_limit, req_limit()}
These options are actually specific to the used module. The ones shown here are applicable to the default agent_net_if_module().
For defaults see the options in agent_net_if_option().

req_limit() = integer() | infinity <optional>

Max number of simultanious requests handled by the agent.
Default is infinity.

agent_mibs() = [string()] <optional>

Specifies a list of MIBs (including path) that defines which MIBs are initially loaded into the SNMP master agent.
Note that the following mibs will allways be loaded:

• version v1: STANDARD-MIB
• version v2: SNMPv2
• version v3: SNMPv2, SNMP-FRAMEWORK-MIB and SNMP-MPD-MIB

Default is [].

mib_storage() = ets | {dets,Dir} | {dets,Dir,Action} | {mnesia,Nodes} | {mnesia,Nodes,Action} <optional>

Specifies how info retrieved from the mibs will be stored.
Default is ets.
Dir = string(). Dir is the directory where the (dets) files will be created.
Nodes = [node()]. If Nodes = [] then the own node is assumed.
Action = clear | keep. Default is keep. Action is used to specify what shall be done if the mnesia table already exist.

mib_server() = [mib_server_opt()] <optional>

mib_server_opt() = {mibentry_override, mibentry_override()} | {trapentry_override, trapentry_override()} | {verbosity, verbosity()}
Defines options specific for the SNMP agent mib server.
For defaults see the options in mib_server_opt().

mibentry_override() = bool() <optional>

If this value is false, then when loading a mib each mib- entry is checked prior to installation of the mib. The perpose of the check is to prevent that the same symbolic mibentry name is used for different oid's.
Default is false.

trapentry_override() = bool() <optional>

If this value is false, then when loading a mib each trap is checked prior to installation of the mib. The perpose of the check is to prevent that the same symbolic trap name is used for different trap's.
Default is false.

error_report_mod() = atom() <optional>

Defines an error report module, implementing the snmpa_error_report behaviour. Two modules are provided with the toolkit: snmpa_error_logger and snmpa_error_io.
Default is snmpa_error_logger.

symbolic_store() = [symbolic_store_opt()]

symbolic_store_opt() = {verbosity, verbosity()}
Defines options specific for the SNMP agent symbolic store.
For defaults see the options in symbolic_store_opt().

agent_config() = [agent_config_opt()] <mandatory>

agent_config_opt() = {dir, agent_config_dir()} | {force_load, force_load()} | {verbosity, verbosity()}
Defines specific config related options for the SNMP agent.
For defaults see the options in agent_config_opt().

agent_config_dir = dir() <mandatory>

Defines where the SNMP agent configuration files are stored.

force_load() = bool() <optional>

If true the configuration files are re-read during startup, and the contents of the configuration database ignored. Thus, if true, changes to the configuration database are lost upon reboot of the agent.
Default is false.

Manager specific config options and types:

server() = [server_opt()] <optional>

server_opt() = {timeout, server_timeout()} | {verbosity, verbosity()}
Specifies the options for the manager server process.
Default is silence.

server_timeout() = integer() <optional>

Asynchroneous request cleanup time. For every requests, some info is stored internally, in order to be able to deliver the reply (when it arrives) to the proper destination. If the reply arrives, this info will be deleted. But if there is no relpy (in time), the info has to be deleted after the best before time has been passed. This cleanup will be performed at regular intervals, defined by the server_timeout() time. The information will have an best before time, defined by the Expire time given when calling the request function (see ag, agn and as).
Time in milli-seconds.
Default is 30000.

manager_config() = [manager_config_opt()] <mandatory>

manager_config_opt() = {dir, manager_config_dir()} | {db_dir, manager_db_dir()} | {repair, manager_repair()} | {verbosity, verbosity()}
Defines specific config related options for the SNMP manager.
For defaults see the options in manager_config_opt().

manager_config_dir = dir() <mandatory>

Defines where the SNMP manager configuration files are stored.

manager_db_dir = dir() <mandatory>

Defines where the SNMP manager store persistent data.

manager_repair() = false | true | force <optional>

Defines the repair option for the persistent database (if and how the table is repaired when opened).
Default is true.

manager_auto_save() = integer() | infinity <optional>

The auto save interval. The table is fluched to disk whenever not accessed for this amount of time.
Default is 5000.

manager_mibs() = [string()] <optional>

Specifies a list of MIBs (including path) and defines which MIBs are initially loaded into the SNMP manager.
Default is [].

manager_net_if() = [manager_net_if_opt()] <optional>

manager_net_if_opt() = {module, manager_net_if_module()} | {verbosity, verbosity()} | {options, manager_net_if_options()}
Defines options specific for the SNMP manager network interface entity.
For defaults see the options in manager_net_if_opt().

manager_net_if_options() = [manager_net_if_option()] <optional>

manager_net_if_option() = {recbuf, recbuf()} | {bind_to, bind_to()} | {no_reuse, no_reuse()}
These options are actually specific to the used module. The ones shown here are applicable to the default manager_net_if_module().
For defaults see the options in manager_net_if_option().

manager_net_if_module() = atom() <optional>

Module which handles the network interface part for the SNMP manager. Must implement the snmpm_network_interface behaviour.
Default is snmpm_net_if.

def_user_module() = atom() <optional>

The module implementing the default user. See the snmpm_user behaviour.
Default is snmpm_user_default.

def_user_data() = term() <optional>

Data for the default user. Passed to the user module when calling the callback functions.
Default is undefined.

Common config types:

priority() = atom() <optional>

Defines the Erlang priority for all SNMP processes.
Default is normal.

versions() = [version()] <optional>

version() = v1 | v2 | v3
Which SNMP versions shall be accepted/used.
Default is [v1,v2,v3].

verbosity() = silence | info | log | debug | trace <optional>

Verbosity for a SNMP process. This specifies now much debug info is printed.
Default is silence.

bind_to() = bool() <optional>

If true, net_if binds to the IP adress. If false, net_if listens on any IP address on the host where it is running.
Default is false.

no_reuse() = bool() <optional>

If true, net_if does not specify that the IP and port address should be reusable. If false, the address is set to reusable.
Default is false.

recbuf() = integer() <optional>

Receive buffer size.
Default value is defined by gen_udp.

note_store() = [note_store_opt()] <optional>

note_store_opt() = {timeout, gc_timeout()} | {verbosity, verbosity()}
Specifies the startup verbosity for the SNMP note store.
Default is silence.

gc_timeout() = integer() <optional>

Note cleanup time. When storing a note in the note store, each note is given lifetime. Every timeout the note_store process performs a GC to remove the expired note's. Time in milli-seconds.
Default is 30000.

audit_trail_log() = [audit_trail_log_opt()] <optional>

audit_trail_log_opt() = {type, atl_type()} | {dir, atl_dir()} | {size, atl_size()} | {repair, atl_repair()}
If present, this option specifies the options for the audit trail logging. The disk_log module is used to maintain a wrap log. If present, the dir and size options are mandatory.
If not present, audit trail logging is not used.

atl_type() = read | write | read_write <optional>

Specifies what type of an audit trail log should be used. The effect of the type is actually different for the the agent and the manager.
For the agent:

• If write is specified, only set requests are logged.
• If read is specified, only get requests are logged.
• If read_write, all requests are logged.

For the manager:

• If write is specified, only sent messages are logged.
• If read is specified, only received messages are logged.
• If read_write, both outgoing and incomming messages are logged.

Default is read_write.

atl_dir = dir() <mandatory>

Specifies where the audit trail log should be stored.
If audit_trail_log specifies that logging should take place, this parameter must be defined.

atl_size() = {integer(), integer()} <mandatory>

Specifies the size of the audit trail log. This parameter is sent to disk_log.
If audit_trail_log specifies that logging should take place, this parameter must be defined.

atl_repair() = true | false | truncate <optional>

Specifies if and how the audit trail log shall be repaired when opened. This parameter is sent to disk_log.
Default is true.

application(3), disk_log(3)

Martin Björklund - support@erlang.ericsson.se