[erlang-questions] Yaws, ErlyWeb and Windows.
Ghalib Suleiman
ghalib@REDACTED
Fri Sep 14 13:15:44 CEST 2007
Hi Bob, Erlyweb does indeed have a bug on Windows where it doesn't
seem to be registering components properly (I ran into this last week
myself), thus making it unusable. There's a slight discussion about
it on the Erlyweb Google Group - I plan to hunt down the bug when I'm
back at work tomorrow, as I don't have access to a Windows machine at
home.
-Ghalib
On Sep 13, 2007, at 11:00 AM, Bob Cowdery wrote:
> Robert
>
> Thanks very much for that. I will have a go when I'm out the woods.
> At the moment the pre-built version is working ok.
>
> However, I wonder, do you use ErlyWeb because I'm having trouble
> with it. I posted a message on the forum yesterday but no replies
> yet. Essentially I can't get it to generate code for a MySQL table
> and it can't seem to find the controller that it generated anyway.
> In fact it dosn't seem think they are controllers and views.
>
> Any help appreciated.
>
> Bob
>
> -----Original Message-----
> From: erlang-questions-bounces@REDACTED
> [mailto:erlang-questions-bounces@REDACTED]On Behalf Of Robert
> Raschke
> Sent: 11 September 2007 10:36
> To: erlang-questions@REDACTED
> Subject: Re: [erlang-questions] Yaws, ErlyWeb and Windows.
>
>
>> Bob Cowdery wrote:
>>> Hi All
>>>
>>> Can someone give me the picture on Yaws and ErlyWeb under Windows
>>> please
>>
>> I'm sorry about that - to my knowledge there is quite a lot
>> of people running yaws under windows. I don't run windows at
>> all any longer - and I'll just have to leave it up to the
>> yaws/windows community to write e.g. a proper wiki entry on how to do
>> it. I know for sure that it atleast used to work - I made sure it
>> worked once, but it might have gone bad.
>
> Here's how I build yaws on Windows:
>
> My source root is $ROOT.
> Unpack yaws-1.68 into $ROOT/lib/yaws.
> Have a folder called $ROOT/extra with the files yaws_generated.erl and
> yaws.app (although I forget why I need yaws.app):
>
> yaws_generated.erl:
> %%
> %---------------------------------------------------------------------
> -
> %%% File : yaws_generated.template
> %%% Author : Klacke <klacke@REDACTED>
> %%% Purpose :
> %%% Created : 10 Jun 2002 by Klacke <klacke@REDACTED>
> %%
> %---------------------------------------------------------------------
> -
>
> %% generated code from some environment variables
> %% especially VARDIR is important since it controls
> %% where the --hup and friends
>
> -module(yaws_generated).
> -author('klacke@REDACTED').
>
> -compile(export_all).
>
> version() -> "1.68".
>
> vardir() -> "C:/yaws/var".
>
> ctldir() -> "C:/yaws/var/run/yaws".
>
> etcdir() -> "C:/yaws/etc".
>
> % (Or whatever you want your defaults to be.)
>
> yaws.app:
> {application, yaws, [
> {description, "yaws WWW server"},
> {vsn, "1.68"},
> {modules, [
> yaws,
> yaws_app,
> yaws_ticker,
> yaws_config,
> yaws_server,
> yaws_sup,
> yaws_api,
> yaws_log,
> yaws_ls,
> yaws_debug,
> yaws_compile,
> yaws_ctl,
> yaws_cgi,
> yaws_zlib,
> yaws_generated,
> mime_type_c,
> mime_types,
> yaws_session_server,
> yaws_404,
> yaws_revproxy,
> yaws_html,
> yaws_log_file_h,
> yaws_rss,
> yaws_dav,
> yaws_pam,
> json,
> jsonrpc,
> yaws_jsonrpc,
> yaws_xmlrpc,
> haxe,
> yaws_rpc,
> yaws_soap_srv,
> yaws_soap_lib
> ]},
> {registered, []},
> {mod, {yaws_app, []}},
> {env, []},
> {applications, [
> kernel,
> stdlib
> ]}
> ]}.
>
> And then I run this batch script:
>
> build_yaws.bat:
> @echo off
> setlocal
>
> copy /Y extra\yaws_generated.erl lib\yaws\src
> cd lib\yaws\src
>
> set ERLC="C:\Program Files\erl5.5.4\bin\erlc"
> set ERL="C:\Program Files\erl5.5.4\bin\erl"
>
> set ERLCOPTS=-W -pa .. -I../include -o ../ebin
> set ERLOPTS=-noshell -pa ../ebin
>
>
> %ERLC% %ERLCOPTS% yaws.erl
> %ERLC% %ERLCOPTS% yaws_app.erl
> %ERLC% %ERLCOPTS% yaws_ticker.erl
> %ERLC% %ERLCOPTS% yaws_config.erl
> %ERLC% %ERLCOPTS% yaws_server.erl
> %ERLC% %ERLCOPTS% yaws_sup.erl
> %ERLC% %ERLCOPTS% yaws_api.erl
> %ERLC% %ERLCOPTS% yaws_log.erl
> %ERLC% %ERLCOPTS% yaws_ls.erl
> %ERLC% %ERLCOPTS% yaws_debug.erl
> %ERLC% %ERLCOPTS% yaws_compile.erl
> %ERLC% %ERLCOPTS% yaws_ctl.erl
> %ERLC% %ERLCOPTS% yaws_cgi.erl
> %ERLC% %ERLCOPTS% yaws_zlib.erl
> %ERLC% %ERLCOPTS% yaws_generated.erl
> %ERLC% %ERLCOPTS% yaws_session_server.erl
> %ERLC% %ERLCOPTS% yaws_404.erl
> %ERLC% %ERLCOPTS% yaws_revproxy.erl
> %ERLC% %ERLCOPTS% yaws_html.erl
> %ERLC% %ERLCOPTS% yaws_log_file_h.erl
> %ERLC% %ERLCOPTS% yaws_rss.erl
> %ERLC% %ERLCOPTS% yaws_dav.erl
> %ERLC% %ERLCOPTS% yaws_pam.erl
> %ERLC% %ERLCOPTS% json.erl
> %ERLC% %ERLCOPTS% jsonrpc.erl
> %ERLC% %ERLCOPTS% yaws_jsonrpc.erl
> %ERLC% %ERLCOPTS% yaws_xmlrpc.erl
> %ERLC% %ERLCOPTS% haxe.erl
> %ERLC% %ERLCOPTS% yaws_rpc.erl
> %ERLC% %ERLCOPTS% yaws_soap_srv.erl
> %ERLC% %ERLCOPTS% yaws_soap_lib.erl
>
> del /F charset.def
> echo. > charset.def
>
> %ERLC% %ERLCOPTS% mime_type_c.erl
> %ERL% %ERLOPTS% -s mime_type_c compile
> %ERLC% %ERLCOPTS% mime_types.erl
>
> pause
> endlocal
>
>
> I have also made a small attempt at writing a yaws.bat file, but I
> haven't used this in a few years:
>
> @echo off
> setlocal
>
> set HOME=C:/yaws
> set yawsdir=C:/yaws/erlang/yaws-1.68
>
> set erl=C:\Program Files\erl5.5.4\bin\erl.exe
> set werl=C:\Program Files\erl5.5.4\bin\werl.exe
>
> set debug=
> set daemon=
> set interactive=
> set trace=
> set conf=
> set runmod=
> set sname=
> set heart=
> set xpath=
> set mnesia=
> set id=default
> set pdist=
> set erlarg=
>
> :NEXTARG
> set arg=%1
> shift
> if "%arg%"=="" goto ENDARGS
>
> if "%arg%"=="-i" goto INTERACT
> if "%arg%"=="--interactive" goto INTERACT
>
> if "%arg%"=="-w" goto WINTERACT
> if "%arg%"=="--winteractive" goto WINTERACT
>
> if "%arg%"=="-D" goto DAEMON
> if "%arg%"=="--daemon" goto DAEMON
>
> if "%arg%"=="-d" goto DEBUG
> if "%arg%"=="--debug" goto DEBUG
>
> if "%arg%"=="-t" goto TRACETR
> if "%arg%"=="--tracetraf" goto TRACETR
>
> if "%arg%"=="-T" goto TRACEHT
> if "%arg%"=="--tracehttp" goto TRACEHT
>
> if "%arg%"=="-I" goto ID
> if "%arg%"=="--id" goto ID
>
> if "%arg%"=="-x" goto TRACEOUT
> if "%arg%"=="--traceout" goto TRACEOUT
>
> if "%arg%"=="--trace" goto TRACE
>
> if "%arg%"=="-M" goto MNESIADIR
> if "%arg%"=="--mnesiadir" goto MNESIADIR
>
> if "%arg%"=="-c" goto CONF
> if "%arg%"=="--conf" goto CONF
>
> if "%arg%"=="-pa" goto PA
> if "%arg%"=="--pa" goto PA
>
> if "%arg%"=="-r" goto RUNMOD
> if "%arg%"=="--runmod" goto RUNMOD
>
> if "%arg%"=="-h" goto HUP
> if "%arg%"=="--hup" goto HUP
>
> if "%arg%"=="-s" goto STOP
> if "%arg%"=="--stop" goto STOP
>
> if "%arg%"=="-ls" goto LS
> if "%arg%"=="--ls" goto LS
>
> if "%arg%"=="-S" goto STATUS
> if "%arg%"=="--status" goto STATUS
>
> if "%arg%"=="-load" goto LOAD
> if "%arg%"=="--load" goto LOAD
>
> if "%arg%"=="-j" goto CTLTRACE
> if "%arg%"=="--ctltrace" goto CTLTRACE
>
> if "%arg%"=="-v" goto VERSION
> if "%arg%"=="--version" goto VERSION
>
> if "%arg%"=="-sname" goto SNAME
> if "%arg%"=="--sname" goto SNAME
>
> if "%arg%"=="-name" goto NAME
> if "%arg%"=="--name" goto NAME
>
> if "%arg%"=="-heart" goto HEART
> if "%arg%"=="--heart" goto HEART
>
> if "%arg%"=="-proto_dist" goto PROTO
> if "%arg%"=="--proto_dist" goto PROTO
>
> if "%arg%"=="-erlarg" goto ERLARG
> if "%arg%"=="--erlarg" goto ERLARG
>
> if "%arg%"=="-check" goto CHECK
> if "%arg%"=="--check" goto CHECK
>
> goto HELP
>
> :INTERACT
> set interactive=true
> set debug= -yaws debug
> set daemon=
> goto NEXTARG
>
> :WINTERACT
> set interactive=true
> set debug= -yaws debug
> set daemon=
> set erl=%werl%
> goto NEXTARG
>
> :DAEMON
> set daemon= -detached
> goto NEXTARG
>
> :DEBUG
> set debug= -boot start_sasl -yaws debug
> goto NEXTARG
>
> :TRACETR
> set trace= -yaws trace traffic
> goto NEXTARG
>
> :TRACEHT
> set trace= -yaws trace http
> goto NEXTARG
>
> :ID
> set id=%1
> shift
> goto NEXTARG
>
> :TRACEOUT
> set traceoutput= -yaws traceoutput
> goto NEXTARG
>
> :TRACE
> set traceoutput= -yaws traceoutput
> set trace= -yaws trace traffic
> goto NEXTARG
>
> :MNESIADIR
> set mnesia= -mnesia dir %1 -run mnesia start
> shift
> goto NEXTARG
>
> :CONF
> set conf= -conf %1
> shift
> goto NEXTARG
>
> :PA
> set xpath= %xpath% -pa %1
> shift
> goto NEXTARG
>
> :RUNMOD
> set runmod= -runmod %1
> shift
> goto NEXTARG
>
> :HUP
> set ex="%erl%" -noshell -pa "%yawsdir%/ebin" -s yaws_ctl hup
> goto NEXTARG
>
> :STOP
> set ex="%erl%" -noshell -pa "%yawsdir%/ebin" -s yaws_ctl stop
> goto NEXTARG
>
> :LS
> set ex="%erl%" -noshell -pa "%yawsdir%/ebin" -s yaws_ctl ls
> goto NEXTARG
>
> :STATUS
> set ex="%erl%" -noshell -pa "%yawsdir%/ebin" -s yaws_ctl status
> goto NEXTARG
>
> :LOAD
> "%erl%" -noshell -pa "%yawsdir%/ebin" -s yaws_ctl load %id% %1 %2 %
> 3 %4 %5 %6 %7 %8 %9
> goto END
>
> :CTLTRACE
> set ex="%erl%" -noshell -pa "%yawsdir%/ebin" -s yaws_ctl trace %1
> shift
> goto NEXTARG
>
> :VERSION
> "%erl%" -noshell -pa "%yawsdir%/ebin" -s yaws printversion
> goto END
>
> :SNAME
> set sname= -sname %1
> shift
> goto NEXTARG
>
> :NAME
> set sname= -name %1
> shift
> goto NEXTARG
>
> :HEART
> set heart= -heart
> goto NEXTARG
>
> :PROTO
> set pdist= -proto_dist %1
> shift
> goto NEXTARG
>
> :ERLARG
> set erlarg=%erlarg% %1
> shift
> goto NEXTARG
>
> :CHECK
> mkdir "%HOME%/.yaws/"
> mkdir "%HOME%/.yaws/%id%"
> "%erl%" -noshell -pa "%yawsdir%/ebin" %xpath% -s yaws_ctl check %id
> % %1 %2 %3 %4 %5 %6 %7 %8 %9
> goto END
>
> :ENDARGS
>
> if NOT DEFINED ex goto NOEX
> %ex% %id%
> goto END
> :NOEX
>
> if "%id%"=="" goto NOID
> set id=-yaws id %id%
> :NOID
>
> set trace=%trace% %traceoutput%
>
> if "%daemon%%interactive%"=="" goto HELP
>
> set XEC=%daemon% %heart% -pa "%yawsdir%/ebin" %xpath% %sname% %pdist
> % %erlarg% %debug% -s yaws %trace% %conf% %runmod% %mnesia% %id%
>
> set HEART_COMMAND=
> if "%heart%%daemon%"=="" goto NOHEART
> echo set HEART_COMMAND="%erl%" %XEC%
> set HEART_COMMAND="%erl%" %XEC%
>
> :NOHEART
> echo "%erl%" %XEC%
> "%erl%" %XEC%
> goto END
>
> :HELP
> echo "usage: "
> echo ""
>
> echo " yaws -i | --interactive -- interactive (no
> daemon) mode"
> echo " yaws -w | --winteractive -- interactive (werl) "
> echo " yaws --daemon -- daemon mode"
>
> echo ""
>
> echo ""
> echo " Auxilliary flags for the daemon: "
> echo " --id Id -- Set system id"
> echo " --debug -- debug mode "
> echo " --conf File -- set config file"
> echo " --tracetraf -- trace traffic"
> echo " --tracehttp -- trace http traffic"
> echo " --traceout -- trace output to stdout"
> echo " --version -- print version"
> echo " --pa path -- add load path"
> echo " --mnesiadir dir -- start Mnesia in dir"
> echo " --proto_dist Mod -- use Mod for distrib"
> echo " --sname xxx -- start with sname xxx"
> echo " --name xxx -- start with name xxx"
> echo " --runmod mod -- call mod:start/0 at startup"
> echo " --heart -- auto restart yaws if it
> crashes"
> echo " --erlarg X -- pass argument X to $erl"
>
> echo ""
>
> echo "ctl functions ... "
> echo " yaws --hup [--id ID] -- hup the daemon, reload
> conf"
> echo " yaws --stop [--id ID] -- stop the daemon"
> echo " yaws --status [--id ID] -- query the daemon status"
> echo " yaws --load Modules -- load modules"
> echo " yaws --ls -- list Yaws nodes and
> their status"
> echo " yaws --ctltrace traffic|http -- toggle trace of
> running daemon"
> echo " yaws --check YawsFile [IncDirs] -- test compile File"
>
> :END
> endlocal
>
>
>
> Robby
>
> --
> r fullstop raschke around tombob fullstop com
>
>
> _______________________________________________
> erlang-questions mailing list
> erlang-questions@REDACTED
> http://www.erlang.org/mailman/listinfo/erlang-questions
> _______________________________________________
> erlang-questions mailing list
> erlang-questions@REDACTED
> http://www.erlang.org/mailman/listinfo/erlang-questions
More information about the erlang-questions
mailing list