[Ericsson AB]

test_server

MODULE

test_server

MODULE SUMMARY

This module provides support for test suite authors.

DESCRIPTION

The test_server module aids the test suite author by providing various support functions. The supported functionality includes:

For more information on how to write test cases and for examples, please see the Test Server User's Guide.

TEST SUITE SUPPORT FUNCTIONS

The following functions are supposed to be used inside a test suite.

EXPORTS

os_type() -> OSType

Types:

OSType = term()

This is the same as returned from os:type/0

This function can be called on controller or target node, and it will always return the OS type of the target node.

fail()
fail(Reason)

Types:

Reason = term()

The reason why the test case failed.

This will make the test suite fail with a given reason, or with suite_failed if no reason was given. Use this function if you want to terminate a test case, as this will make it easier to read the log- and HTML files. Reason will appear in the comment field in the HTML log.

timetrap(Timout) -> Handle

Types:

Timeout = integer() | {hours,H} | {minutes,M} | {seconds,S}
H = M = S = integer()
Pid = pid()

The process that is to be timetrapped (self()by default)

Sets up a time trap for the current process. An expired timetrap kills the process with reason timetrap_timeout. The returned handle is to be given as argument to timetrap_cancel before the timetrap expires. If Timeout is an integer, it is expected to be milliseconds.

Note

If the current process is trapping exits, it will not be killed by the exit signal with reason timetrap_timeout. If this happens, the process will be sent an exit signal with reason kill 10 seconds later which will kill the process. Information about the timetrap timeout will in this case not be found in the test logs. However, the error_logger will be sent a warning.

timetrap_cancel(Handle) -> ok

Types:

Handle = term()

Handle returned from timetrap

This function cancels a timetrap. This must be done before the timetrap expires.

timetrap_scale_factor() -> ScaleFactor

Types:

ScaleFactor = integer()

This function returns the scale factor by which all timetraps are scaled. It is normally 1, but can be greater than 1 if the test_server is running cover, running under purify or valgrind or in a debug-compiled emulator. The scale factor can be used if you need to scale you own timeouts in test cases with same factor as the test_server uses.

sleep(MSecs) -> ok

Types:

MSecs = integer() | float() | infinity

The number of milliseconds to sleep

This function suspends the calling process for at least the supplied number of milliseconds. There are two major reasons why you should use this function instead of timer:sleep, the first being that the module timer may be unavaliable at the time the test suite is run, and the second that it also accepts floating point numbers.

hours(N) -> MSecs
minutes(N) -> MSecs
seconds(N) -> MSecs

Types:

N = integer()

Value to convert to milliseconds.

Theese functions convert N number of hours, minutes or seconds into milliseconds.

Use this function when you want to test_server:sleep/1 for a number of seconds, minutes or hours(!).

format(Format) -> ok
format(Format, Args)
format(Pri,Format)
format(Pri, Format, Args)

Types:

Format = string()

Format as described for io_:format.
Args = list()
List of arguments to format.

Formats output just like io:format but sends the formatted string to a logfile. If the urgency value, Pri, is lower than some threshold value, it will also be written to the test person's console. Default urgency is 50, default threshold for display on the console is 1.

Typically, the test person don't want to see everything a test suite outputs, but is merely interested in if the test cases succeeded or not, wich the test server tells him. If he would like to see more, he could manually change the threshold values by using the test_server_ctrl:set_levels/3 function.

capture_start() -> ok
capture_stop() -> ok
capture_get() -> list()

These functions makes it possible to capture all output to stdout from a process started by the test suite. The list of characters captured can be purged by using capture_get.

messages_get() -> list()

This function will empty and return all the messages currently in the calling process' message queue.

timecall(M, F, A) -> {Time, Value}

Types:

M = atom()

The name of the module where the function resides.
F = atom()
The name of the function to call in the module.
A = list()
The arguments to supplu the called function.
Time = integer()
The number of seconds it took to call the function.
Value = term()
Value returned from the called function.

This function measures the time (in seconds) it takes to call a certain function. The function call is not caught within a catch.

do_times(N, M, F, A) -> ok
do_times(N, Fun)

Types:

N = integer()

Number of times to call MFA.
M = atom()
Module name where the function resides.
F = atom()
Function name to call.
A = list()
Arguments to M:F.

Calls MFA or Fun N times. Useful for extensive testing of a sensitive function.

m_out_of_n(M, N, Fun) -> ok | exit({m_out_of_n_failed, {R,left_to_do}}

Types:

N = integer()

Number of times to call the Fun.
M = integer()
Number of times to require a successful return.

Repeatedly evaluates the given function until it succeeds (doesn't crash) M times. If, after N times, M successful attempts have not been accomplished, the process crashes with reason {m_out_of_n_failed, {R,left_to_do}}, where R indicates how many cases that was still to be successfully completed.

For example:

m_out_of_n(1,4,fun() -> tricky_test_case() end)
Tries to run tricky_test_case() up to 4 times, and is happy if it succeeds once.

m_out_of_n(7,8,fun() -> clock_sanity_check() end)
Tries running clock_sanity_check() up to 8 times,and allows the function to fail once. This might be useful if clock_sanity_check/0 is known to fail if the clock crosses an hour boundary during the test (and the up to 8 test runs could never cross 2 boundaries)

call_crash(M, F, A) -> Result
call_crash(Time, M, F, A) -> Result
call_crash(Time, Crash, M, F, A) -> Result

Types:

Result = ok | exit(call_crash_timeout) | exit({wrong_crash_reason, Reason})
Crash = term()

Crash return from the function.
Time = integer()
Timeout in milliseconds.
M = atom()
Module name where the function resides.
F = atom()
Function name to call.
A = list()
Arguments to M:F.

Spawns a new process that calls MFA. The call is considered successful if the call crashes with the gives reason (Crash) or any reason if not specified. The call must terminate within the given time (default infinity), or it is considered a failure.

temp_name(Stem) -> Name

Types:

Stem = string()

Returns a unique filename starting with Stem with enough extra characters appended to make up a unique filename. The filename returned is guaranteed not to exist in the filesystem at the time of the call.

break(Comment) -> ok

Types:

Comment = string()

Comment is a string which will be written in the shell, e.g. explaining what to do.

This function will cancel all timetraps and pause the execution of the test case until the user executes the continue/0 function. It gives the user the opportunity to interact with the erlang node running the tests, e.g. for debugging purposes or for manually executing a part of the test case.

When the break/1 function is called, the shell will look something like this:

   --- SEMIAUTOMATIC TESTING ---
   The test case executes on process <0.51.0>


   "Here is a comment, it could e.g. instruct to pull out a card"


   -----------------------------

   Continue with --> test_server:continue().        

The user can now interact with the erlang node, and when ready call test_server:continue().

Note that this function can not be used if the test is executed with ts:run/0/1/2/3/4 in batch mode.

continue() -> ok

This function must be called in order to continue after a test case has called break/1.

run_on_shielded_node(Fun, CArgs) -> term()

Types:

Fun = function() (arity 0)

Function to execute on the shielded node.
CArg = string()
Extra command line arguments to use when starting the shielded node.

Fun is executed in a process on a temporarily created hidden node with a proxy for communication with the test server node. The node is called a shielded node (should have been called a shield node). If Fun is successfully executed, the result is returned. A peer node (see start_node/3) started from the shielded node will be shielded from test server node, i.e. they will not be aware of eachother. This is useful when you want to start nodes from earlier OTP releases than the OTP release of the test server node.

Nodes from an earlier OTP release can normally not be started if the test server hasn't been started in compatibility mode (see the +R flag in the erl(1) documentation) of an earlier release. If a shielded node is started in compatibility mode of an earlier OTP release than the OTP release of the test server node, the shielded node can start nodes of an earlier OTP release.

Note

You must make sure that nodes started by the shielded node never communicate directly with the test server node.

Note

Slave nodes always communicate with the test server node; therefore, never start slave nodes from the shielded node, always start peer nodes.

start_node(Name, Type, Options) -> {ok, Node} | {error, Reason}

Types:

Name = atom() | string()

Name of the slavenode to start (as given to -sname or -name)
Type = slave | peer
The type of node to start.
Options = [{atom(), term()]
Tuplelist of options

This functions starts a node, possibly on a remote machine, and guarantees cross architecture transparency. Type is set to either slave or peer.

slave means that the new node will have a master, i.e. the slave node will terminate if the master terminates, TTY output produced on the slave will be sent back to the master node and file I/O is done via the master. The master is normally the target node unless the target is itself a slave.

peer means that the new node is an independent node with no master.

Options is a tuplelist wich can contain one or more of

{remote, true}
Start the node on a remote host. If not specified, the node will be started on the local host (with some exceptions, as for the case of VxWorks, where all nodes are started on a remote host). Test cases that require a remote host will fail with a reasonable comment if no remote hosts are availiable at the time they are run.
{args, Arguments}
Arguments passed directly to the node. This is typically a string appended to the command line.
{wait, false}
Don't wait until the node is up. By default, this function does not return until the node is up and running, but this option makes it return as soon as the node start command is given..
Only valid for peer nodes
{fail_on_error, false}
Returns {error, Reason} rather than failing the test case.
Only valid for peer nodes. Note that slave nodes always act as if they had fail_on_error=false
{erl, ReleaseList}
Use an Erlang emulator determined by ReleaseList when starting nodes, instead of the same emulator as the test server is running. ReleaseList is a list of specifiers, where a specifier is either {release, Rel}, {prog, Prog}, or 'this'. Rel is either the name of a release, e.g., "r12b_patched" or 'latest'. 'this' means using the same emulator as the test server. Prog is the name of an emulator executable. If the list has more than one element, one of them is picked randomly. (Only works on Solaris, and the test server gives warnings when it notices that nodes are not of the same version as itself.)

When specififying this option to run a previous release, use is_release_available/1 function to test if the given release is available and skip the test case if not.

In order to avoid compatibility problems (may not appear right away), use a shielded node (see run_on_shielded_node/2) when starting nodes from different OTP releases than the test server.
{cleanup, false}
Tells the test server not to kill this node if it is still alive after the test case is completed. This is useful if the same node is to be used by a group of test cases.
{env, Env}
Env should be a list of tuples {Name, Val}, where Name is the name of an environment variable, and Val is the value it is to have in the started node. Both Name and Val must be strings. The one exception is Val being the atom false (in analogy with os:getenv/1), which removes the environment variable. Only valid for peer nodes. Not available on VxWorks.

stop_node(NodeName) -> bool()

Types:

NodeName = term()

Name of the node to stop

This functions stops a node previously started with start_node/3. Use this function to stop any node you start, or the test server will produce a warning message in the test logs, and kill the nodes automatically unless it was started with the {cleanup, false} option.

is_release_available(Release) -> bool()

Types:

Release = string() | atom()

Release to test for

This function test whether the release given by Release (for instance, "r12b_patched") is available on the computer that the test_server controller is running on. Typically, you should skip the test case if not.

Caution: This function may not be called from the suite clause of a test case, as the test_server will deadlock.

is_native(Mod) -> bool()

Types:

Mod = atom()

A module name

Checks wether the module is natively compiled or not

app_test(App) -> ok | test_server:fail()
app_test(App,Mode)

Types:

App = term()

The name of the application to test
Mode = pedantic | tolerant
Default is pedantic

Checks an applications .app file for obvious errors. The following is checked:

comment(Comment) -> ok

Types:

Comment = string()

The given String will occur in the comment field of the table on the HTML result page. If called several times, only the last comment is printed. comment/1 is also overwritten by the return value {comment,Comment} from a test case or by fail/1 (which prints Reason as a comment).

TEST SUITE EXPORTS

The following functions must be exported from a test suite module.

EXPORTS

all(suite) -> TestSpec | {skip, Comment}

Types:

TestSpec = list()
Comment = string()

This comment will be printed on the HTML result page

This function must return the test specification for the test suite module. The syntax of a test specification is described in the Test Server User's Guide.

init_per_suite(Config0) -> Config1 | {skip, Comment}

Types:

Config0 = Config1 = [tuple()]
Comment = string()

Describes why the suite is skipped

This function is called before all other test cases in the suite. Config is the configuration which can be modified here. Whatever is returned from this function is given as Config to the test cases.

If this function fails, all test cases in the suite will be skipped.

end_per_suite(Config) -> void()

Types:

Config = [tuple()]

This function is called after the last test case in the suite, and can be used to clean up whatever the test cases have done. The return value is ignored.

init_per_testcase(Case, Config0) -> Config1 | {skip, Comment}

Types:

Case = atom()
Config0 = Config1 = [tuple()]
Comment = string()

Describes why the test case is skipped

This function is called before each test case. The Case argument is the name of the test case, and Config is the configuration which can be modified here. Whatever is returned from this function is given as Config to the test case.

end_per_testcase(Case, Config) -> void()

Types:

Case = atom()
Config = [tuple()]

This function is called after each test case, and can be used to clean up whatever the test case has done. The return value is ignored.

Case(doc) -> [Decription]
Case(suite) -> [] | TestSpec | {skip, Comment}
Case(Config) -> {skip, Comment} | {comment, Comment} | Ok

Types:

Description = string()

Short description of the test case
TestSpec = list()
Comment = string()
This comment will be printed on the HTML result page
Ok = term()
Config = [tuple()]
Elements from the Config parameter can be read with the ?config macro, see section about test suite support macros

The documentation clause (argument doc) can be used for automatic generation of test documentation or test descriptions.

The specification clause (argument spec) shall return an empty list, the test specification for the test case or {skip,Comment}. The syntax of a test specification is described in the Test Server User's Guide.

Note that the specification clause always is executed on the controller host.

The execution clause (argument Config) is only called if the specification clause returns an empty list. The execution clause is the real test case. Here you must call the functions you want to test, and do whatever you need to check the result. If someting fails, make sure the process crashes or call test_server:fail/0/1 (which also will cause the process to crash).

You can return {skip,Comment} if you decide not to run the test case after all, e.g. if it is not applicable on this platform.

You can return {comment,Comment} if you wish to print some information in the 'Comment' field on the HTML result page.

If the execution clause returns anything else, it is considered a success, unless it is {'EXIT',Reason} or {'EXIT',Pid,Reason} which can't be distinguished from a crash, and thus will be considered a failure.

A conf test case is a group of test cases with an init and a cleanup function. The init and cleanup functions are also test cases, but they have spcial rules:

TEST SUITE LINE NUMBERS

If a test case fails, the test server can report the exact line number at which it failed. There are two ways of doing this, either by using the line macro or by using the test_server_line parse transform.

The line macro is described under TEST SUITE SUPPORT MACROS below. The line macro will only report the last line executed when a test case failed.

The test_server_line parse transform is activated by including the headerfile test_server_line.hrl in the test suite. When doing this, it is important that the test_server_line module is in the code path of the erlang node compiling the test suite. The parse transform will report a history of a maximum of 10 lines when a test case fails. Consecutive lines in the same function are not shown.

The attribute -no_lines(FuncList). can be used in the test suite to exclude specific functions from the parse transform. This is necessary e.g. for functions that are executed on old (i.e. <R10B) OTP releases. FuncList = [{Func,Arity}].

If both the line macro and the parse tranform is used in the same module, the parse transform will overrule the macro.

TEST SUITE SUPPORT MACROS

There are some macros defined in the test_server.hrl that are quite useful for test suite programmers:

The line macro, is quite essential when writing test cases. It tells the test server exactly what line of code that is being executed, so that it can report this line back if the test case fails. Use this macro at the beginning of every test case line of code.

The config macro, is used to retrieve information from the Config variable sent to all test cases. It is used with two arguments, where the first is the name of the configuration variable you wish to retrieve, and the second is the Config variable supplied to the test case from the test server.

Possible configuration variables include:

Examples of the line and config macros can be seen in the Examples chapter in the user's guide.

If the line_trace macro is defined, you will get a timestamp (erlang:now()) in your minor log for each line macro in your suite. This way you can at any time see which line is currently being executed, and when the line was called.

The line_trace macro can also be used together with the test_server_line parse tranform described above. A timestamp will then be written for each line in the suite, except for functions stated in the -no_lines attribute.

The line_trace macro can e.g. be defined as a compile option, like this:
erlc -W -Dline_trace my_SUITE.erl


test_server 3.2.0
Copyright © 1991-2007 Ericsson AB