View Source slave (stdlib v6.0)

This module provides functions for starting Erlang slave nodes.

All slave nodes that are started by a master terminate automatically when the master terminates. All terminal output produced at the slave is sent back to the master node. File I/O is done through the master.

Slave nodes on other hosts than the current one are started with the ssh program. The user must be allowed to ssh to the remote hosts without being prompted for a password. This can be arranged in a number of ways (for details, see the ssh documentation). A slave node started on the same host as the master inherits certain environment values from the master, such as the current directory and the environment variables. For what can be assumed about the environment when a slave is started on another host, see the documentation for the ssh program.

An alternative to the ssh program can be specified on the command line to erl(1) as follows:

-rsh Program

Note that the command specified with the -rsh flag is treated as a file name which may contain spaces. It is thus not possible to include any command line options. The remote node will be launched as "$RSH" "$REMOTE_HOSTNAME" erl -detached -noinput ..., so the erl command must be found in the path on the remote host.

The slave node is to use the same file system at the master. At least, Erlang/OTP is to be installed in the same place on both computers and the same version of Erlang is to be used.

A node running on Windows can only start slave nodes on the host on which it is running.

The master node must be alive.

Summary

Functions

Calls pseudo(Master, ServerList). If you want to start a node from the command line and set up a number of pseudo servers, an Erlang runtime system can be started as follows

Starts a number of pseudo servers. A pseudo server is a server with a registered name that does nothing but pass on all message to the real server that executes at a master node. A pseudo server is an intermediary that only has the same registered name as the real server.

relay(Pid) deprecated

Runs a pseudo server. This function never returns any value and the process that executes the function receives messages. All messages received are simply passed on to Pid.

start(Host) deprecated

Equivalent to start(Host, Name) where Name is the same as the node that executes this call.

start(Host, Name) deprecated

Equivalent to start(Host, Name, []).

Starts a slave node on host Host. Host names need not necessarily be specified as fully qualified names; short names can also be used. This is the same condition that applies to names of distributed Erlang nodes.

start_link(Host) deprecated

Equivalent to start_link/3.

Equivalent to start_link/3.

Starts a slave node in the same way as start/1,2,3, except that the slave node is linked to the currently executing process. If that process terminates, the slave node also terminates.

stop(Node) deprecated

Stops (kills) a node.

Functions

Link to this function

pseudo([Master | ServerList])

View Source
This function is deprecated. slave:pseudo/1 is deprecated; use the 'peer' module instead.
-spec pseudo([Master :: node() | (ServerList :: [atom()])]) -> ok.

Calls pseudo(Master, ServerList). If you want to start a node from the command line and set up a number of pseudo servers, an Erlang runtime system can be started as follows:

% erl -name abc -s slave pseudo klacke@super x --
Link to this function

pseudo(Master, ServerList)

View Source
This function is deprecated. slave:pseudo/2 is deprecated; use the 'peer' module instead.
-spec pseudo(Master, ServerList) -> ok when Master :: node(), ServerList :: [atom()].

Starts a number of pseudo servers. A pseudo server is a server with a registered name that does nothing but pass on all message to the real server that executes at a master node. A pseudo server is an intermediary that only has the same registered name as the real server.

For example, if you have started a slave node N and want to execute pxw graphics code on this node, you can start server pxw_server as a pseudo server at the slave node. This is illustrated as follows:

rpc:call(N, slave, pseudo, [node(), [pxw_server]]).
This function is deprecated. slave:relay/1 is deprecated; use the 'peer' module instead.
-spec relay(Pid) -> no_return() when Pid :: pid().

Runs a pseudo server. This function never returns any value and the process that executes the function receives messages. All messages received are simply passed on to Pid.

This function is deprecated. slave:start/1 is deprecated; use the 'peer' module instead.
-spec start(Host) -> {ok, Node} | {error, Reason}
               when
                   Host :: inet:hostname(),
                   Node :: node(),
                   Reason :: timeout | no_rsh | {already_running, Node}.

Equivalent to start(Host, Name) where Name is the same as the node that executes this call.

This function is deprecated. slave:start/2 is deprecated; use the 'peer' module instead.
-spec start(Host, Name) -> {ok, Node} | {error, Reason}
               when
                   Host :: inet:hostname(),
                   Name :: atom() | string(),
                   Node :: node(),
                   Reason :: timeout | no_rsh | {already_running, Node}.

Equivalent to start(Host, Name, []).

This function is deprecated. slave:start/3 is deprecated; use the 'peer' module instead.
-spec start(Host, Name, Args) -> {ok, Node} | {error, Reason}
               when
                   Host :: inet:hostname(),
                   Name :: atom() | string(),
                   Args :: string(),
                   Node :: node(),
                   Reason :: timeout | no_rsh | {already_running, Node}.

Starts a slave node on host Host. Host names need not necessarily be specified as fully qualified names; short names can also be used. This is the same condition that applies to names of distributed Erlang nodes.

The name of the started node becomes Name@Host.

The slave node resets its io:user/0 process so that all terminal I/O that is produced at the slave is automatically relayed to the master. Also, the file server is relayed to the master.

Argument Args is used to set erl command-line arguments. It is passed to the new node and can be used for a variety of purposes; see erl(1).

As an example, suppose that you want to start a slave node at host H with node name Name@H and want the slave node to have the following properties:

  • Directory Dir is to be added to the code path.
  • The Mnesia directory is to be set to M.
  • The Unix DISPLAY environment variable is to be set to the display of the master node.

The following code is executed to achieve this:

E = " -env DISPLAY " ++ net_adm:localhost() ++ ":0 ",
Arg = "-mnesia_dir " ++ M ++ " -pa " ++ Dir ++ E,
slave:start(H, Name, Arg).

The function returns {ok, Node}, where Node is the name of the new node, otherwise {error, Reason}, where Reason can be one of:

  • timeout - The master node failed to get in contact with the slave node. This can occur in a number of circumstances:

    • Erlang/OTP is not installed on the remote host.
    • The file system on the other host has a different structure to the the master.
    • The Erlang nodes have different cookies.
  • no_rsh - No remote shell program was found on the computer. Note that ssh is used by default, but this can be overridden with the -rsh flag.

  • {already_running, Node} - A node with name Name@Host already exists.

This function is deprecated. slave:start_link/1 is deprecated; use the 'peer' module instead.
-spec start_link(Host) -> {ok, Node} | {error, Reason}
                    when
                        Host :: inet:hostname(),
                        Node :: node(),
                        Reason :: timeout | no_rsh | {already_running, Node}.

Equivalent to start_link/3.

This function is deprecated. slave:start_link/2 is deprecated; use the 'peer' module instead.
-spec start_link(Host, Name) -> {ok, Node} | {error, Reason}
                    when
                        Host :: inet:hostname(),
                        Name :: atom() | string(),
                        Node :: node(),
                        Reason :: timeout | no_rsh | {already_running, Node}.

Equivalent to start_link/3.

Link to this function

start_link(Host, Name, Args)

View Source
This function is deprecated. slave:start_link/3 is deprecated; use the 'peer' module instead.
-spec start_link(Host, Name, Args) -> {ok, Node} | {error, Reason}
                    when
                        Host :: inet:hostname(),
                        Name :: atom() | string(),
                        Args :: string(),
                        Node :: node(),
                        Reason :: timeout | no_rsh | {already_running, Node}.

Starts a slave node in the same way as start/1,2,3, except that the slave node is linked to the currently executing process. If that process terminates, the slave node also terminates.

For a description of arguments and return values, see start/1,2,3.

This function is deprecated. slave:stop/1 is deprecated; use the 'peer' module instead.
-spec stop(Node) -> ok when Node :: node().

Stops (kills) a node.