View Source snmp_generic (snmp v5.16)

Generic Functions for Implementing SNMP Objects in a Database

The module snmp_generic contains generic functions for implementing tables (and variables) using the SNMP built-in database or Mnesia. These default functions are used if no instrumentation function is provided for a managed object in a MIB. Sometimes, it might be necessary to customize the behaviour of the default functions. For example, in some situations a trap should be sent if a row is deleted or modified, or some hardware is to be informed, when information is changed.

The overall structure is shown in the following figure:

         +---------------+
         |   SNMP Agent  |
         +- - - - - - - -+
         |      MIB      |
         +---------------+
                 |
         Association file       (associates a MIB object with
                 |               snmp_generic:table_funct
                 |               snmp_generic:variable_func)
+--------------------------------------+
|           snmp_generic               |  Support for get-next,
|                                      |  RowStatus operations
+----------------------+---------------+
|    snmpa_local_db    |    Mnesia     |  Database
+--------------+-------+---------------+
|     dets     |  ets  |
| (persistent) |       |
+--------------+-------+

Each function takes the argument NameDb, which is a tuple {Name, Db}, to identify which database the functions should use. Name is the symbolic name of the managed object as defined in the MIB, and Db is either volatile, persistent, or mnesia. If it is mnesia, all variables are stored in the Mnesia table snmp_variables which must be a table with two attributes (not a Mnesia SNMP table). The SNMP tables are stored in Mnesia tables with the same names as the SNMP tables. All functions assume that a Mnesia table exists with the correct name and attributes. It is the programmer's responsibility to ensure this. Specifically, if variables are stored in Mnesia, the table snmp_variables must be created by the programmer. The record definition for this table is defined in the file snmp/include/snmp_types.hrl.

If an instrumentation function in the association file for a variable myVar does not have a name when compiling an MIB, the compiler generates an entry.

{myVar, {snmp_generic, variable_func, [{myVar, Db]}}.

And for a table:

{myTable, {snmp_generic, table_func, [{myTable, Db]}}.

DATA TYPES

In the functions defined below, the following types are used:

name_db() = {name(), db()}
name() = atom()
db() = volatile | persistent | mnesia
row_index() = [int()]
columns() = [column()] | [{column(), value()}]
column() = int()
value() = term()
  • row_index() - Denotes the last part of the OID which specifies the index of the row in the table (see RFC1212, 4.1.6 for more information about INDEX).

  • columns/0 - Is a list of column numbers in the case of a get operation, and a list of column numbers and values in the case of a set operation.

Example

The following example shows an implementation of a table which is stored in Mnesia, but with some checks performed at set-request operations.

myTable_func(new, NameDb) ->   % pass unchanged
  snmp_generic:table_func(new, NameDb).

myTable_func(delete, NameDb) ->   % pass unchanged
  snmp_generic:table_func(delete, NameDb).

%% change row
myTable_func(is_set_ok, RowIndex, Cols, NameDb) ->
  case snmp_generic:table_func(is_set_ok, RowIndex,
                               Cols, NameDb) of
    {noError, 0} ->
      myApplication:is_set_ok(RowIndex, Cols);
    Err ->
      Err
  end;

myTable_func(set, RowIndex, Cols, NameDb) ->
  case snmp_generic:table_func(set, RowIndex, Cols,
                               NameDb),
    {noError, 0} ->
      % Now the row is updated, tell the application
      myApplication:update(RowIndex, Cols);
    Err ->
      Err
  end;

myTable_func(Op, RowIndex, Cols, NameDb) ->   % pass unchanged
  snmp_generic:table_func(Op, RowIndex, Cols, NameDb).

The .funcs file would look like:

{myTable, {myModule, myTable_func, [{myTable, mnesia}]}}.

Summary

Types

Is a list of column numbers in the case of a get operation, and a list of column numbers and values in the case of a set operation.

For an ordinary table, the types will be the following

Functions

Gets the index types of Name

Gets the value of the status column from Cols.

Get the specific table info item (nbr_of_cols).

This is the default instrumentation function for tables.

This is the default instrumentation function for tables.

Returns a list with values for all columns in Cols. If a column is undefined, its value is noinit.

table_next(NameDb, RestOid) -> RowIndex | endOfTable

table_row_exists(NameDb, RowIndex) -> bool()

table_set_elements(NameDb, RowIndex, Cols) -> bool()

This is the default instrumentation function for variables.

This is the default instrumentation function for variables.

Gets the value of a variable.

Sets a new value to a variable. The variable is created if it does not exist. No checks are made on the type of the new value.

Types

-type column() :: pos_integer().
-type columns() :: [column()] | [{column(), Value :: term()}].

Is a list of column numbers in the case of a get operation, and a list of column numbers and values in the case of a set operation.

Link to this type

table_info_item()

View Source (not exported)
-type table_info_item() ::
    nbr_of_cols | defvals | status_col | not_accessible | index_types | first_accessible |
    first_own_index.

For an ordinary table, the types will be the following:

  • nbr_of_cols - Number of columns.

    Value type: pos_integer()

  • defvals - A list of default values, ordered by column.

    Value type: [{Col :: pos_integer(), DefVal :: term()}]

  • status_col - Column number of the status column.

    Value type: pos_integer()

  • not_accessible - A sorted list of columns (> first_accessible) that are 'not-accessible'.

    Value type: [pos_integer()]

  • index_types - A list of asn1_type() for the index columns, ordered by column number or an "augment"-tuple (see below).

    Value type: [asn1_type()]

  • first_accessible - The first accessible column.

    Value type: pos_integer()

  • first_own_index - Column number of the first own index. Will be 0 if there is no such index for this table.

    Value type: non_neg_integer()

For a augmented table, it will instead look like this:

Functions

-spec get_index_types(Name) -> IndexTypes
                   when Name :: snmpa:name() | snmpa:name_db(), IndexTypes :: [snmp:asn1_type()].

Gets the index types of Name

This function can be used in instrumentation functions to retrieve the index types part of the table info.

Link to this function

get_status_col(Name, Cols)

View Source
-spec get_status_col(Name, Cols) -> false | {value, StatusCol}
                  when
                      Name :: snmpa:name() | snmpa:name_db(),
                      Cols :: columns(),
                      StatusCol :: term().

Gets the value of the status column from Cols.

This function can be used in instrumentation functions for is_set_ok, undo or set to check if the status column of a table is modified.

Link to this function

get_table_info/2

View Source (since OTP R15B01)
-spec get_table_info(Name, Item :: nbr_of_cols) -> Result
                  when Name :: snmpa:name() | snmpa:name_db(), Result :: pos_integer();
              (Name, Item :: defvals) -> Result
                  when
                      Name :: snmpa:name() | snmpa:name_db(),
                      Result :: [{Col, DefVal}],
                      Col :: pos_integer(),
                      DefVal :: term();
              (Name, Item :: status_col) -> Result
                  when Name :: snmpa:name() | snmpa:name_db(), Result :: pos_integer();
              (Name, Item :: not_accessible) -> Result
                  when Name :: snmpa:name() | snmpa:name_db(), Result :: [pos_integer()];
              (Name, Item :: index_types) -> Result
                  when Name :: snmpa:name() | snmpa:name_db(), Result :: [snmp:asn1_type()];
              (Name, Item :: first_accessible) -> Result
                  when Name :: snmpa:name() | snmpa:name_db(), Result :: pos_integer();
              (Name, Item :: first_own_index) -> Result
                  when Name :: snmpa:name() | snmpa:name_db(), Result :: non_neg_integer();
              (Name, Item :: all) -> Result
                  when
                      Name :: snmpa:name() | snmpa:name_db(),
                      Result :: [{table_info_item(), term()}].

Get the specific table info item (nbr_of_cols).

This function can be used in instrumentation functions to retrieve a given part of the table info.

Get a specific table info item (defvals).

This function can be used in instrumentation functions to retrieve a given part of the table info.

Get a specific table info item (status_col).

This function can be used in instrumentation functions to retrieve a given part of the table info.

Get a specific table info item (not_accessible).

This function can be used in instrumentation functions to retrieve a given part of the table info.

Get a specific table info item (index_types).

This function can be used in instrumentation functions to retrieve a given part of the table info.

Get a specific table info item (first_accessible).

This function can be used in instrumentation functions to retrieve a given part of the table info.

Get a specific table info item (first_own_index).

This function can be used in instrumentation functions to retrieve a given part of the table info.

Get all table info item(s), a two tuple list (property list) is returned with all the items and their respctive values of the given table.

This function can be used in instrumentation functions to retrieve a given part of the table info.

-spec table_func(Op, NameDb) -> Return
              when Op :: new | delete, NameDb :: snmpa:name_db(), Return :: term().

This is the default instrumentation function for tables.

  • The new function creates the table if it does not exist, but only if the database is the SNMP internal db.
  • The delete function does not delete the table from the database since unloading an MIB does not necessarily mean that the table should be destroyed.

If it is possible for a manager to create or delete rows in the table, there must be a RowStatus column for is_set_ok, set and undo to work properly.

The function returns according to the specification of an instrumentation function.

Link to this function

table_func(Op, RowIndex, Cols, NameDb)

View Source
-spec table_func(Op, RowIndex, Cols, NameDb) -> Return
              when
                  Op :: get | next | is_set_ok | set | undo,
                  RowIndex :: snmp:row_index(),
                  Cols :: columns(),
                  NameDb :: snmpa:name_db(),
                  Return :: term().

This is the default instrumentation function for tables.

  • The is_set_ok function checks that a row which is to be modified or deleted exists, and that a row which is to be created does not exist.
  • The undo function does nothing.
  • The set function checks if it has enough information to make the row change its status from notReady to notInService (when a row has been been set to createAndWait). If a row is set to createAndWait, columns without a value are set to noinit. If Mnesia is used, the set functionality is handled within a transaction.

If it is possible for a manager to create or delete rows in the table, there must be a RowStatus column for is_set_ok, set and undo to work properly.

The function returns according to the specification of an instrumentation function.

Link to this function

table_get_elements(NameDb, RowIndex, Cols)

View Source
-spec table_get_elements(NameDb, RowIndex, Cols) -> Values
                      when
                          NameDb :: snmpa:name_db(),
                          RowIndex :: snmp:row_index(),
                          Cols :: columns(),
                          Values :: [noinit | Value],
                          Value :: term().

Returns a list with values for all columns in Cols. If a column is undefined, its value is noinit.

table_next(NameDb, RestOid) -> RowIndex | endOfTable

Finds the indices of the next row in the table. RestOid does not have to specify an existing row.

Link to this function

table_row_exists(NameDb, RowIndex)

View Source

table_row_exists(NameDb, RowIndex) -> bool()

Checks if a row in a table exists.

table_set_elements(NameDb, RowIndex, Cols) -> bool()

Sets the elements in Cols to the row specified by RowIndex. No checks are performed on the new values.

If the Mnesia database is used, this function calls mnesia:write to store the values. This means that this function must be called from within a transaction (mnesia:transaction/1).

-spec variable_func(Op :: new, Name) -> Result
                 when Name :: snmpa:name() | snmpa:name_db(), Result :: ok | boolean();
             (Op :: delete, Name) -> Result
                 when Name :: snmpa:name() | snmpa:name_db(), Result :: ok;
             (Op :: get, Name) -> Result
                 when
                     Name :: snmpa:name() | snmpa:name_db(),
                     Result :: {value, Value} | genErr,
                     Value :: term().

This is the default instrumentation function for variables.

The new function creates a new variable in the database with a default value as defined in the MIB, or a zero value (depending on the type).

The function returns according to the specification of an instrumentation function.

This is the default instrumentation function for variables.

The delete function does not delete the variable from the database.

The function returns according to the specification of an instrumentation function.

This is the default instrumentation function for variables.

The function returns according to the specification of an instrumentation function.

-spec variable_func(Op :: is_set_ok, Value, Name) -> Result
                 when Value :: term(), Name :: snmpa:name() | snmpa:name_db(), Result :: noError;
             (Op :: set, Value, Name) -> Result
                 when
                     Value :: term(),
                     Name :: snmpa:name() | snmpa:name_db(),
                     Result :: noError | commitFailed;
             (Op :: undo, Value, Name) -> Result
                 when Value :: term(), Name :: snmpa:name() | snmpa:name_db(), Result :: noError.

This is the default instrumentation function for variables.

The function returns according to the specification of an instrumentation function.

This is the default instrumentation function for variables.

The function returns according to the specification of an instrumentation function.

This is the default instrumentation function for variables.

The function returns according to the specification of an instrumentation function.

-spec variable_get(Name) -> {value, Value} | undefined
                when Name :: snmpa:name() | snmpa:name_db(), Value :: term().

Gets the value of a variable.

Link to this function

variable_set(Name, Value)

View Source
-spec variable_set(Name, Value) -> boolean()
                when Name :: snmpa:name() | snmpa:name_db(), Value :: term().

Sets a new value to a variable. The variable is created if it does not exist. No checks are made on the type of the new value.

Returns false if the NameDb argument is incorrectly specified, otherwise true.