11 Release Handling
11.1 Release Handling Principles
An important feature of the Erlang programming language is
the ability to change module code in run-time, code replacement, as described in Erlang Reference Manual.
Based on this feature, the OTP application SASL provides a
framework for upgrading and downgrading between different
versions of an entire release in run-time. This is what we call
release handling.
The framework consists of off-line support (systools) for
generating scripts and building release packages, and on-line
support (release_handler) for unpacking and installing
release packages.
Note that the minimal system based on Erlang/OTP, enabling
release handling, thus consists of Kernel, STDLIB and SASL.
-
A release is created as described in the previous chapter
Releases.
The release is transferred to and installed at target
environment. Refer to System Principles for
information of how to install the first target system.
-
Modifications, for example error corrections, are made to
the code in the development environment.
-
At some point it is time to make a new version of release.
The relevant .app files are updated and a new
.rel file is written.
-
For each modified application, an
application upgrade file,
.appup, is created. In this file, it is described how
to upgrade and/or downgrade between the old and new version of
the application.
-
Based on the .appup files, a
release upgrade file called
relup, is created. This file describes how to upgrade
and/or downgrade between the old and new version of
the entire release.
-
A new release package is made and transferred to
the target system.
-
The new release package is unpacked using the release
handler.
-
The new version of the release is installed, also using
the release handler. This is done by evaluating
the instructions in relup. Modules may be added,
deleted or re-loaded, applications may be started, stopped or
re-started etc. In some cases, it is even necessary to restart
the entire emulator.
If the installation fails, the system may be rebooted.
The old release version is then automatically used.
-
If the installation succeeds, the new version is made
the default version, which should now be used in case of a
system reboot.
The next chapter, Appup Cookbook, contains examples of .appup files
for typical cases of upgrades/downgrades that are normally easy
to handle in run-time. However, there are a many aspects that can
make release handling complicated. To name a few examples:
-
Complicated or circular dependencies can make it difficult
or even impossible to decide in which order things must be
done without risking run-time errors during an upgrade or
downgrade. Dependencies may be:
-
between nodes,
-
between processes, and
-
between modules.
-
During release handling, non-affected processes continue
normal execution. This may lead to timeouts or other problems.
For example, new processes created in the time window between
suspending processes using a certain module and loading a new
version of this module, may execute old code.
It is therefore recommended that code is changed in as small
steps as possible, and always kept backwards compatible.
11.2 Requirements
For release handling to work properly, the runtime system needs
to have knowledge about which release it is currently running. It
must also be able to change (in run-time) which boot script and
system configuration file should be used if the system is
rebooted, for example by heart after a failure.
Therefore, Erlang must be started as an embedded system, see
Embedded System for information on how to do this.
For system reboots to work properly, it is also required that
the system is started with heart beat monitoring, see
erl(1) and heart(3).
Other requirements:
-
The boot script included in a release package must be
generated from the same .rel file as the release
package itself.
Information about applications are fetched from the script
when an upgrade or downgrade is performed.
-
The system must be configured using one and only one system
configuration file, called sys.config.
If found, this file is automatically included when a release
package is created.
-
All versions of a release, except the first one, must
contain a relup file.
If found, this file is automatically included when a release
package is created.
11.3 Distributed Systems
If the system consists of several Erlang nodes, each node may use
its own version of the release. The release handler is a locally
registered process and must be called at each node where an
upgrade or downgrade is required. There is a release handling
instruction that can be used to synchronize the release handler
processes at a number of nodes: sync_nodes. See
appup(4).
11.4 Release Handling Instructions
OTP supports a set of release handling instructions
that is used when creating .appup files. The release
handler understands a subset of these, the low-level
instructions. To make it easier for the user, there are also a
number of high-level instructions, which are translated
to low-level instructions by systools:make_relup.
Here, some of the most frequently used instructions are
described. The complete list of instructions is found in
appup(4).
First, some definitions:
-
Residence module
-
The module where a process has its tail-recursive loop
function(s). If the tail-recursive loop functions are
implemented in several modules, all those modules are residence
modules for the process.
-
Functional module
-
A module which is not a residence module for any process.
Note that for a process implemented using an OTP behaviour,
the behaviour module is the residence module for that process.
The callback module is a functional module.
11.4.1 load_module
If a simple extension has been made to a functional module, it
is sufficient to simply load the new version of the module into
the system, and remove the old version. This is called
simple code replacement and for this the following
instruction is used:
11.4.2 update
If a more complex change has been made, for example a change
to the format of the internal state of a gen_server, simple code
replacement is not sufficient. Instead it is necessary to
suspend the processes using the module (to avoid that they try
to handle any requests before the code replacement is
completed), ask them to transform the internal state format and
switch to the new version of the module, remove the old version
and last, resume the processes. This is called synchronized code replacement and for this the following instructions
are used:
{update, Module, {advanced, Extra}}
{update, Module, supervisor}
update with argument {advanced,Extra} is used
when changing the internal state of a behaviour as described
above. It will cause behaviour processes to call the callback
function code_change, passing the term Extra and
some other information as arguments. See the man pages for
the respective behaviours and
Appup Cookbook.
update with argument supervisor is used when
changing the start specification of a supervisor. See
Appup Cookbook.
The release handler finds the processes using a module
to update by traversing the supervision tree of each running
application and checking all the child specifications:
{Id, StartFunc, Restart, Shutdown, Type, Modules}
A process is using a module if the name is listed in
Modules in the child specification for the process.
If Modules=dynamic, which is the case for event
managers, the event manager process informs the release handler
about the list of currently installed event handlers (gen_fsm)
and it is checked if the module name is in this list instead.
The release handler suspends, asks for code change, and
resumes processes by calling the functions
sys:suspend/1,2, sys:change_code/4,5 and
sys:resume/1,2 respectively.
11.4.3 add_module and delete_module
If a new module is introduced, the following instruction is
used:
The instruction loads the module and is absolutely necessary
when running Erlang in embedded mode. It is not strictly
required when running Erlang in interactive (default) mode,
since the code server automatically searches for and loads
unloaded modules.
The opposite of add_module is delete_module which
unloads a module:
Note that any process, in any application, with Module
as residence module, is killed when the instruction is
evaluated. The user should therefore ensure that all such
processes are terminated before deleting the module, to avoid
a possible situation with failing supervisor restarts.
11.4.4 Application Instructions
Instruction for adding an application:
{add_application, Application}
Adding an application means that the modules defined by
the modules key in the .app file are loaded using
a number of add_module instructions, then the application
is started.
Instruction for removing an application:
{remove_application, Application}
Removing an application means that the application is stopped,
the modules are unloaded using a number of delete_module
instructions and then the application specification is unloaded
from the application controller.
Instruction for removing an application:
{restart_application, Application}
Restarting an application means that the application is stopped
and then started again similar to using the instructions
remove_application and add_application in
sequence.
11.4.5 apply (low-level)
To call an arbitrary function from the release handler,
the following instruction is used:
The release handler will evalute apply(M, F, A).
11.4.6 restart_new_emulator (low-level)
This instruction is used when changing to a new emulator
version, or if a system reboot is needed for some other reason.
Requires that the system is started with heart beat
monitoring, see erl(1) and heart(3).
When the release handler encounters the instruction, it shuts
down the current emulator by calling init:reboot(), see
init(3). All processes are terminated gracefully and
the system can then be rebooted by the heart program, using
the new release version. This new version must still be made
permanent when the new emulator is up and running. Otherwise,
the old version is used in case of a new system reboot.
On UNIX, the release handler tells the heart program which
command to use to reboot the system. Note that the environment
variable HEART_COMMAND, normally used by the heart
program, in this case is ignored. The command instead defaults
to $ROOT/bin/start. Another command can be set
by using the SASL configuration parameter start_prg, see
sasl(6).
11.5 Application Upgrade File
To define how to upgrade/downgrade between the current version
and previous versions of an application, we create an
application upgrade file, or in short .appup file.
The file should be called Application.appup, where
Application is the name of the application:
{Vsn,
[{UpFromVsn1, InstructionsU1},
...,
{UpFromVsnK, InstructionsUK}],
[{DownToVsn1, InstructionsD1},
...,
{DownToVsnK, InstructionsDK}]}.
Vsn, a string, is the current version of the application,
as defined in the .app file. Each UpFromVsn
is a previous version of the application to upgrade from, and each
DownToVsn is a previous version of the application to
downgrade to. Each Instructions is a list of release
handling instructions.
The syntax and contents of the appup file are described
in detail in appup(4).
In the chapter Appup Cookbook, examples of .appup files for typical
upgrade/downgrade cases are given.
Example: Consider the release ch_rel-1 from
the Releases
chapter. Assume we want to add a function available/0 to
the server ch3 which returns the number of available
channels:
(Hint: When trying out the example, make the changes in a copy of
the original directory, so that the first versions are still
available.)
-module(ch3).
-behaviour(gen_server).
-export([start_link/0]).
-export([alloc/0, free/1]).
-export([available/0]).
-export([init/1, handle_call/3, handle_cast/2]).
start_link() ->
gen_server:start_link({local, ch3}, ch3, [], []).
alloc() ->
gen_server:call(ch3, alloc).
free(Ch) ->
gen_server:cast(ch3, {free, Ch}).
available() ->
gen_server:call(ch3, available).
init(_Args) ->
{ok, channels()}.
handle_call(alloc, _From, Chs) ->
{Ch, Chs2} = alloc(Chs),
{reply, Ch, Chs2};
handle_call(available, _From, Chs) ->
N = available(Chs),
{reply, N, Chs}.
handle_cast({free, Ch}, Chs) ->
Chs2 = free(Ch, Chs),
{noreply, Chs2}.
A new version of the ch_app.app file must now be created,
where the version is updated:
{application, ch_app,
[{description, "Channel allocator"},
{vsn, "2"},
{modules, [ch_app, ch_sup, ch3]},
{registered, [ch3]},
{applications, [kernel, stdlib, sasl]},
{mod, {ch_app,[]}}
]}.
To upgrade ch_app from "1" to "2" (and
to downgrade from "2" to "1"), we simply need to
load the new (old) version of the ch3 callback module.
We create the application upgrade file ch_app.appup in
the ebin directory:
{"2",
[{"1", [{load_module, ch3}]}],
[{"1", [{load_module, ch3}]}]
}.
11.6 Release Upgrade File
To define how to upgrade/downgrade between the new version and
previous versions of a release, we create a release upgrade file, or in short relup file.
This file does not need to be created manually, it can be
generated by systools:make_relup/3,4. The relevant versions
of the .rel file, .app files and .appup files
are used as input. It is deducted which applications should be
added and deleted, and which applications that need to be upgraded
and/or downgraded. The instructions for this is fetched from
the .appup files and transformed into a single list of
low-level instructions in the right order.
If the relup file is relatively simple, it can be created
manually. Remember that it should only contain low-level
instructions.
The syntax and contents of the release upgrade file are
described in detail in relup(4).
Example, continued from the previous section. We have a new
version "2" of ch_app and an .appup file. We also
need a new version of the .rel file. This time the file is
called ch_rel-2.rel and the release version string is
changed changed from "A" to "B":
{release,
{"ch_rel", "B"},
{erts, "5.3"},
[{kernel, "2.9"},
{stdlib, "1.12"},
{sasl, "1.10"},
{ch_app, "2"}]
}.
Now the relup file can be generated:
1> systools:make_relup("ch_rel-2", ["ch_rel-1"], ["ch_rel-1"]).
ok
This will generate a relup file with instructions for
how to upgrade from version "A" ("ch_rel-1") to version "B"
("ch_rel-2") and how to downgrade from version "B" to version "A".
Note that both the old and new versions of the .app and
.rel files must be in the code path, as well as
the .appup and (new) .beam files. It is possible
to extend the code path by using the option path:
1> systools:make_relup("ch_rel-2", ["ch_rel-1"], ["ch_rel-1"],
[{path,["../ch_rel-1",
"../ch_rel-1/lib/ch_app-1/ebin"]}]).
ok
11.7 Installing a Release
When we have made a new version of a release, a release package
can be created with this new version and transferred to the target
environment.
To install the new version of the release in run-time,
the release handler is used. This is a process belonging
to the SASL application, that handles unpacking, installation,
and removal of release packages. It is interfaced through
the module release_handler, which is described in detail in
release_handler(3).
Assuming there is a target system up and running with
installation root directory $ROOT, the release package with
the new version of the release should be copied to
$ROOT/releases.
The first action is to unpack the release package,
the files are then extracted from the package:
release_handler:unpack_release(ReleaseName) => {ok, Vsn}
ReleaseName is the name of the release package except
the .tar.gz extension. Vsn is the version of
the unpacked release, as defined in its .rel file.
A directory $ROOT/lib/releases/Vsn will be created, where
the .rel file, the boot script start.boot,
the system configuration file sys.config and relup
are placed. For applications with new version numbers,
the application directories will be placed under $ROOT/lib.
Unchanged applications are not affected.
An unpacked release can be installed. The release
handler then evaluates the instructions in relup, step by
step:
release_handler:install_release(Vsn) => {ok, FromVsn, []}
If an error occurs during the installation, the system is
rebooted using the old version of the release. If installation
succeeds, the system is afterwards using the new version of
the release, but should anything happen and the system is
rebooted, it would start using the previous version again. To be
made the default version, the newly installed release must be made
permanent, which means the previous version becomes
old:
release_handler:make_permanent(Vsn) => ok
The system keeps information about which versions are old and
permanent in the files $ROOT/releases/RELEASES and
$ROOT/releases/start_erl.data.
To downgrade from Vsn to FromVsn,
install_release must be called again:
release_handler:install_release(FromVsn) => {ok, Vsn, []}
An installed, but not permanent, release can be removed.
Information about the release is then deleted from
$ROOT/releases/RELEASES and the release specific code,
that is the new application directories and
the $ROOT/releases/Vsn directory, are removed.
release_handler:remove_release(Vsn) => ok
Example, continued from the previous sections:
1) Create a target system as described in System Principles of the first version "A" of ch_rel
from
the Releases
chapter. This time sys.config must be included in
the release package. If no configuration is needed, the file
should contain the empty list:
2) Start the system as a simple target system. Note that in
reality, it should be started as an embedded system. However,
using erl with the correct boot script and .config
file is enough for illustration purposes:
% cd $ROOT
% bin/erl -boot $ROOT/releases/A/start -config $ROOT/releases/A/sys
...
$ROOT is the installation directory of the target system.
3) In another Erlang shell, generate start scripts and create a
release package for the new version "B". Remember to
include (a possible updated) sys.config and
the relup file, see Release Upgrade File above.
1> systools:make_script("ch_rel-2").
ok
2> systools:make_tar("ch_rel-2").
ok
The new release package now contains version "2" of ch_app
and the relup file as well:
% tar tf ch_rel-2.tar
lib/kernel-2.9/ebin/kernel.app
lib/kernel-2.9/ebin/application.beam
...
lib/stdlib-1.12/ebin/stdlib.app
lib/stdlib-1.12/ebin/beam_lib.beam
...
lib/sasl-1.10/ebin/sasl.app
lib/sasl-1.10/ebin/sasl.beam
...
lib/ch_app-2/ebin/ch_app.app
lib/ch_app-2/ebin/ch_app.beam
lib/ch_app-2/ebin/ch_sup.beam
lib/ch_app-2/ebin/ch3.beam
releases/B/start.boot
releases/B/relup
releases/B/sys.config
releases/ch_rel-2.rel
4) Copy the release package ch_rel-2.tar.gz to
the $ROOT/releases directory.
5) In the running target system, unpack the release package:
1> release_handler:unpack_release("ch_rel-2").
{ok,"B"}
The new application version ch_app-2 is installed under
$ROOT/lib next to ch_app-1. The kernel,
stdlib and sasl directories are not affected, as
they have not changed.
Under $ROOT/releases, a new directory B is created,
containing ch_rel-2.rel, start.boot,
sys.config and relup.
6) Check if the function ch3:available/0 is available:
2> ch3:available().
** exception error: undefined function ch3:available/0
7) Install the new release. The instructions in
$ROOT/releases/B/relup are executed one by one, resulting
in the new version of ch3 being loaded. The function
ch3:available/0 is now available:
3> release_handler:install_release("B").
{ok,"A",[]}
4> ch3:available().
3
5> code:which(ch3).
".../lib/ch_app-2/ebin/ch3.beam"
6> code:which(ch_sup).
".../lib/ch_app-1/ebin/ch_sup.beam"
Note that processes in ch_app for which code have not
been updated, for example the supervisor, are still evaluating
code from ch_app-1.
8) If the target system is now rebooted, it will use version "A"
again. The "B" version must be made permanent, in order to be
used when the system is rebooted.
7> release_handler:make_permanent("B").
ok
11.8 Updating Application Specifications
When a new version of a release is installed, the application
specifications are automatically updated for all loaded
applications.
Note
The information about the new application specifications are
fetched from the boot script included in the release package.
It is therefore important that the boot script is generated from
the same .rel file as is used to build the release
package itself.
Specifically, the application configuration parameters are
automatically updated according to (in increasing priority
order):
-
The data in the boot script, fetched from the new
application resource file App.app
-
The new sys.config
-
Command line arguments -App Par Val
This means that parameter values set in the other system
configuration files, as well as values set using
application:set_env/3, are disregarded.
When an installed release is made permanent, the system process
init is set to point out the new sys.config.
After the installation, the application controller will compare
the old and new configuration parameters for all running
applications and call the callback function:
Module:config_change(Changed, New, Removed)
Module is the application callback module as defined by
the mod key in the .app file. Changed and
New are lists of {Par,Val} for all changed and
added configuration parameters, respectively. Removed is
a list of all parameters Par that have been removed.
The function is optional and may be omitted when implementing an
application callback module.
Copyright © 1991-2009
Ericsson AB