-spec application(atom()) -> ok.

Equivalent to application(Application, []).

-spec application(App, Options) -> ok when App :: atom(), Options :: proplist().

Run EDoc on an application in its default app-directory. See application/3 for details.

See also: application/1.

-spec application(App, Dir, Options) -> ok when App :: atom(), Dir :: filename(), Options :: proplist().

Run EDoc on an application located in the specified directory. Tries to automatically set up good defaults. Unless the user specifies otherwise:

• The doc subdirectory will be used as the target directory, if it exists; otherwise the application directory is used.
• The source code is assumed to be located in the src subdirectory, if it exists, or otherwise in the application directory itself.
• The subpackages option is turned on. All found source files will be processed.
• The include subdirectory is automatically added to the include path. (Only important if preprocessing is turned on.)

See run/2 for details, including options.

See also: application/2.

-spec file(filename()) -> ok.

Equivalent to file(Name, []).

-spec file(Name, Options) -> ok when Name :: filename(), Options :: proplist().

Reads a source code file and outputs formatted documentation to a corresponding file.

Options:

{dir, filename()}

Specifies the output directory for the created file. (By default, the output is written to the directory of the source file.)

{source_suffix, string()}

Specifies the expected suffix of the input file. The default value is ".erl".

{file_suffix, string()}

Specifies the suffix for the created file. The default value is ".html".

See get_doc/2 and layout/2 for further options.

For running EDoc from a Makefile or similar, see edoc_run:file/1.

See also: read/2.

-spec files(Files, Options) -> ok when Files :: [filename()], Options :: proplist().

Equivalent to run(Files, Options).

Runs EDoc on a given set of source files. See run/2 for details, including options.

-spec get_doc(filename()) -> {module(), edoc_module()}.

Equivalent to get_doc(File, []).

-spec get_doc(File, Options) -> R
           when
               File :: filename(),
               Options :: proplist(),
               R :: {module(), edoc_module()} | {module(), edoc_module(), [entry()]}.

Reads a source code file and extracts EDoc documentation data. Note that without an environment parameter (see get_doc/3), hypertext links may not be correct.

Options:

{def, Macros}

• Macros = Macro | [Macro]
• Macro = {Name::atom(), Text::string() | MacroFun}
• MacroFun = fun((MacroArgument::string(), Line :: integer(), edoc_lib:edoc_env()) -> (Text::string()))

Specifies a set of user-defined EDoc macros. The text substituted for macro calls is specified as either a string() or a function(). The function is called with the macro argument text, the current line number, and the current environment. The fun is to return a string(). See Macro expansion for details.

{hidden, boolean()}

If the value is true, documentation of hidden functions will also be included. The default value is false.

{private, boolean()}

If the value is true, documentation of private functions will also be included. The default value is false.

{todo, boolean()}

If the value is true, To-Do notes written using @todo or @TODO tags will be included in the documentation. The default value is false.

See read_source/2, read_comments/2 and edoc_lib:get_doc_env/3 for further options.

See also: get_doc/3, layout/2, read/2, run/2, edoc_extract:source/5.

-spec get_doc(File, Env, Options) -> R
           when
               File :: filename(),
               Env :: env(),
               Options :: proplist(),
               R :: {module(), edoc_module()} | {module(), edoc_module(), [entry()]}.

Like get_doc/2, but for a given environment parameter. Env is an environment created by edoc_lib:get_doc_env/3.

-spec layout(edoc_module()) -> string().

Equivalent to layout(Doc, []).

-spec layout(Doc, Opts) -> term() when Doc :: edoc_module(), Opts :: proplist().

Transforms EDoc module documentation data to text. The default layout creates an HTML document.

Options:

{layout, Module::atom()}

Specifies a callback module to be used for formatting. The module must export a function module(Doc, Options). The default callback module is edoc_layout; see edoc_layout:module/2 for layout-specific options.

See also: file/2, layout/1, read/2, run/2.

-spec read(filename()) -> string().

Equivalent to read(File, []).

-spec read(File, Opts) -> string() when File :: filename(), Opts :: proplist().

Reads and processes a source file and returns the resulting EDoc-text as a string. See get_doc/2 and layout/2 for options.

See also: file/2.

-spec read_comments(filename()) -> [comment()].

Equivalent to read_comments(File, []).

-spec read_comments(File, Opts) -> [comment()] when File :: filename(), Opts :: proplist().

Extracts comments from an Erlang source code file. See the module erl_comment_scan for details on the representation of comments. Currently, no options are available.

-spec read_source(filename()) -> [syntaxTree()].

Equivalent to read_source(File, []).

-spec read_source(File, Opts) -> [syntaxTree()] when File :: filename(), Opts :: proplist().

Reads an Erlang source file and returns the list of "source code form" syntax trees.

Options:

{preprocess, boolean()}

If the value is true, the source file will be read via the Erlang preprocessor (epp). The default value is false. no_preprocess is an alias for {preprocess, false}.

Normally, preprocessing is not necessary for EDoc to work, but if a file contains too exotic definitions or uses of macros, it will not be possible to read it without preprocessing. Note: comments in included files will not be available to EDoc, even with this option enabled.

{includes, Path::[string()]}

Specifies a list of directory names to be searched for include files, if the preprocess option is turned on. Also used with the @headerfile tag. The default value is the empty list. The directory of the source file is always automatically appended to the search path.

{macros, [{atom(), term()}]}

Specifies a list of pre-defined Erlang preprocessor (epp) macro definitions, used if the preprocess option is turned on. The default value is the empty list.

{report_missing_types, boolean()}

If the value is true, warnings are issued for missing types. The default value is false. no_report_missing_types is an alias for {report_missing_types, false}.

{link_predefined_types, boolean()}

If the value is true, all predefined data types will have a link to the erlang module. This option is to be used when generating documentation for the Erlang/OTP docs. The default value is false. no_link_predefined_types is an alias for {link_predefined_types, false}.

See also: //syntax_tools/erl_syntax, get_doc/2.

-spec run(Files, Opts) -> ok when Files :: [filename()], Opts :: proplist().

Runs EDoc on a given set of source files. Note that the doclet plugin module has its own particular options; see the doclet option below.

Also see layout/2 for layout-related options, and get_doc/2 for options related to reading source files.

Options:

{app_default, string()}

Specifies the default base URI for unknown applications.

{application, App::atom()}

Specifies that the generated documentation describes the application App. This mainly affects generated references.

{dir, filename()}

Specifies the target directory for the generated documentation.

{doc_path, [string()]}

Specifies a list of file system paths pointing to directories that contain EDoc-generated documentation. All paths for applications in the code path are automatically added.

{doclet, Module::atom()}

Specifies a callback module to be used for creating the documentation. The module must export a function run(Cmd, Ctxt). The default doclet module is edoc_doclet; see edoc_doclet:run/2 for doclet-specific options.

{file_suffix, string()}

Specifies the suffix used for output files. The default value is ".html". Note that this also affects generated references.

{new, boolean()}

If the value is true, any existing edoc-info file in the target directory will be ignored and overwritten. The default value is false.

{source_path, [filename()]}

Specifies a list of file system paths used to locate the source code for packages.

{source_suffix, string()}

Specifies the expected suffix of input files. The default value is ".erl".

{subpackages, boolean()}

If the value is true, all subpackages of specified packages will also be included in the documentation. The default value is false. no_subpackages is an alias for {subpackages, false}.

Subpackage source files are found by recursively searching for source code files in subdirectories of the known source code root directories. (Also see the source_path option.) Directory names must begin with a lowercase letter and contain only alphanumeric characters and underscore, or they will be ignored. (For example, a subdirectory named test-files will not be searched.)

See also: application/2, files/2.