View Source file_sorter (stdlib v6.0)

File sorter.

This module contains functions for sorting terms on files, merging already sorted files, and checking files for sortedness. Chunks containing binary terms are read from a sequence of files, sorted internally in memory and written on temporary files, which are merged producing one sorted file as output. Merging is provided as an optimization; it is faster when the files are already sorted, but it always works to sort instead of merge.

On a file, a term is represented by a header and a binary. Two options define the format of terms on files:

  • {header, HeaderLength} - HeaderLength determines the number of bytes preceding each binary and containing the length of the binary in bytes. Defaults to 4. The order of the header bytes is defined as follows: if B is a binary containing a header only, size Size of the binary is calculated as <<Size:HeaderLength/unit:8>> = B.

  • {format, Format} - Option Format determines the function that is applied to binaries to create the terms to be sorted. Defaults to binary_term, which is equivalent to fun binary_to_term/1. Value binary is equivalent to fun(X) -> X end, which means that the binaries are sorted as they are. This is the fastest format. If Format is term, io:read/2 is called to read terms. In that case, only the default value of option header is allowed.

    Option format also determines what is written to the sorted output file: if Format is term, then io:format/3 is called to write each term, otherwise the binary prefixed by a header is written. Notice that the binary written is the same binary that was read; the results of applying function Format are thrown away when the terms have been sorted. Reading and writing terms using the io module is much slower than reading and writing binaries.

Other options are:

  • {order, Order} - The default is to sort terms in ascending order, but that can be changed by value descending or by specifying an ordering function Fun. An ordering function is antisymmetric, transitive, and total. Fun(A, B) is to return true if A comes before B in the ordering, otherwise false. An example of a typical ordering function is less than or equal to, =</2. Using an ordering function slows down the sort considerably. Functions keysort, keymerge and keycheck do not accept ordering functions.

  • {unique, boolean()} - When sorting or merging files, only the first of a sequence of terms that compare equal (==) is output if this option is set to true. Defaults to false, which implies that all terms that compare equal are output. When checking files for sortedness, a check that no pair of consecutive terms compares equal is done if this option is set to true.

  • {tmpdir, TempDirectory} - The directory where temporary files are put can be chosen explicitly. The default, implied by value "", is to put temporary files on the same directory as the sorted output file. If output is a function (see below), the directory returned by file:get_cwd() is used instead. The names of temporary files are derived from the Erlang nodename (node/0), the process identifier of the current Erlang emulator (os:getpid()), and a unique integer (erlang:unique_integer([positive])). A typical name is fs_mynode@myhost_1763_4711.17, where 17 is a sequence number. Existing files are overwritten. Temporary files are deleted unless some uncaught EXIT signal occurs.

  • {compressed, boolean()} - Temporary files and the output file can be compressed. Defaults false, which implies that written files are not compressed. Regardless of the value of option compressed, compressed files can always be read. Notice that reading and writing compressed files are significantly slower than reading and writing uncompressed files.

  • {size, Size} - By default about 512*1024 bytes read from files are sorted internally. This option is rarely needed.

  • {no_files, NoFiles} - By default 16 files are merged at a time. This option is rarely needed.

As an alternative to sorting files, a function of one argument can be specified as input. When called with argument read, the function is assumed to return either of the following:

  • end_of_input or {end_of_input, Value}} when there is no more input (Value is explained below).
  • {Objects, Fun}, where Objects is a list of binaries or terms depending on the format, and Fun is a new input function.

Any other value is immediately returned as value of the current call to sort or keysort. Each input function is called exactly once. If an error occurs, the last function is called with argument close, the reply of which is ignored.

A function of one argument can be specified as output. The results of sorting or merging the input is collected in a non-empty sequence of variable length lists of binaries or terms depending on the format. The output function is called with one list at a time, and is assumed to return a new output function. Any other return value is immediately returned as value of the current call to the sort or merge function. Each output function is called exactly once. When some output function has been applied to all of the results or an error occurs, the last function is called with argument close, and the reply is returned as value of the current call to the sort or merge function.

If a function is specified as input and the last input function returns {end_of_input, Value}, the function specified as output is called with argument {value, Value}. This makes it easy to initiate the sequence of output functions with a value calculated by the input functions.

As an example, consider sorting the terms on a disk log file. A function that reads chunks from the disk log and returns a list of binaries is used as input. The results are collected in a list of terms.

sort(Log) ->
    {ok, _} = disk_log:open([{name,Log}, {mode,read_only}]),
    Input = input(Log, start),
    Output = output([]),
    Reply = file_sorter:sort(Input, Output, {format,term}),
    ok = disk_log:close(Log),
    Reply.

input(Log, Cont) ->
    fun(close) ->
            ok;
       (read) ->
            case disk_log:chunk(Log, Cont) of
                {error, Reason} ->
                    {error, Reason};
                {Cont2, Terms} ->
                    {Terms, input(Log, Cont2)};
                {Cont2, Terms, _Badbytes} ->
                    {Terms, input(Log, Cont2)};
                eof ->
                    end_of_input
            end
    end.

output(L) ->
    fun(close) ->
            lists:append(lists:reverse(L));
       (Terms) ->
            output([Terms | L])
    end.

For more examples of functions as input and output, see the end of the file_sorter module; the term format is implemented with functions.

The possible values of Reason returned when an error occurs are:

  • bad_object, {bad_object, FileName} - Applying the format function failed for some binary, or the key(s) could not be extracted from some term.
  • {bad_term, FileName} - io:read/2 failed to read some term.
  • {file_error, FileName, file:posix()} - For an explanation of file:posix(), see file.
  • {premature_eof, FileName} - End-of-file was encountered inside some binary term.

Summary

Functions

Checks files for sortedness. If a file is not sorted, the first out-of-order element is returned. The first term on a file has position 1.

Checks files for sortedness. If a file is not sorted, the first out-of-order element is returned. The first term on a file has position 1.

Merges tuples on files. Each input file is assumed to be sorted on key(s).

Sorts tuples on files.

Sorts tuples on files. The sort is performed on the element(s) mentioned in KeyPos. If two tuples compare equal (==) on one element, the next element according to KeyPos is compared. The sort is stable.

Merges terms on files. Each input file is assumed to be sorted.

Sorts terms on files.

Sorts terms on files.

Types

Link to this type

file_name()

View Source (not exported)
-type file_name() :: file:name().
Link to this type

file_names()

View Source (not exported)
-type file_names() :: [file:name()].
Link to this type

format()

View Source (not exported)
-type format() :: binary_term | term | binary | format_fun().
Link to this type

format_fun()

View Source (not exported)
-type format_fun() :: fun((binary()) -> term()).
Link to this type

header_length()

View Source (not exported)
-type header_length() :: pos_integer().
Link to this type

i_command()

View Source (not exported)
-type i_command() :: read | close.
Link to this type

i_reply()

View Source (not exported)
-type i_reply() :: end_of_input | {end_of_input, value()} | {[object()], infun()} | input_reply().
Link to this type

infun()

View Source (not exported)
-type infun() :: fun((i_command()) -> i_reply()).
Link to this type

input()

View Source (not exported)
-type input() :: file_names() | infun().
Link to this type

input_reply()

View Source (not exported)
-type input_reply() :: term().
Link to this type

key_pos()

View Source (not exported)
-type key_pos() :: pos_integer() | [pos_integer()].
Link to this type

no_files()

View Source (not exported)
-type no_files() :: pos_integer().
Link to this type

o_command()

View Source (not exported)
-type o_command() :: {value, value()} | [object()] | close.
Link to this type

o_reply()

View Source (not exported)
-type o_reply() :: outfun() | output_reply().
Link to this type

object()

View Source (not exported)
-type object() :: term() | binary().
Link to this type

option()

View Source (not exported)
-type option() ::
    {compressed, boolean()} |
    {header, header_length()} |
    {format, format()} |
    {no_files, no_files()} |
    {order, order()} |
    {size, size()} |
    {tmpdir, tmp_directory()} |
    {unique, boolean()}.
Link to this type

options()

View Source (not exported)
-type options() :: [option()] | option().
Link to this type

order()

View Source (not exported)
-type order() :: ascending | descending | order_fun().
Link to this type

order_fun()

View Source (not exported)
-type order_fun() :: fun((term(), term()) -> boolean()).
Link to this type

outfun()

View Source (not exported)
-type outfun() :: fun((o_command()) -> o_reply()).
Link to this type

output()

View Source (not exported)
-type output() :: file_name() | outfun().
Link to this type

output_reply()

View Source (not exported)
-type output_reply() :: term().
-type reason() ::
    bad_object |
    {bad_object, file_name()} |
    {bad_term, file_name()} |
    {file_error, file_name(), file:posix() | badarg | system_limit} |
    {premature_eof, file_name()}.
-type size() :: non_neg_integer().
Link to this type

tmp_directory()

View Source (not exported)
-type tmp_directory() :: [] | file:name().
Link to this type

value()

View Source (not exported)
-type value() :: term().

Functions

-spec check(FileName) -> Reply
         when
             FileName :: file_name(),
             Reply :: {ok, [Result]} | {error, reason()},
             Result :: {FileName, TermPosition, term()},
             TermPosition :: pos_integer().

Equivalent to check([FileName], [])

Link to this function

check(FileNames, Options)

View Source
-spec check(FileNames, Options) -> Reply
         when
             FileNames :: file_names(),
             Options :: options(),
             Reply :: {ok, [Result]} | {error, reason()},
             Result :: {FileName, TermPosition, term()},
             FileName :: file_name(),
             TermPosition :: pos_integer().

Checks files for sortedness. If a file is not sorted, the first out-of-order element is returned. The first term on a file has position 1.

Link to this function

keycheck(KeyPos, FileName)

View Source
-spec keycheck(KeyPos, FileName) -> Reply
            when
                KeyPos :: key_pos(),
                FileName :: file_name(),
                Reply :: {ok, [Result]} | {error, reason()},
                Result :: {FileName, TermPosition, term()},
                TermPosition :: pos_integer().

Equivalent to keycheck(KeyPos, [Filename], [])

Link to this function

keycheck(KeyPos, FileNames, Options)

View Source
-spec keycheck(KeyPos, FileNames, Options) -> Reply
            when
                KeyPos :: key_pos(),
                FileNames :: file_names(),
                Options :: options(),
                Reply :: {ok, [Result]} | {error, reason()},
                Result :: {FileName, TermPosition, term()},
                FileName :: file_name(),
                TermPosition :: pos_integer().

Checks files for sortedness. If a file is not sorted, the first out-of-order element is returned. The first term on a file has position 1.

Link to this function

keymerge(KeyPos, FileNames, Output)

View Source
-spec keymerge(KeyPos, FileNames, Output) -> Reply
            when
                KeyPos :: key_pos(),
                FileNames :: file_names(),
                Output :: output(),
                Reply :: ok | {error, reason()} | output_reply().

Equivalent to keymerge(KeyPos, FileNames, Output, [])

Link to this function

keymerge(KeyPos, FileNames, Output, Options)

View Source
-spec keymerge(KeyPos, FileNames, Output, Options) -> Reply
            when
                KeyPos :: key_pos(),
                FileNames :: file_names(),
                Output :: output(),
                Options :: options(),
                Reply :: ok | {error, reason()} | output_reply().

Merges tuples on files. Each input file is assumed to be sorted on key(s).

Link to this function

keysort(KeyPos, FileName)

View Source
-spec keysort(KeyPos, FileName) -> Reply
           when
               KeyPos :: key_pos(),
               FileName :: file_name(),
               Reply :: ok | {error, reason()} | input_reply() | output_reply().

Sorts tuples on files.

Link to this function

keysort(KeyPos, Input, Output)

View Source
-spec keysort(KeyPos, Input, Output) -> Reply
           when
               KeyPos :: key_pos(),
               Input :: input(),
               Output :: output(),
               Reply :: ok | {error, reason()} | input_reply() | output_reply().

Equivalent to keysort(KeyPos, Input, Output, [])

Link to this function

keysort(KeyPos, Input, Output, Options)

View Source
-spec keysort(KeyPos, Input, Output, Options) -> Reply
           when
               KeyPos :: key_pos(),
               Input :: input(),
               Output :: output(),
               Options :: options(),
               Reply :: ok | {error, reason()} | input_reply() | output_reply().

Sorts tuples on files. The sort is performed on the element(s) mentioned in KeyPos. If two tuples compare equal (==) on one element, the next element according to KeyPos is compared. The sort is stable.

Link to this function

merge(FileNames, Output)

View Source
-spec merge(FileNames, Output) -> Reply
         when
             FileNames :: file_names(),
             Output :: output(),
             Reply :: ok | {error, reason()} | output_reply().

Equivalent to merge(FileNames, Output, [])

Link to this function

merge(FileNames, Output, Options)

View Source
-spec merge(FileNames, Output, Options) -> Reply
         when
             FileNames :: file_names(),
             Output :: output(),
             Options :: options(),
             Reply :: ok | {error, reason()} | output_reply().

Merges terms on files. Each input file is assumed to be sorted.

-spec sort(FileName) -> Reply
        when
            FileName :: file_name(),
            Reply :: ok | {error, reason()} | input_reply() | output_reply().

Sorts terms on files.

-spec sort(Input, Output) -> Reply
        when
            Input :: input(),
            Output :: output(),
            Reply :: ok | {error, reason()} | input_reply() | output_reply().

Equivalent to sort(Input, Output, [])

Link to this function

sort(Input, Output, Options)

View Source
-spec sort(Input, Output, Options) -> Reply
        when
            Input :: input(),
            Output :: output(),
            Options :: options(),
            Reply :: ok | {error, reason()} | input_reply() | output_reply().

Sorts terms on files.