[erlang-questions] erlexec permissions denied error on start after building release

[Loïc Hoguin]

The steps I gave you earlier should have done it. Do it in the project 
where you build the release. Other erlang.mks don't matter.

On 07/02/2018 05:39 PM, Wes James wrote:
> I have been using cowboy 2.4.0.  I'm guessing cowboy master will pull 
> the correct one.
> 
> On Mon, Jul 2, 2018 at 9:37 AM, Wes James <comptekki@REDACTED 
> <mailto:comptekki@REDACTED>> wrote:
> 
>     .erlang.mk/relx <http://erlang.mk/relx> says 2.23.0.  Looking in
>     erlang.mk <http://erlang.mk>, it looked like it was pulling from
>     erlware/relx master.  How do I get it to pull 2.26.0?
> 
>     On Mon, Jul 2, 2018 at 9:06 AM, Loïc Hoguin <essen@REDACTED
>     <mailto:essen@REDACTED>> wrote:
> 
>         Yes but that issue is supposed to be resolved for both current
>         versions of rebar3 and erlang.mk <http://erlang.mk>.
> 
>         Try:
> 
>         $ ./.erlang.mk/relx <http://erlang.mk/relx> --version
>         3.26.0
> 
>         If you don't have this version, then your Relx is probably
>         outdated, maybe you have a specific version configured via
>         RELX_URL or are building it yourself in another way?
> 
>         If you do have this version then you probably have a genuine bug.
> 
>         Cheers,
> 
>         On 07/02/2018 05:01 PM, Wes James wrote:
> 
>             It looks like this issue has already been posted on github
>             (erlware/relx), issue #660.
> 
>             On Mon, Jul 2, 2018 at 8:32 AM, Wes James
>             <comptekki@REDACTED <mailto:comptekki@REDACTED>
>             <mailto:comptekki@REDACTED <mailto:comptekki@REDACTED>>>
>             wrote:
> 
>                  I tried that and erlexec, etc., are still rw instead of
>             rwx on
>                  centos 7.  I'll file a bug on the erlware/relx github repo.
> 
>                  Thanks,
> 
>                  -wes
> 
>                  On Sun, Jul 1, 2018 at 8:03 AM, Loïc Hoguin
>             <essen@REDACTED <mailto:essen@REDACTED>
>                  <mailto:essen@REDACTED
>             <mailto:essen@REDACTED>>> wrote:
> 
>                      Just update erlang.mk <http://erlang.mk>
>             <http://erlang.mk> and remove the cache
>                      and it'll work:
> 
>                      $ make erlang-mk
>                      $ make distclean    # or just rm -rf .erlang.mk
>             <http://erlang.mk>
>                      <http://erlang.mk> to go faster
>                      $ make
> 
>                      On 07/01/2018 12:27 AM, Wes James wrote:
> 
>                          I thought relx was just another name for
>             rebar.  I'm using
>             erlang.mk <http://erlang.mk> <http://erlang.mk>
>             <http://erlang.mk> and it has
>                          relx in the script.
> 
>                          I'm seeing these 2:
> 
>             https://github.com/erlang/rebar3
>             <https://github.com/erlang/rebar3>
>                          <https://github.com/erlang/rebar3
>             <https://github.com/erlang/rebar3>>
> 
>             https://github.com/erlware/relx
>             <https://github.com/erlware/relx>
>                          <https://github.com/erlware/relx
>             <https://github.com/erlware/relx>>
> 
>                          On Sat, Jun 30, 2018 at 4:20 PM, Wes James
>                          <comptekki@REDACTED
>             <mailto:comptekki@REDACTED> <mailto:comptekki@REDACTED
>             <mailto:comptekki@REDACTED>>
>                          <mailto:comptekki@REDACTED
>             <mailto:comptekki@REDACTED> <mailto:comptekki@REDACTED
>             <mailto:comptekki@REDACTED>>>>
>                          wrote:
> 
>                               I have 3.26.0.
> 
>                               On Sat, Jun 30, 2018 at 4:16 PM, Wes James
>                          <comptekki@REDACTED
>             <mailto:comptekki@REDACTED> <mailto:comptekki@REDACTED
>             <mailto:comptekki@REDACTED>>
>                               <mailto:comptekki@REDACTED
>             <mailto:comptekki@REDACTED>
>                          <mailto:comptekki@REDACTED
>             <mailto:comptekki@REDACTED>>>> wrote:
> 
>                                   OK.  I thought I got the latest
>             yesterday.  I'll
>                          check again.
> 
>                                   On Sat, Jun 30, 2018 at 4:14 PM,
>             Tristan Sloughter
>                                   <t@REDACTED
>             <mailto:t@REDACTED> <mailto:t@REDACTED
>             <mailto:t@REDACTED>>
>                          <mailto:t@REDACTED
>             <mailto:t@REDACTED> <mailto:t@REDACTED
>             <mailto:t@REDACTED>>>> wrote:
> 
>                                       __
>                                       This is with rebar3 3.6.1? Why is
>             it under
>                          `_rel`? Did you
>                                       set a different output directory
>             or are you
>                          using relx
>                                       directly? In which case make sure
>             you have
>                          version 3.26.0.
> 
>                                       Tristan
> 
>                                       On Sat, Jun 30, 2018, at 4:05 PM,
>             Wes James wrote:
> 
>                                           I upgraded to erlang 21.0.1
>             and upgraded
>                              rebar3 to the
>                                           latest and built my project,
>             but when I ran
>                              it I got an
>                                           erlexec permissions denied
>             error.  I
>                              noticed that most of
>                                           the files in
>                              _rel/project_name/erts-10.0.1/bin were set
>                                           only rw not rwx.  Is this a
>             bug or do I
>                              need to change a
>                                           setting somewhere?
> 
>                                           This is when I run: 
>             _rel/bin/project_name
>                              console
> 
>                                           Thanks,
> 
>                                           -wes
>                                                         
>             _________________________________________________
>                                           erlang-questions mailing list
>             erlang-questions@REDACTED <mailto:erlang-questions@REDACTED>
>                              <mailto:erlang-questions@REDACTED
>             <mailto:erlang-questions@REDACTED>>
>                                          
>             <mailto:erlang-questions@REDACTED
>             <mailto:erlang-questions@REDACTED>
>                              <mailto:erlang-questions@REDACTED
>             <mailto:erlang-questions@REDACTED>>>
>             http://erlang.org/mailman/listinfo/erlang-questions
>             <http://erlang.org/mailman/listinfo/erlang-questions>
>                             
>             <http://erlang.org/mailman/listinfo/erlang-questions
>             <http://erlang.org/mailman/listinfo/erlang-questions>>
>                                                         
>             <http://erlang.org/mailman/listinfo/erlang-questions
>             <http://erlang.org/mailman/listinfo/erlang-questions>
>                             
>             <http://erlang.org/mailman/listinfo/erlang-questions
>             <http://erlang.org/mailman/listinfo/erlang-questions>>>
> 
> 
> 
>                                      
>             _______________________________________________
>                                       erlang-questions mailing list
>             erlang-questions@REDACTED <mailto:erlang-questions@REDACTED>
>                          <mailto:erlang-questions@REDACTED
>             <mailto:erlang-questions@REDACTED>>
>                          <mailto:erlang-questions@REDACTED
>             <mailto:erlang-questions@REDACTED>
>                          <mailto:erlang-questions@REDACTED
>             <mailto:erlang-questions@REDACTED>>>
>             http://erlang.org/mailman/listinfo/erlang-questions
>             <http://erlang.org/mailman/listinfo/erlang-questions>
>                         
>             <http://erlang.org/mailman/listinfo/erlang-questions
>             <http://erlang.org/mailman/listinfo/erlang-questions>>
>                                                 
>             <http://erlang.org/mailman/listinfo/erlang-questions
>             <http://erlang.org/mailman/listinfo/erlang-questions>
>                         
>             <http://erlang.org/mailman/listinfo/erlang-questions
>             <http://erlang.org/mailman/listinfo/erlang-questions>>>
> 
> 
> 
> 
> 
> 
>                          _______________________________________________
>                          erlang-questions mailing list
>             erlang-questions@REDACTED
>             <mailto:erlang-questions@REDACTED>
>             <mailto:erlang-questions@REDACTED
>             <mailto:erlang-questions@REDACTED>>
>             http://erlang.org/mailman/listinfo/erlang-questions
>             <http://erlang.org/mailman/listinfo/erlang-questions>
>                         
>             <http://erlang.org/mailman/listinfo/erlang-questions
>             <http://erlang.org/mailman/listinfo/erlang-questions>>
> 
> 
>                      --         Loïc Hoguin
>             https://ninenines.eu
> 
> 
> 
> 
>         -- 
>         Loïc Hoguin
>         https://ninenines.eu
> 
> 
> 

-- 
Loïc Hoguin
https://ninenines.eu