[Ericsson AB]

dets

MODULE

dets

MODULE SUMMARY

A Disk Based Term Storage

DESCRIPTION

The module dets provides a term storage on file. The stored terms, in this module called objects, are tuples such that one element is defined to be the key. A Dets table is a collection of objects with the key at the same position stored on a file.

Dets is used by the Mnesia application, and is provided as is for users who are interested in an efficient storage of Erlang terms on disk only. Many applications just need to store some terms in a file. Mnesia adds transactions, queries, and distribution. The size of Dets files cannot exceed 2 GB. If larger tables are needed, Mnesia's table fragmentation can be used.

There are three types of Dets tables: set, bag and duplicate_bag. A table of type set has at most one object with a given key. If an object with a key already present in the table is inserted, the existing object is overwritten by the new object. A table of type bag has zero or more different objects with a given key. A table of type duplicate_bag has zero or more possibly equal objects with a given key.

Dets tables must be opened before they can be updated or read, and when finished they must be properly closed. If a table has not been properly closed, Dets will automatically repair the table. This can take a substantial time if the table is large. A Dets table is closed when the process which opened the table terminates. If several Erlang processes (users) open the same Dets table, they will share the table. The table is properly closed when all users have either terminated or closed the table. Dets tables are not properly closed if the Erlang runtime system is terminated abnormally.

Note!

A ^C command abnormally terminates an Erlang runtime system in a Unix environment with a break-handler.

Since all operations performed by Dets are disk operations, it is important to realize that a single look-up operation involves a series of disk seek and read operations. For this reason, the Dets functions are much slower than the corresponding Ets functions, although Dets exports a similar interface.

Dets organizes data as a linear hash list and the hash list grows gracefully as more data is inserted into the table. Space management on the file is performed by what is called a buddy system. The current implementation keeps the entire buddy system in RAM, which implies that if the table gets heavily fragmented, quite some memory can be used up. The only way to defragment a table is to close it and then open it again with the repair option set to force.

It is worth noting that the ordered_set type present in Ets is not yet implemented by Dets, neither is the limited support for concurrent updates which makes a sequence of first and next calls safe to use on fixed Ets tables. Both these features will be implemented by Dets in a future release of Erlang/OTP. Until then, the Mnesia application (or some user implemented method for locking) has to be used to implement safe concurrency. Currently, no library of Erlang/OTP has support for ordered disk based term storage.

Two versions of the format used for storing objects on file are supported by Dets. The first version, 8, is the format always used for tables created by OTP R7 and earlier. The second version, 9, is the default version of tables created by OTP R8 (and later OTP releases). OTP R8 can create version 8 tables, and convert version 8 tables to version 9, and vice versa, upon request.

All Dets functions return {error, Reason} if an error occurs (first/1 and next/2 are exceptions, they exit the process with the error tuple). If given badly formed arguments, all functions exit the process with a badarg message.

Types 

access() = read | read_write
auto_save() = infinity | int()
bindings_cont() = tuple()
bool() = true | false
file() = string()
int() = integer() >= 0
keypos() = integer() >= 1
name() = atom() | ref()
no_slots() = integer() >= 0 | default
object() = tuple()
object_cont() = tuple()
select_cont() = tuple()
type() = bag | duplicate_bag | set
version() = 8 | 9 | default

EXPORTS

all() -> [Name]

Types:

Name = name()

Returns a list of the names of all open tables on this node.

bchunk(Name, Continuation) -> {Continuation2, Data} | '$end_of_table' | {error, Reason}

Types:

Name = name()
Continuation = start | cont()
Continuation2 = cont()
Data = binary() | tuple()

Returns a list of objects stored in a table. The exact representation of the returned objects is not public. The lists of data can be used for initializing a table by giving the value bchunk to the format option of the init_table/3 function. The Mnesia application uses this function for copying open tables.

Unless the table is protected using safe_fixtable/2, calls to bchunk/2 may not work as expected if concurrent updates are made to the table.

The first time bchunk/2 is called, an initial continuation, the atom start, must be provided.

The bchunk/2 function returns a tuple {Continuation2, Data}, where Data is a list of objects. Continuation2 is another continuation which is to be passed on to a subsequent call to bchunk/2. With a series of calls to bchunk/2 it is possible to extract all objects of the table.

bchunk/2 returns '$end_of_table' when all objects have been returned, or {error, Reason} if an error occurs.

close(Name) -> ok | {error, Reason}

Types:

Name = name()

Closes a table. Only processes that have opened a table are allowed to close it.

All open tables must be closed before the system is stopped. If an attempt is made to open a table which has not been properly closed, Dets automatically tries to repair the table.

delete(Name, Key) -> ok | {error, Reason}

Types:

Name = name()

Deletes all objects with the key Key from the table Name.

delete_all_objects(Name) -> ok | {error, Reason}

Types:

Name = name()

Deletes all objects from a table in almost constant time. However, if the table if fixed, delete_all_objects(T) is equivalent to match_delete(T, '_').

delete_object(Name, Object) -> ok | {error, Reason}

Types:

Name = name()
Object = object()

Deletes all instances of a given object from a table. If a table is of type bag or duplicate_bag, the delete/2 function cannot be used to delete only some of the objects with a given key. This function makes this possible.

first(Name) -> Key | '$end_of_table'

Types:

Key = term()
Name = name()

Returns the first key stored in the table Name according to the table's internal order, or '$end_of_table' if the table is empty.

Unless the table is protected using safe_fixtable/2, subsequent calls to next/2 may not work as expected if concurrent updates are made to the table.

Should an error occur, the process is exited with an error tuple {error, Reason}. The reason for not returning the error tuple is that it cannot be distinguished from a key.

There are two reasons why first/1 and next/2 should not be used: they are not very efficient, and they prevent the use of the key '$end_of_table' since this atom is used to indicate the end of the table. If possible, the match, match_object, and select functions should be used for traversing tables.

foldl(Function, Acc0, Name) -> Acc1 | {error, Reason}

Types:

Function = fun(Object, AccIn) -> AccOut
Acc0 = Acc1 = AccIn = AccOut = term()
Name = name()
Object = object()

Calls Function on successive elements of the table Name together with an extra argument AccIn. The order in which the elements of the table are traversed is unspecified. Function must return a new accumulator which is passed to the next call. Acc0 is returned if the table is empty.

foldr(Function, Acc0, Name) -> Acc1 | {error, Reason}

Types:

Function = fun(Object, AccIn) -> AccOut
Acc0 = Acc1 = AccIn = AccOut = term()
Name = name()
Object = object()

Calls Function on successive elements of the table Name together with an extra argument AccIn. The order in which the elements of the table are traversed is unspecified. Function must return a new accumulator which is passed to the next call. Acc0 is returned if the table is empty.

from_ets(Name, EtsTab) -> ok | {error, Reason}

Types:

Name = name()
EtsTab = - see ets(3) -

Deletes all objects of the table Name and then inserts all the objects of the Ets table EtsTab. The order in which the objects are inserted is not specified. Since ets:safe_fixtable/2 is called the Ets table must be public or owned by the calling process.

info(Name) -> InfoList | undefined

Types:

Name = name()
InfoList = [{Item, Value}]

Returns information about the table Name as a list of {Item, Value} tuples:

info(Name, Item) -> Value | undefined

Types:

Name = name()

Returns the information associated with Item for the table Name. In addition to the {Item, Value} pairs defined for info/1, the following items are allowed:

init_table(Name, InitFun [, Options]) -> ok | {error, Reason}

Types:

Name = atom()
InitFun = fun(Arg) -> Res
Arg = read | close
Res = end_of_input | {[object()], InitFun} | {Data, InitFun} | term()
Data = binary() | tuple()

Replaces the existing objects of the table Name with objects created by calling the input function InitFun, see below. The reason for using this function rather than calling insert/2 is that of efficiency. It should be noted that the input functions are called by the process that handles requests to the Dets table, not by the calling process.

When called with the argument read the function InitFun is assumed to return end_of_input when there is no more input, or {Objects, Fun}, where Objects is a list of objects and Fun is a new input function. Any other value Value is returned as an error {error, {init_fun, Value}}. Each input function will be called exactly once, and should an error occur, the last function is called with the argument close, the reply of which is ignored.

If the type of the table is set and there is more than one object with a given key, one of the objects is chosen. This is not necessarily the last object with the given key in the sequence of objects returned by the input functions. Extra objects should be avoided, or the file will be unnecessarily fragmented. This holds also for duplicated objects stored in tables of type duplicate_bag.

It is important that the table has a sufficient number of slots for the objects. If not, the hash list will start to grow when init_table/2 returns which will significantly slow down access to the table for a period of time. The minimum number of slots is set by the open_file/2 option min_no_slots and returned by the info/2 item no_slots. See also the min_no_slots option below.

The Options argument is a list of {Key, Val} tuples where the following values are allowed:

insert(Name, Objects) -> ok | {error, Reason}

Types:

Name = name()
Objects = object() | [object()]

Inserts one or more objects into the table Name. If there already exists an object with the same key as some of the given objects and the table type is set, the old object will be replaced.

insert_new(Name, Objects) -> Bool

Types:

Name = name()
Objects = object() | [object()]
Bool = bool()

Inserts one or more objects into the table Name. If there already exists an object with the same key as some of the given objects the table is not updated and false is returned, otherwise the objects are inserted and true returned.

is_compatible_bchunk_format(Name, BchunkFormat) -> Bool

Types:

Name = name()
BchunkFormat = binary()
Bool = bool()

Returns true if it would be possible to initialize the table Name, using init_table/3 with the option {format, bchunk}, with objects read with bchunk/2 from some table T such that calling info(T, bchunk_format) returns BchunkFormat.

is_dets_file(FileName) -> Bool | {error, Reason}

Types:

FileName = file()
Bool = bool()

Returns true if the file FileName is a Dets table, false otherwise.

lookup(Name, Key) -> [Object] | {error, Reason}

Types:

Key = term()
Name = name()
Object = object()

Returns a list of all objects with the key Key stored in the table Name. For example: 

2> dets:open_file(abc, [{type, bag}]).
{ok,abc}
3> dets:insert(abc, {1,2,3}).
ok
4> dets:insert(abc, {1,3,4}).
ok
5> dets:lookup(abc, 1).
[{1,2,3},{1,3,4}]

If the table is of type set, the function returns either the empty list or a list with one object, as there cannot be more than one object with a given key. If the table is of type bag or duplicate_bag, the function returns a list of arbitrary length.

Note that the order of objects returned is unspecified. In particular, the order in which objects were inserted is not reflected.

match(Continuation) -> {[Match], Continuation2} | '$end_of_table' | {error, Reason}

Types:

Continuation = Continuation2 = bindings_cont()
Match = [term()]

Matches some objects stored in a table and returns a list of the bindings that match a given pattern in some unspecified order. The table, the pattern, and the number of objects that are matched are all defined by Continuation, which has been returned by a prior call to match/1 or match/3.

When all objects of the table have been matched, '$end_of_table' is returned.

match(Name, Pattern) -> [Match] | {error, Reason}

Types:

Name = name()
Pattern = tuple()
Match = [term()]

Returns for each object of the table Name that matches Pattern a list of bindings in some unspecified order. See ets(3) for a description of patterns. If the keypos'th element of Pattern is unbound, all objects of the table are matched. If the keypos'th element is bound, only the objects with the right key are matched.

match(Name, Pattern, N) -> {[Match], Continuation} | '$end_of_table' | {error, Reason}

Types:

Name = name()
Pattern = tuple()
N = default | int()
Match = [term()]
Continuation = bindings_cont()

Matches some or all objects of the table Name and returns a list of the bindings that match Pattern in some unspecified order. See ets(3) for a description of patterns.

A tuple of the bindings and a continuation is returned, unless the table is empty, in which case '$end_of_table' is returned. The continuation is to be used when matching further objects by calling match/1.

If the keypos'th element of Pattern is bound, all objects of the table are matched. If the keypos'th element is unbound, all objects of the table are matched, N objects at a time. The default, indicated by giving N the value default, is to let the number of objects vary depending on the sizes of the objects. If Name is a version 9 table, all objects with the same key are always matched at the same time which implies that more than N objects may sometimes be matched.

The table should always be protected using safe_fixtable/2 before calling match/3, or errors may occur when calling match/1.

match_delete(Name, Pattern) -> N | {error, Reason}

Types:

Name = name()
N = int()
Pattern = tuple()

Deletes all objects that match Pattern from the table Name, and returns the number of deleted objects. See ets(3) for a description of patterns.

If the keypos'th element of Pattern is bound, only the objects with the right key are matched.

match_object(Continuation) -> {[Object], Continuation2} | '$end_of_table' | {error, Reason}

Types:

Continuation = Continuation2 = object_cont()
Object = object()

Returns a list of some objects stored in a table that match a given pattern in some unspecified order. The table, the pattern, and the number of objects that are matched are all defined by Continuation, which has been returned by a prior call to match_object/1 or match_object/3.

When all objects of the table have been matched, '$end_of_table' is returned.

match_object(Name, Pattern) -> [Object] | {error, Reason}

Types:

Name = name()
Pattern = tuple()
Object = object()

Returns a list of all objects of the table Name that match Pattern in some unspecified order. See ets(3) for a description of patterns.

If the keypos'th element of Pattern is unbound, all objects of the table are matched. If the keypos'th element of Pattern is bound, only the objects with the right key are matched.

Using the match_object functions for traversing all objects of a table is more efficient than calling first/1 and next/2 or slot/2.

match_object(Name, Pattern, N) -> {[Object], Continuation} | '$end_of_table' | {error, Reason}

Types:

Name = name()
Pattern = tuple()
N = default | int()
Object = object()
Continuation = object_cont()

Matches some or all objects stored in the table Name and returns a list of the objects that match Pattern in some unspecified order. See ets(3) for a description of patterns.

A list of objects and a continuation is returned, unless the table is empty, in which case '$end_of_table' is returned. The continuation is to be used when matching further objects by calling match_object/1.

If the keypos'th element of Pattern is bound, all objects of the table are matched. If the keypos'th element is unbound, all objects of the table are matched, N objects at a time. The default, indicated by giving N the value default, is to let the number of objects vary depending on the sizes of the objects. If Name is a version 9 table, all matching objects with the same key are always returned in the same reply which implies that more than N objects may sometimes be returned.

The table should always be protected using safe_fixtable/2 before calling match_object/3, or errors may occur when calling match_object/1.

member(Name, Key) -> Bool | {error, Reason}

Types:

Name = name()
Key = term()
Bool = bool()

Works like lookup/2, but does not return the objects. The function returns true if one or more elements of the table has the key Key, false otherwise.

next(Name, Key1) -> Key2 | '$end_of_table'

Types:

Name = name()
Key1 = Key2 = term()

Returns the key following Key1 in the table Name according to the table's internal order, or '$end_of_table' if there is no next key.

Should an error occur, the process is exited with an error tuple {error, Reason}.

Use first/1 to find the first key in the table.

open_file(Filename) -> {ok, Reference} | {error, Reason}

Types:

FileName = file()
Reference = ref()

Opens an existing table. If the table has not been properly closed, the error {error, need_repair} is returned. The returned reference is to be used as the name of the table. This function is most useful for debugging purposes.

open_file(Name, Args) -> {ok, Name} | {error, Reason}

Types:

Name = atom()

Opens a table. An empty Dets table is created if no file exists.

The atom Name is the name of the table. The table name must be provided in all subsequent operations on the table. The name can be used by other processes as well, and several process can share one table.

If two processes open the same table by giving the same name and arguments, then the table will have two users. If one user closes the table, it still remains open until the second user closes the table.

The Args argument is a list of {Key, Val} tuples where the following values are allowed:

pid2name(Pid) -> {ok, Name} | undefined

Types:

Name = name()
Pid = pid()

Returns the name of the table given the pid of a process that handles requests to a table, or undefined if there is no such table.

This function is meant to be used for debugging only.

repair_continuation(Continuation, MatchSpec) -> Continuation2

Types:

Continuation = Continuation2 = select_cont()
MatchSpec = match_spec()

This function can be used to restore an opaque continuation returned by select/3 or select/1 if the continuation has passed through external term format (been sent between nodes or stored on disk).

The reason for this function is that continuation terms contain compiled match specifications and therefore will be invalidated if converted to external term format. Given that the original match specification is kept intact, the continuation can be restored, meaning it can once again be used in subsequent select/1 calls even though it has been stored on disk or on another node.

See also ets(3) for further explanations and examples.

Note!

This function is very rarely needed in application code. It is used by Mnesia to implement distributed select/3 and select/1 sequences. A normal application would either use Mnesia or keep the continuation from being converted to external format.

The reason for not having an external representation of compiled match specifications is performance. It may be subject to change in future releases, while this interface will remain for backward compatibility.

safe_fixtable(Name, Fix)

Types:

Name = name()
Fix = bool()

If Fix is true, the table Name is fixed (once more) by the calling process, otherwise the table is released. The table is also released when a fixing process terminates.

If several processes fix a table, the table will remain fixed until all processes have released it or terminated. A reference counter is kept on a per process basis, and N consecutive fixes require N releases to release the table.

It is not guaranteed that calls to first/1, next/2, select and match functions work as expected even if the table has been fixed; the limited support for concurrency implemented in Ets has not yet been implementeded in Dets. Fixing a table currently only disables resizing of the hash list of the table.

If objects have been added while the table was fixed, the hash list will start to grow when the table is released which will significantly slow down access to the table for a period of time.

select(Continuation) -> {Selection, Continuation2} | '$end_of_table' | {error, Reason}

Types:

Continuation = Continuation2 = select_cont()
Selection = [term()]

Returns the results of applying a match specification to some objects stored in a table. The table, the match specification, and the number of objects that are matched are all defined by Continuation, which has been returned by a prior call to select/1 or select/3.

When all objects of the table have been matched, '$end_of_table' is returned.

select(Name, MatchSpec) -> Selection | {error, Reason}

Types:

Name = name()
MatchSpec = match_spec()
Selection = [term()]

Returns the results of applying the match specification MatchSpec to all or some objects stored in the table Name. The order of the objects is not specified. See the ERTS User's Guide for a description of match specifications.

If the keypos'th element of MatchSpec is unbound, the match specification is applied to all objects of the table. If the keypos'th element is bound, the match specification is applied to the objects with the right key(s) only.

Using the select functions for traversing all objects of a table is more efficient than calling first/1 and next/2 or slot/2.

select(Name, MatchSpec, N) -> {Selection, Continuation} | '$end_of_table' | {error, Reason}

Types:

Name = name()
MatchSpec = match_spec()
N = default | int()
Selection = [term()]
Continuation = select_cont()

Returns the results of applying the match specification MatchSpec to some or all objects stored in the table Name. The order of the objects is not specified. See the ERTS User's Guide for a description of match specifications.

A tuple of the results of applying the match specification and a continuation is returned, unless the table is empty, in which case '$end_of_table' is returned. The continuation is to be used when matching further objects by calling select/1.

If the keypos'th element of MatchSpec is bound, the match specification is applied to all objects of the table with the right key(s). If the keypos'th element of MatchSpec is unbound, the match specification is applied to all objects of the table, N objects at a time. The default, indicated by giving N the value default, is to let the number of objects vary depending on the sizes of the objects. If Name is a version 9 table, all objects with the same key are always handled at the same time which implies that the match specification may be applied to more than N objects.

The table should always be protected using safe_fixtable/2 before calling select/3, or errors may occur when calling select/1.

select_delete(Name, MatchSpec) -> N | {error, Reason}

Types:

Name = name()
MatchSpec = match_spec()
N = int()

Deletes each object from the table Name such that applying the match specification MatchSpec to the object returns the value true. See the ERTS User's Guide for a description of match specifications. Returns the number of deleted objects.

If the keypos'th element of MatchSpec is bound, the match specification is applied to the objects with the right key(s) only.

slot(Name, I) -> '$end_of_table' | [Object] | {error, Reason}

Types:

Name = name()
I = int()
Object = object()

The objects of a table are distributed among slots, starting with slot 0 and ending with slot n. This function returns the list of objects associated with slot I. If I is greater than n '$end_of_table' is returned.

sync(Name) -> ok | {error, Reason}

Types:

Name = name()

Ensures that all updates made to the table Name are written to disk. This also applies to tables which have been opened with the ram_file flag set to true. In this case, the contents of the RAM file are flushed to disk.

Note that the space management data structures kept in RAM, the buddy system, is also written to the disk. This may take some time if the table is fragmented.

table(Name [, Options]) -> QueryHandle

Types:

Name = name()
QueryHandle = - a query handle, see qlc(3) -
Options = [Option] | Option
Option = {n_objects, Limit} | {traverse, TraverseMethod}
Limit = default | integer() >= 1
TraverseMethod = first_next | select | {select, MatchSpec}
MatchSpec = match_spec()

Returns a QLC (Query List Comprehension) query handle. The module qlc implements a query language aimed mainly at Mnesia but Ets tables, Dets tables, and lists are also recognized by QLC as sources of data. Calling dets:table/1,2 is the means to make the Dets table Name usable to QLC.

When there are only simple restrictions on the key position QLC uses dets:lookup/2 to look up the keys, but when that is not possible the whole table is traversed. The option traverse determines how this is done:

The following example uses an explicit match specification to traverse the table: 

1> dets:open_file(t, []),
dets:insert(t, [{1,a},{2,b},{3,c},{4,d}]),
MS = ets:fun2ms(fun({X,Y}) when (X > 1) or (X < 5) -> {Y} end),
QH1 = dets:table(t, [{traverse, {select, MS}}]).

An example with implicit match specification: 

2> QH2 = qlc:q([{Y} || {X,Y} <- dets:table(t), (X > 1) or (X < 5)]).

The latter example is in fact equivalent to the former which can be verified using the function qlc:info/1: 

3> qlc:info(QH1) =:= qlc:info(QH2).
true

qlc:info/1 returns information about a query handle, and in this case identical information is returned for the two query handles.

to_ets(Name, EtsTab) -> EtsTab | {error, Reason}

Types:

Name = name()
EtsTab = - see ets(3) -

Inserts the objects of the Dets table Name into the Ets table EtsTab. The order in which the objects are inserted is not specified. The existing objects of the Ets table are kept unless overwritten.

traverse(Name, Fun) -> Return | {error, Reason}

Types:

Fun = fun(Object) -> FunReturn
FunReturn = continue | {continue, Val} | {done, Value}
Val = Value = term()
Name = name()
Object = object()
Return = [term()]

Applies Fun to each object stored in the table Name in some unspecified order. Different actions are taken depending on the return value of Fun. The following Fun return values are allowed:

continue
Continue to perform the traversal. For example, the following function can be used to print out the contents of a table:
fun(X) -> io:format("~p~n", [X]), continue end.
{continue, Val}
Continue the traversal and accumulate Val. The following function is supplied in order to collect all objects of a table in a list: 
fun(X) -> {continue, X} end.
{done, Value}
Terminate the traversal and return [Value | Acc].

Any other value returned by Fun terminates the traversal and is immediately returned.

update_counter(Name, Key, Increment) -> Result

Types:

Name = name()
Key = term()
Increment = {Pos, Incr} | Incr
Pos = Incr = Result = integer()

Updates the object with key Key stored in the table Name of type set by adding Incr to the element at the Pos:th position. The new counter value is returned. If no position is specified, the element directly following the key is updated.

This functions provides a way of updating a counter, without having to look up an object, update the object by incrementing an element and insert the resulting object into the table again.

See Also

ets(3), mnesia(3), qlc(3)

AUTHORS

Claes Wikström - support@erlang.ericsson.se
Hans Bolinder - support@erlang.ericsson.se
stdlib 1.14.1
Copyright © 1991-2006 Ericsson AB