View Source odbc (odbc v2.14.3)

Erlang ODBC application

This application provides an Erlang interface to communicate with relational SQL-databases. It is built on top of Microsofts ODBC interface and therefore requires that you have an ODBC driver to the database that you want to connect to.

Note

The functions first/[1,2], last/[1,2], next/[1,2], prev[1,2] and select/[3,4] assumes there is a result set associated with the connection to work on. Calling the function select_count/[2,3] associates such a result set with the connection. Calling select_count again will remove the current result set association and create a new one. Calling a function which dose not operate on an associated result sets, such as sql_query/[2,3], will remove the current result set association.

Alas some drivers only support sequential traversal of the result set, e.i. they do not support what in the ODBC world is known as scrollable cursors. This will have the effect that functions such as first/[1,2], last/[1,2], prev[1,2], etc will return {error, driver_does_not_support_function}

ERROR HANDLING

The error handling strategy and possible errors sources are described in the Erlang ODBC User's Guide.

REFERENCES

[1]: Microsoft ODBC 3.0, Programmer's Reference and SDK Guide
See also http://msdn.microsoft.com/

Summary

Types: Types used in ODBC application

Name of column in the result set.

An explanation of what went wrong. For common errors there will be atom decriptions.

Opaque reference to an ODBC connection as returnded by connect/2.

extended error type with ODBC and native database error codes, as well as the base reason that would have been returned had extended_errors not been enabled.

The number of affected rows for UPDATE, INSERT, or DELETE queries. For other query types the value is driver defined, and hence should be ignored.

Data type used by ODBC, to learn which Erlang data type corresponds to an ODBC data type see the Erlang to ODBC data type mapping in the User's Guide.

A tuple, with the number of elements selected form columns in a database row, containg the values of the columns such as {value(), value() ... value()}.

Return value for queries that select data from database tabels.

Return value for queries that update database tables.

Erlang data type that corresponds to the ODBC data type being handled.

Functions

Commits or rollbacks a transaction. Needed on connections where automatic commit is turned off.

Opens a connection to the database. The connection is associated with the process that created it and can only be accessed through it. This function may spawn new processes to handle the connection. These processes will terminate if the process that created the connection dies or if you call disconnect/1.

Queries the database to find out the ODBC data types of the columns of the table Table.

Closes a connection to a database. This will also terminate all processes that may have been spawned when the connection was opened. This call will always succeed. If the connection cannot be disconnected gracefully it will be brutally killed. However you may receive an error message as result if you try to disconnect a connection started by another process.

Returns the first row of the result set and positions a cursor at this row.

Returns the last row of the result set and positions a cursor at this row.

Returns the next row of the result set relative the current cursor position and positions the cursor at this row. If the cursor is positioned at the last row of the result set when this function is called the returned value will be {selected, ColNames,[]} e.i. the list of row values is empty indicating that there is no more data to fetch.

Executes a parameterized SQL query. For an example see the "Using the Erlang API" in the Erlang ODBC User's Guide.

Returns the previous row of the result set relative the current cursor position and positions the cursor at this row.

Selects N consecutive rows of the result set. If Position is next it is semantically equivalent of calling next/[1,2] N times. If Position is {relative, Pos}, Pos will be used as an offset from the current cursor position to determine the first selected row. If Position is {absolute, Pos}, Pos will be the number of the first row selected. After this function has returned the cursor is positioned at the last selected row. If there is less then N rows left of the result set the length of Rows will be less than N. If the first row to select happens to be beyond the last row of the result set, the returned value will be {selected, ColNames,[]} e.i. the list of row values is empty indicating that there is no more data to fetch.

Executes a SQL SELECT query and associates the result set with the connection. A cursor is positioned before the first row in the result set and the tuple {ok, NrRows} is returned.

Executes a SQL query or a batch of SQL queries. If it is a SELECT query the result set is returned, on the format {selected, ColNames, Rows}. For other query types the tuple {updated, NRows} is returned, and for batched queries, if the driver supports them, this function can also return a list of result tuples.

Equivalent to start/1.

Starts the odbc application. Default type is temporary. See application(3)

Stops the odbc application. See application(3)

Types: Types used in ODBC application

-type col_name() :: string().

Name of column in the result set.

-type common_reason() :: connection_closed | extended_error() | term().

An explanation of what went wrong. For common errors there will be atom decriptions.

-opaque connection_reference()

Opaque reference to an ODBC connection as returnded by connect/2.

-type extended_error() :: {string(), integer(), term()}.

extended error type with ODBC and native database error codes, as well as the base reason that would have been returned had extended_errors not been enabled.

-type n_rows() :: integer().

The number of affected rows for UPDATE, INSERT, or DELETE queries. For other query types the value is driver defined, and hence should be ignored.

-type odbc_data_type() ::
    sql_integer | sql_smallint | sql_tinyint |
    {sql_decimal, Precision :: integer(), Scale :: integer()} |
    {sql_numeric, Precision :: integer(), Scale :: integer()} |
    {sql_char, Size :: integer()} |
    {sql_wchar, Size :: integer()} |
    {sql_varchar, Size :: integer()} |
    {sql_wvarchar, Size :: integer()} |
    {sql_float, Precision :: integer()} |
    {sql_wlongvarchar, Size :: integer()} |
    {sql_float, Precision :: integer()} |
    sql_real | sql_double | sql_bit |
    atom().

Data type used by ODBC, to learn which Erlang data type corresponds to an ODBC data type see the Erlang to ODBC data type mapping in the User's Guide.

-type row() :: tuple().

A tuple, with the number of elements selected form columns in a database row, containg the values of the columns such as {value(), value() ... value()}.

-type selected() :: {selected, [col_name()], [row()]}.

Return value for queries that select data from database tabels.

-type updated() :: {updated, n_rows()}.

Return value for queries that update database tables.

Link to this type

value()

View Source (not exported)
-type value() :: null | term().

Erlang data type that corresponds to the ODBC data type being handled.

Functions

Link to this function

commit(ConnectionReference, CommitMode)

View Source
-spec commit(ConnectionReference, CommitMode) -> ok | {error, Reason}
          when
              ConnectionReference :: connection_reference(),
              CommitMode :: commit | rollback,
              Reason ::
                  not_an_explicit_commit_connection | process_not_owner_of_odbc_connection |
                  common_reason().

Equivalent to commit/3.

Link to this function

commit(ConnectionReference, CommitMode, TimeOut)

View Source
-spec commit(ConnectionReference, CommitMode, TimeOut) -> ok | {error, Reason}
          when
              ConnectionReference :: connection_reference(),
              CommitMode :: commit | rollback,
              TimeOut :: erlang:timeout(),
              Reason ::
                  not_an_explicit_commit_connection | process_not_owner_of_odbc_connection |
                  common_reason().

Commits or rollbacks a transaction. Needed on connections where automatic commit is turned off.

Link to this function

connect(ConnectionStr, Options)

View Source
-spec connect(ConnectionStr, Options) -> {ok, ConnectionReferense} | {error, Reason}
           when
               ConnectionStr :: string(),
               Options ::
                   [{auto_commit, on | off} |
                    {timeout, erlang:timeout()} |
                    {binary_strings, on | off} |
                    {tuple_row, on | off} |
                    {scrollable_cursors, on | off} |
                    {trace_driver, on | off} |
                    {extended_errors, on | off}],
               ConnectionReferense :: connection_reference(),
               Reason :: port_program_executable_not_found | common_reason().

Opens a connection to the database. The connection is associated with the process that created it and can only be accessed through it. This function may spawn new processes to handle the connection. These processes will terminate if the process that created the connection dies or if you call disconnect/1.

If automatic commit mode is turned on, each query will be considered as an individual transaction and will be automatically committed after it has been executed. If you want more than one query to be part of the same transaction the automatic commit mode should be turned off. Then you will have to call commit/3 explicitly to end a transaction.

The default timeout is infinity

If the option binary_strings is turned on all strings will be returned as binaries and strings inputted to param_query will be expected to be binaries. The user needs to ensure that the binary is in an encoding that the database expects. By default this option is turned off.

As default result sets are returned as a lists of tuples. The TupleMode option still exists to keep some degree of backwards compatibility. If the option is set to off, result sets will be returned as a lists of lists instead of a lists of tuples.

Scrollable cursors are nice but causes some overhead. For some connections speed might be more important than flexible data access and then you can disable scrollable cursor for a connection, limiting the API but gaining speed.

Note

Turning the scrollable_cursors option off is noted to make old odbc-drivers able to connect that will otherwise fail.

If trace mode is turned on this tells the ODBC driver to write a trace log to the file SQL.LOG that is placed in the current directory of the erlang emulator. This information may be useful if you suspect there might be a bug in the erlang ODBC application, and it might be relevant for you to send this file to our support. Otherwise you will probably not have much use of this.

Note

For more information about the ConnectStr see description of the function SQLDriverConnect in [1].

The extended_errors option enables extended ODBC error information when an operation fails. Rather than returning {error, Reason}, the failing function will return {error, {ODBCErrorCode, NativeErrorCode, Reason}}. Note that this information is probably of little use when writing database-independent code, but can be of assistance in providing more sophisticated error handling when dealing with a known underlying database.

  • ODBCErrorCode is the ODBC error string returned by the ODBC driver.
  • NativeErrorCode is the numeric error code returned by the underlying database. The possible values and their meanings are dependent on the database being used.
  • Reason is as per the Reason field when extended errors are not enabled.

Note

The current implementation spawns a port program written in C that utilizes the actual ODBC driver. There is a default timeout of 5000 msec for this port program to connect to the Erlang ODBC application. This timeout can be changed by setting an application specific environment variable 'port_timeout' with the number of milliseconds for the ODBC application. E.g.: [{odbc, [{port_timeout, 60000}]}] to set it to 60 seconds.

Link to this function

describe_table(ConnectionReference, Table)

View Source
-spec describe_table(ConnectionReference, Table) -> {ok, Description} | {error, Reason}
                  when
                      ConnectionReference :: connection_reference(),
                      Table :: string(),
                      Description :: [{col_name(), odbc_data_type()}],
                      Reason :: process_not_owner_of_odbc_connection | common_reason().

Equivalent to describe_table/3.

Link to this function

describe_table(ConnectionReference, Table, TimeOut)

View Source
-spec describe_table(ConnectionReference, Table, TimeOut) -> {ok, Description} | {error, Reason}
                  when
                      ConnectionReference :: connection_reference(),
                      Table :: string(),
                      TimeOut :: erlang:timeout(),
                      Description :: [{col_name(), odbc_data_type()}],
                      Reason :: process_not_owner_of_odbc_connection | common_reason().

Queries the database to find out the ODBC data types of the columns of the table Table.

Link to this function

disconnect(ConnectionReferense)

View Source
-spec disconnect(ConnectionReferense) -> ok | {error, Reason}
              when
                  ConnectionReferense :: connection_reference(),
                  Reason :: process_not_owner_of_odbc_connection | extended_error().

Closes a connection to a database. This will also terminate all processes that may have been spawned when the connection was opened. This call will always succeed. If the connection cannot be disconnected gracefully it will be brutally killed. However you may receive an error message as result if you try to disconnect a connection started by another process.

Link to this function

first(ConnectionReference)

View Source
-spec first(ConnectionReference) -> Result | {error, Reason}
         when
             ConnectionReference :: connection_reference(),
             Result :: selected(),
             Reason ::
                 result_set_does_not_exist | driver_does_not_support_function |
                 scrollable_cursors_disabled | process_not_owner_of_odbc_connection |
                 common_reason().

Equivalent to first/2.

Link to this function

first(ConnectionReference, TimeOut)

View Source
-spec first(ConnectionReference, TimeOut) -> Result | {error, Reason}
         when
             ConnectionReference :: connection_reference(),
             TimeOut :: erlang:timeout(),
             Result :: selected(),
             Reason ::
                 result_set_does_not_exist | driver_does_not_support_function |
                 scrollable_cursors_disabled | process_not_owner_of_odbc_connection |
                 common_reason().

Returns the first row of the result set and positions a cursor at this row.

Link to this function

last(ConnectionReference)

View Source
-spec last(ConnectionReference) -> Result | {error, Reason}
        when
            ConnectionReference :: connection_reference(),
            Result :: selected(),
            Reason ::
                result_set_does_not_exist | driver_does_not_support_function |
                scrollable_cursors_disabled | process_not_owner_of_odbc_connection |
                common_reason().

Equivalent to last/2.

Link to this function

last(ConnectionReference, TimeOut)

View Source
-spec last(ConnectionReference, TimeOut) -> Result | {error, Reason}
        when
            ConnectionReference :: connection_reference(),
            TimeOut :: erlang:timeout(),
            Result :: selected(),
            Reason ::
                result_set_does_not_exist | driver_does_not_support_function |
                scrollable_cursors_disabled | process_not_owner_of_odbc_connection |
                common_reason().

Returns the last row of the result set and positions a cursor at this row.

Link to this function

next(ConnectionReference)

View Source
-spec next(ConnectionReference) -> Result | {error, Reason}
        when
            ConnectionReference :: connection_reference(),
            Result :: selected(),
            Reason ::
                result_set_does_not_exist | driver_does_not_support_function |
                scrollable_cursors_disabled | process_not_owner_of_odbc_connection |
                common_reason().

Equivalent to next/2.

Link to this function

next(ConnectionReference, TimeOut)

View Source
-spec next(ConnectionReference, TimeOut) -> Result | {error, Reason}
        when
            ConnectionReference :: connection_reference(),
            TimeOut :: erlang:timeout(),
            Result :: selected(),
            Reason ::
                result_set_does_not_exist | driver_does_not_support_function |
                scrollable_cursors_disabled | process_not_owner_of_odbc_connection |
                common_reason().

Returns the next row of the result set relative the current cursor position and positions the cursor at this row. If the cursor is positioned at the last row of the result set when this function is called the returned value will be {selected, ColNames,[]} e.i. the list of row values is empty indicating that there is no more data to fetch.

Link to this function

param_query(ConnectionReference, SQLQuery, Params)

View Source
-spec param_query(ConnectionReference, SQLQuery, Params) -> Result | {error, Reason}
               when
                   ConnectionReference :: connection_reference(),
                   SQLQuery :: string(),
                   Params ::
                       [{odbc_data_type(), [value()]}] |
                       [{odbc_data_type(), in | out | inout, [value()]}],
                   Result :: selected() | updated(),
                   Reason ::
                       driver_does_not_support_function | process_not_owner_of_odbc_connection |
                       common_reason().

Equivalent to param_query/4.

Link to this function

param_query(ConnectionReference, SQLQuery, Params, TimeOut)

View Source
-spec param_query(ConnectionReference, SQLQuery, Params, TimeOut) -> Result | {error, Reason}
               when
                   ConnectionReference :: connection_reference(),
                   SQLQuery :: string(),
                   Params ::
                       [{odbc_data_type(), [value()]}] |
                       [{odbc_data_type(), in | out | inout, [value()]}],
                   TimeOut :: erlang:timeout(),
                   Result :: selected() | updated(),
                   Reason ::
                       driver_does_not_support_function | process_not_owner_of_odbc_connection |
                       common_reason().

Executes a parameterized SQL query. For an example see the "Using the Erlang API" in the Erlang ODBC User's Guide.

Note

Use the function describe_table/[2,3] to find out which ODBC data type that is expected for each column of that table. If a column has a data type that is described with capital letters, alas it is not currently supported by the param_query function. To learn which Erlang data type corresponds to an ODBC data type see the Erlang to ODBC data type mapping in the User's Guide.

Link to this function

prev(ConnectionReference)

View Source
-spec prev(ConnectionReference) -> Result | {error, Reason}
        when
            ConnectionReference :: connection_reference(),
            Result :: selected(),
            Reason ::
                result_set_does_not_exist | driver_does_not_support_function |
                scrollable_cursors_disabled | process_not_owner_of_odbc_connection |
                common_reason().

Equivalent to prev/2.

Link to this function

prev(ConnectionReference, TimeOut)

View Source
-spec prev(ConnectionReference, TimeOut) -> Result | {error, Reason}
        when
            ConnectionReference :: connection_reference(),
            TimeOut :: erlang:timeout(),
            Result :: selected(),
            Reason ::
                result_set_does_not_exist | driver_does_not_support_function |
                scrollable_cursors_disabled | process_not_owner_of_odbc_connection |
                common_reason().

Returns the previous row of the result set relative the current cursor position and positions the cursor at this row.

Link to this function

select(ConnectionReference, Position, N)

View Source
-spec select(ConnectionReference, Position, N) -> Result | {error, Reason}
          when
              ConnectionReference :: connection_reference(),
              Position :: next | {relative, integer()} | {absolute, integer()},
              N :: integer(),
              Result :: selected(),
              Reason ::
                  result_set_does_not_exist | driver_does_not_support_function |
                  scrollable_cursors_disabled | process_not_owner_of_odbc_connection |
                  common_reason().

Equivalent to select/4.

Link to this function

select(ConnectionReference, Position, N, TimeOut)

View Source
-spec select(ConnectionReference, Position, N, TimeOut) -> Result | {error, Reason}
          when
              ConnectionReference :: connection_reference(),
              Position :: next | {relative, integer()} | {absolute, integer()},
              N :: integer(),
              TimeOut :: erlang:timeout(),
              Result :: selected(),
              Reason ::
                  result_set_does_not_exist | driver_does_not_support_function |
                  scrollable_cursors_disabled | process_not_owner_of_odbc_connection |
                  common_reason().

Selects N consecutive rows of the result set. If Position is next it is semantically equivalent of calling next/[1,2] N times. If Position is {relative, Pos}, Pos will be used as an offset from the current cursor position to determine the first selected row. If Position is {absolute, Pos}, Pos will be the number of the first row selected. After this function has returned the cursor is positioned at the last selected row. If there is less then N rows left of the result set the length of Rows will be less than N. If the first row to select happens to be beyond the last row of the result set, the returned value will be {selected, ColNames,[]} e.i. the list of row values is empty indicating that there is no more data to fetch.

Link to this function

select_count(ConnectionReference, SQLQuery)

View Source
-spec select_count(ConnectionReference, SQLQuery) -> {ok, NrRows} | {error, Reason}
                when
                    ConnectionReference :: connection_reference(),
                    SQLQuery :: string(),
                    NrRows :: n_rows(),
                    Reason :: process_not_owner_of_odbc_connection | common_reason().

Equivalent to select_count/3.

Link to this function

select_count(ConnectionReference, SQLQuery, TimeOut)

View Source
-spec select_count(ConnectionReference, SQLQuery, TimeOut) -> {ok, NrRows} | {error, Reason}
                when
                    ConnectionReference :: connection_reference(),
                    SQLQuery :: string(),
                    TimeOut :: erlang:timeout(),
                    NrRows :: n_rows(),
                    Reason :: process_not_owner_of_odbc_connection | common_reason().

Executes a SQL SELECT query and associates the result set with the connection. A cursor is positioned before the first row in the result set and the tuple {ok, NrRows} is returned.

Note

Some drivers may not have the information of the number of rows in the result set, then NrRows will have the value undefined.

Link to this function

sql_query(ConnectionReference, SQLQuery)

View Source
-spec sql_query(ConnectionReference, SQLQuery) -> Result | {error, Reason}
             when
                 ConnectionReference :: connection_reference(),
                 SQLQuery :: string(),
                 Result :: updated() | selected(),
                 Reason :: process_not_owner_of_odbc_connection | common_reason().

Equivalent to sql_query/3.

Link to this function

sql_query(ConnectionReference, SQLQuery, TimeOut)

View Source
-spec sql_query(ConnectionReference, SQLQuery, TimeOut) -> Result | {error, Reason}
             when
                 ConnectionReference :: connection_reference(),
                 SQLQuery :: string(),
                 TimeOut :: erlang:timeout(),
                 Result :: updated() | selected(),
                 Reason :: process_not_owner_of_odbc_connection | common_reason().

Executes a SQL query or a batch of SQL queries. If it is a SELECT query the result set is returned, on the format {selected, ColNames, Rows}. For other query types the tuple {updated, NRows} is returned, and for batched queries, if the driver supports them, this function can also return a list of result tuples.

Note

Some drivers may not have the information of the number of affected rows available and then the return value may be {updated, undefined}.

The list of column names is ordered in the same way as the list of values of a row, e.g. the first ColName is associated with the first Value in a Row.

-spec start() -> ok | {error, Reason} when Reason :: term().

Equivalent to start/1.

-spec start(Type) -> ok | {error, Reason}
         when Type :: permanent | transient | temporary, Reason :: term().

Starts the odbc application. Default type is temporary. See application(3)

-spec stop() -> ok.

Stops the odbc application. See application(3)