View Source win32reg (stdlib v6.0)

Provides access to the registry on Windows.

This module provides read and write access to the registry on Windows. It is essentially a port driver wrapped around the Win32 API calls for accessing the registry.

The registry is a hierarchical database, used to store various system and software information in Windows. It contains installation data, and is updated by installers and system programs. The Erlang installer updates the registry by adding data that Erlang needs.

The registry contains keys and values. Keys are like the directories in a file system, they form a hierarchy. Values are like files, they have a name and a value, and also a type.

Paths to keys are left to right, with subkeys to the right and backslash between keys. (Remember that backslashes must be doubled in Erlang strings.) Case is preserved but not significant.

For example, "\\hkey_local_machine\\software\\Ericsson\\Erlang\\5.0" is the key for the installation data for the latest Erlang release.

There are six entry points in the Windows registry, top-level keys. They can be abbreviated in this module as follows:

Abbreviation     Registry key
============     ============
hkcr             HKEY_CLASSES_ROOT
current_user     HKEY_CURRENT_USER
hkcu             HKEY_CURRENT_USER
local_machine    HKEY_LOCAL_MACHINE
hklm             HKEY_LOCAL_MACHINE
users            HKEY_USERS
hku              HKEY_USERS
current_config   HKEY_CURRENT_CONFIG
hkcc             HKEY_CURRENT_CONFIG
dyn_data         HKEY_DYN_DATA
hkdd             HKEY_DYN_DATA

The key above can be written as "\\hklm\\software\\ericsson\\erlang\\5.0".

This module uses a current key. It works much like the current directory. From the current key, values can be fetched, subkeys can be listed, and so on.

Under a key, any number of named values can be stored. They have names, types, and data.

win32reg supports storing of the following types:

  • REG_DWORD, which is an integer
  • REG_SZ, which is a string
  • REG_BINARY, which is a binary

Other types can be read, and are returned as binaries.

There is also a "default" value, which has the empty string as name. It is read and written with the atom default instead of the name.

Some registry values are stored as strings with references to environment variables, for example, %SystemRoot%Windows. SystemRoot is an environment variable, and is to be replaced with its value. Function expand/1 is provided so that environment variables surrounded by % can be expanded to their values.

For more information on the Windows registry, see consult the Win32 Programmer's Reference.

See Also

erl_posix_msg, The Windows 95 Registry (book from O'Reilly), Win32 Programmer's Reference (from Microsoft)

Summary

Functions

Changes the current key to another key. Works like cd. The key can be specified as a relative path or as an absolute path, starting with \.

Creates a key, or just changes to it, if it is already there. Works like a combination of mkdir and cd. Calls the Win32 API function RegCreateKeyEx().

Closes the registry. After that, the RegHandle cannot be used.

Returns the path to the current key. This is the equivalent of pwd.

Deletes the current key, if it is valid. Calls the Win32 API function RegDeleteKey(). Notice that this call does not change the current key (unlike change_key_create/2). This means that after the call, the current key is invalid.

Deletes a named value on the current key. The atom default is used for the default value.

Expands a string containing environment variables between percent characters. Anything between two % is taken for an environment variable, and is replaced by the value. Two consecutive % are replaced by one %.

Converts a POSIX error code to a string (by calling file:format_error/1).

Opens the registry for reading or writing. The current key is the root (HKEY_CLASSES_ROOT). Flag read in the mode list can be omitted.

Sets the named (or default) value to value. Calls the Win32 API function RegSetValueEx(). The value can be of three types, and the corresponding registry type is used. The supported types are the following

Returns a list of subkeys to the current key. Calls the Win32 API function EnumRegKeysEx().

Retrieves the named value (or default) on the current key. Registry values of type REG_SZ are returned as strings. Type REG_DWORD values are returned as integers. All other types are returned as binaries.

Retrieves a list of all values on the current key. The values have types corresponding to the registry types, see value/2. Calls the Win32 API function EnumRegValuesEx().

Types

-type name() :: string() | default.
-opaque reg_handle()

As returned by open/1.

Link to this type

value()

View Source (not exported)
-type value() :: string() | integer() | binary().

Functions

Link to this function

change_key(RegHandle, Key)

View Source
-spec change_key(RegHandle, Key) -> ReturnValue
              when
                  RegHandle :: reg_handle(),
                  Key :: string(),
                  ReturnValue :: ok | {error, ErrorId :: atom()}.

Changes the current key to another key. Works like cd. The key can be specified as a relative path or as an absolute path, starting with \.

Link to this function

change_key_create(RegHandle, Key)

View Source
-spec change_key_create(RegHandle, Key) -> ReturnValue
                     when
                         RegHandle :: reg_handle(),
                         Key :: string(),
                         ReturnValue :: ok | {error, ErrorId :: atom()}.

Creates a key, or just changes to it, if it is already there. Works like a combination of mkdir and cd. Calls the Win32 API function RegCreateKeyEx().

The registry must have been opened in write mode.

-spec close(RegHandle) -> ok when RegHandle :: reg_handle().

Closes the registry. After that, the RegHandle cannot be used.

-spec current_key(RegHandle) -> ReturnValue
               when RegHandle :: reg_handle(), ReturnValue :: {ok, string()}.

Returns the path to the current key. This is the equivalent of pwd.

Notice that the current key is stored in the driver, and can be invalid (for example, if the key has been removed).

-spec delete_key(RegHandle) -> ReturnValue
              when RegHandle :: reg_handle(), ReturnValue :: ok | {error, ErrorId :: atom()}.

Deletes the current key, if it is valid. Calls the Win32 API function RegDeleteKey(). Notice that this call does not change the current key (unlike change_key_create/2). This means that after the call, the current key is invalid.

Link to this function

delete_value(RegHandle, Name)

View Source
-spec delete_value(RegHandle, Name) -> ReturnValue
                when
                    RegHandle :: reg_handle(),
                    Name :: name(),
                    ReturnValue :: ok | {error, ErrorId :: atom()}.

Deletes a named value on the current key. The atom default is used for the default value.

The registry must have been opened in write mode.

-spec expand(String) -> ExpandedString when String :: string(), ExpandedString :: string().

Expands a string containing environment variables between percent characters. Anything between two % is taken for an environment variable, and is replaced by the value. Two consecutive % are replaced by one %.

A variable name that is not in the environment results in an error.

-spec format_error(ErrorId) -> ErrorString when ErrorId :: atom(), ErrorString :: string().

Converts a POSIX error code to a string (by calling file:format_error/1).

-spec open(OpenModeList) -> ReturnValue
        when
            OpenModeList :: [OpenMode],
            OpenMode :: read | write,
            ReturnValue :: {ok, RegHandle} | {error, ErrorId :: enotsup},
            RegHandle :: reg_handle().

Opens the registry for reading or writing. The current key is the root (HKEY_CLASSES_ROOT). Flag read in the mode list can be omitted.

Use change_key/2 with an absolute path after open.

Link to this function

set_value(RegHandle, Name, Value)

View Source
-spec set_value(RegHandle, Name, Value) -> ReturnValue
             when
                 RegHandle :: reg_handle(),
                 Name :: name(),
                 Value :: value(),
                 ReturnValue :: ok | {error, ErrorId :: atom()}.

Sets the named (or default) value to value. Calls the Win32 API function RegSetValueEx(). The value can be of three types, and the corresponding registry type is used. The supported types are the following:

  • REG_DWORD for integers
  • REG_SZ for strings
  • REG_BINARY for binaries

Other types cannot be added or changed.

The registry must have been opened in write mode.

-spec sub_keys(RegHandle) -> ReturnValue
            when
                RegHandle :: reg_handle(),
                ReturnValue :: {ok, [SubKey]} | {error, ErrorId :: atom()},
                SubKey :: string().

Returns a list of subkeys to the current key. Calls the Win32 API function EnumRegKeysEx().

Avoid calling this on the root keys, as it can be slow.

-spec value(RegHandle, Name) -> ReturnValue
         when
             RegHandle :: reg_handle(),
             Name :: name(),
             ReturnValue :: {ok, Value :: value()} | {error, ErrorId :: atom()}.

Retrieves the named value (or default) on the current key. Registry values of type REG_SZ are returned as strings. Type REG_DWORD values are returned as integers. All other types are returned as binaries.

-spec values(RegHandle) -> ReturnValue
          when
              RegHandle :: reg_handle(),
              ReturnValue :: {ok, [ValuePair]} | {error, ErrorId :: atom()},
              ValuePair :: {Name :: name(), Value :: value()}.

Retrieves a list of all values on the current key. The values have types corresponding to the registry types, see value/2. Calls the Win32 API function EnumRegValuesEx().