View Source inet_res (kernel v10.0)

A rudimentary DNS client.

This module performs DNS name resolving towards recursive name servers.

See also ERTS User's Guide: Inet Configuration or more information about how to configure an Erlang runtime system for IP communication, and how to enable this DNS client by defining 'dns' as a lookup method. The DNS client then acts as a backend for the resolving functions in inet.

This DNS client can resolve DNS records even if it is not used for normal name resolving in the node.

This is not a full-fledged resolver, only a DNS client that relies on asking trusted recursive name servers.

Name Resolving

UDP queries are used unless resolver option usevc is true, which forces TCP queries. If the query is too large for UDP, TCP is used instead. For regular DNS queries, 512 bytes is the size limit.

When EDNS is enabled (resolver option edns is set to the EDNS version (that is; 0 instead of false), resolver option udp_payload_size sets the payload size limit. If a name server replies with the TC bit set (truncation), indicating that the answer is incomplete, the query is retried towards the same name server using TCP. Resolver option udp_payload_size also sets the advertised size for the maximum allowed reply size, if EDNS is enabled, otherwise the name server uses the limit 512 bytes. If the reply is larger, it gets truncated, forcing a TCP requery.

For UDP queries, resolver options timeout and retry control retransmission. Each name server in the nameservers list is tried with a time-out of timeout/retry. Then all name servers are tried again, doubling the time-out, for a total of retry times.

But before all name servers are tried again, there is a (user configurable) time-out, servfail_retry_timeout. The point of this is to prevent the new query to be handled by a server's servfail cache (a client that is too eager will actually only get what is in the servfail cache). If there is too little time left of the resolver call's time-out to do a retry, the resolver call may return before the call's time-out has expired.

For queries not using the search list, if the query to all nameservers results in {error,nxdomain} or an empty answer, the same query is tried for alt_nameservers.

Resolver Types

The following data types concern the resolver:

DNS Types

The following data types concern the DNS client:

Example

This access functions example shows how lookup/3 can be implemented using resolve/3 from outside the module:

example_lookup(Name, Class, Type) ->
    case inet_res:resolve(Name, Class, Type) of
        {ok,Msg} ->
            [inet_dns:rr(RR, data)
             || RR <- inet_dns:msg(Msg, anlist),
                 inet_dns:rr(RR, type) =:= Type,
                 inet_dns:rr(RR, class) =:= Class];
        {error,_} ->
            []
     end.

Summary

Types

DNS record data (content)

A DNS message.

A string with no adjacent dots.

Extended variant of inet:hostent/0.

Types

Link to this type

dns_class()

View Source (not exported)
-type dns_class() :: in | chaos | hs | any.
Link to this type

dns_data()

View Source (not exported)
-type dns_data() ::
          dns_name() |
          inet:ip4_address() |
          inet:ip6_address() |
          {MName :: dns_name(),
           RName :: dns_name(),
           Serial :: integer(),
           Refresh :: integer(),
           Retry :: integer(),
           Expiry :: integer(),
           Minimum :: integer()} |
          {inet:ip4_address(), Proto :: integer(), BitMap :: binary()} |
          {CpuString :: string(), OsString :: string()} |
          {RM :: dns_name(), EM :: dns_name()} |
          {Prio :: integer(), dns_name()} |
          {Prio :: integer(), Weight :: integer(), Port :: integer(), dns_name()} |
          {Order :: integer(),
           Preference :: integer(),
           Flags :: string(),
           Services :: string(),
           Regexp :: string(),
           dns_name()} |
          [string()] |
          binary().

DNS record data (content)

The basic type of each data element is specified in this type.

Regexp is a UTF-8 string/0. The other string/0s are actually Latin-1 strings.

Link to this type

dns_msg()

View Source (not exported)
-type dns_msg() :: term().

A DNS message.

This is the start of a hierarchy of opaque data structures that can be examined with access functions in inet_dns, which return lists of {Field,Value} tuples. The arity 2 functions return the value for a specified field.

dns_msg() = DnsMsg
    inet_dns:msg(DnsMsg) ->
        [ {header, dns_header()}
        | {qdlist, dns_query()}
        | {anlist, dns_rr()}
        | {nslist, dns_rr()}
        | {arlist, dns_rr()} ]
    inet_dns:msg(DnsMsg, header) -> dns_header() % for example
    inet_dns:msg(DnsMsg, Field) -> Value

dns_header() = DnsHeader
    inet_dns:header(DnsHeader) ->
        [ {id, integer()}
        | {qr, boolean()}
        | {opcode, query | iquery | status | integer()}
        | {aa, boolean()}
        | {tc, boolean()}
        | {rd, boolean()}
        | {ra, boolean()}
        | {pr, boolean()}
        | {rcode, integer(0..16)} ]
    inet_dns:header(DnsHeader, Field) -> Value

query_type() = axfr | mailb | maila | any | dns_rr_type()

dns_query() = DnsQuery
    inet_dns:dns_query(DnsQuery) ->
        [ {domain, dns_name()}
        | {type, query_type()}
        | {class, dns_class()} ]
    inet_dns:dns_query(DnsQuery, Field) -> Value

dns_rr() = DnsRr
    inet_dns:rr(DnsRr) -> DnsRrFields | DnsRrOptFields
    DnsRrFields = [ {domain, dns_name()}
                  | {type, dns_rr_type()}
                  | {class, dns_class()}
                  | {ttl, integer()}
                  | {data, dns_data()} ]
    DnsRrOptFields = [ {domain, dns_name()}
                     | {type, opt}
                     | {udp_payload_size, integer()}
                     | {ext_rcode, integer()}
                     | {version, integer()}
                     | {z, integer()}
                     | {data, dns_data()} ]
    inet_dns:rr(DnsRr, Field) -> Value

There is an information function for the types above:

inet_dns:record_type(dns_msg()) -> msg;
inet_dns:record_type(dns_header()) -> header;
inet_dns:record_type(dns_query()) -> dns_query;
inet_dns:record_type(dns_rr()) -> rr;
inet_dns:record_type(_) -> undefined.

So, inet_dns:(inet_dns:record_type(X))(X) converts any of these data structures into a {Field,Value} list.

Link to this type

dns_name()

View Source (not exported)
-type dns_name() :: string().

A string with no adjacent dots.

Link to this type

dns_rr_type()

View Source (not exported)
-type dns_rr_type() ::
          a | aaaa | caa | cname | gid | hinfo | ns | mb | md | mg | mf | minfo | mx | naptr | null |
          ptr | soa | spf | srv | txt | uid | uinfo | unspec | uri | wks.
-type hostent() ::
          inet:hostent() |
          {hostent,
           H_name :: inet:hostname(),
           H_aliases :: [inet:hostname()],
           H_addrtype :: dns_rr_type(),
           H_length :: non_neg_integer(),
           H_addr_list :: [dns_data()]}.

Extended variant of inet:hostent/0.

Allows dns_rr_type/0 for the #hostent{}.h_addrtype field, and [dns_data/0] for the #hostent{}.h_addr_list field.

-type nameserver() :: {inet:ip_address(), Port :: 1..65535}.
-type res_error() :: formerr | qfmterror | servfail | nxdomain | notimp | refused | badvers | timeout.
-type res_option() ::
          {alt_nameservers, [nameserver()]} |
          {edns, 0 | false} |
          {inet6, boolean()} |
          {nameservers, [nameserver()]} |
          {recurse, boolean()} |
          {retry, integer()} |
          {timeout, integer()} |
          {udp_payload_size, integer()} |
          {dnssec_ok, boolean()} |
          {usevc, boolean()} |
          {nxdomain_reply, boolean()}.

Legacy Functions

Link to this function

nnslookup(Name, Class, Type, Nameservers)

View Source
-spec nnslookup(Name, Class, Type, Nameservers) -> {ok, dns_msg()} | {error, Reason}
                   when
                       Name :: dns_name() | inet:ip_address(),
                       Class :: dns_class(),
                       Type :: dns_rr_type(),
                       Nameservers :: [nameserver()],
                       Reason :: inet:posix().

Equivalent to nnslookup(Name, Class, Type, NSs, infinity).

Link to this function

nnslookup(Name, Class, Type, Nameservers, Timeout)

View Source
-spec nnslookup(Name, Class, Type, Nameservers, Timeout) -> {ok, dns_msg()} | {error, Reason}
                   when
                       Name :: dns_name() | inet:ip_address(),
                       Class :: dns_class(),
                       Type :: dns_rr_type(),
                       Timeout :: timeout(),
                       Nameservers :: [nameserver()],
                       Reason :: inet:posix().

Resolve a DNS query.

Like nslookup/4 but calls resolve/5 with both the arguments Opts = [{nameservers, Nameservers}] and Timeout.

Link to this function

nslookup(Name, Class, Type)

View Source
-spec nslookup(Name, Class, Type) -> {ok, dns_msg()} | {error, Reason}
                  when
                      Name :: dns_name() | inet:ip_address(),
                      Class :: dns_class(),
                      Type :: dns_rr_type(),
                      Reason :: inet:posix() | res_error().

Equivalent to nslookup(Name, Class, Type, infinity).

-spec nslookup(Name, Class, Type, Timeout) -> {ok, dns_msg()} | {error, Reason}
                  when
                      Name :: dns_name() | inet:ip_address(),
                      Class :: dns_class(),
                      Type :: dns_rr_type(),
                      Timeout :: timeout(),
                      Reason :: inet:posix() | res_error();
              (Name, Class, Type, Nameservers) -> {ok, dns_msg()} | {error, Reason}
                  when
                      Name :: dns_name() | inet:ip_address(),
                      Class :: dns_class(),
                      Type :: dns_rr_type(),
                      Nameservers :: [nameserver()],
                      Reason :: inet:posix() | res_error().

Resolve a DNS query.

This function is a legacy wrapper to resolve/5 that simplifies errors matching {error, {Reason, _}} into {error, Reason} or {error, einval}.

With argument Timeout calls resolve/5 with Opts = [].

With argument Nameservers calls resolve/5 with Opts = [{nameservers, Nameservers}] and Timeout = infinity.

Functions

-spec getbyname(Name, Type) -> {ok, Hostent} | {error, Reason}
                   when
                       Name :: dns_name(),
                       Type :: dns_rr_type(),
                       Hostent :: inet:hostent() | hostent(),
                       Reason :: inet:posix() | res_error().

Equivalent to getbyname(Name, Type, infinity).

Link to this function

getbyname(Name, Type, Timeout)

View Source
-spec getbyname(Name, Type, Timeout) -> {ok, Hostent} | {error, Reason}
                   when
                       Name :: dns_name(),
                       Type :: dns_rr_type(),
                       Timeout :: timeout(),
                       Hostent :: inet:hostent() | hostent(),
                       Reason :: inet:posix() | res_error().

Resolve a DNS query.

Resolves a DNS query of the specified Type for the specified host, of classin. Returns, on success, when resolving a Type = a|aaaa DNS record, a #hostent{} record with #hostent.h_addrtype = inet|inet6, respectively; see inet:hostent/0.

When resolving other Type = dns_rr_type():s (of class in), also returns a #hostent{} record but with dns_rr_type/0 in #hostent.h_addrtype, and the resolved dns_data/0 in #hostent.h_addr_list; see hostent/0.

This function uses resolver option search that is a list of domain names. If the name to resolve contains no dots, it is prepended to each domain name in the search list, and they are tried in order. If the name contains dots, it is first tried as an absolute name and if that fails, the search list is used. If the name has a trailing dot, it is supposed to be an absolute name and the search list is not used.

-spec gethostbyaddr(Address) -> {ok, Hostent} | {error, Reason}
                       when
                           Address :: inet:ip_address(),
                           Hostent :: inet:hostent(),
                           Reason :: inet:posix() | res_error().

Equivalent to gethostbyaddr(Address, infinity).

Link to this function

gethostbyaddr(Address, Timeout)

View Source
-spec gethostbyaddr(Address, Timeout) -> {ok, Hostent} | {error, Reason}
                       when
                           Address :: inet:ip_address(),
                           Timeout :: timeout(),
                           Hostent :: inet:hostent(),
                           Reason :: inet:posix() | res_error().

Backend function used by inet:gethostbyaddr/1.

-spec gethostbyname(Name) -> {ok, Hostent} | {error, Reason}
                       when
                           Name :: dns_name(),
                           Hostent :: inet:hostent(),
                           Reason :: inet:posix() | res_error().

Backend functions used by inet:gethostbyname/1,2.

If resolver option inet6 is true, equivalent to gethostbyname(Name, inet6, infinity), otherwise gethostbyname(Name, inet, infinity).

Link to this function

gethostbyname(Name, Family)

View Source
-spec gethostbyname(Name, Family) -> {ok, Hostent} | {error, Reason}
                       when
                           Name :: dns_name(),
                           Hostent :: inet:hostent(),
                           Family :: inet:address_family(),
                           Reason :: inet:posix() | res_error().

Equivalent to gethostbyname(Name, Family, infinity).

Link to this function

gethostbyname(Name, Family, Timeout)

View Source
-spec gethostbyname(Name, Family, Timeout) -> {ok, Hostent} | {error, Reason}
                       when
                           Name :: dns_name(),
                           Hostent :: inet:hostent(),
                           Timeout :: timeout(),
                           Family :: inet:address_family(),
                           Reason :: inet:posix() | res_error().

Backend functions used by inet:gethostbyname/1,2.

This function uses resolver option search just like getbyname/2,3.

Link to this function

lookup(Name, Class, Type)

View Source
-spec lookup(Name, Class, Type) -> [dns_data()]
                when Name :: dns_name() | inet:ip_address(), Class :: dns_class(), Type :: dns_rr_type().

Equivalent to lookup(Name, Class, Type, [], infinity).

Link to this function

lookup(Name, Class, Type, Opts)

View Source
-spec lookup(Name, Class, Type, Opts) -> [dns_data()]
                when
                    Name :: dns_name() | inet:ip_address(),
                    Class :: dns_class(),
                    Type :: dns_rr_type(),
                    Opts :: [res_option() | verbose].

Equivalent to lookup(Name, Class, Type, Opts, infinity).

Link to this function

lookup(Name, Class, Type, Opts, Timeout)

View Source
-spec lookup(Name, Class, Type, Opts, Timeout) -> [dns_data()]
                when
                    Name :: dns_name() | inet:ip_address(),
                    Class :: dns_class(),
                    Type :: dns_rr_type(),
                    Opts :: [res_option() | verbose],
                    Timeout :: timeout().

Look up DNS data.

Resolves the DNS data for the record Name of the specified Type and Class. On success, filters out the answer records with the correct Class and Type, and returns a list of their data fields. So, a lookup for type any gives an empty answer, as the answer records have specific types that are not any. An empty answer or a failed lookup returns an empty list.

Calls resolve/* with the same arguments and filters the result, so Opts is described for those functions.

Link to this function

resolve(Name, Class, Type)

View Source
-spec resolve(Name, Class, Type) -> {ok, dns_msg()} | Error
                 when
                     Name :: dns_name() | inet:ip_address(),
                     Class :: dns_class(),
                     Type :: dns_rr_type(),
                     Error :: {error, Reason} | {error, {Reason, dns_msg()}},
                     Reason :: inet:posix() | res_error().

Equivalent to resolve(Name, Class, Type, [], infinity).

Link to this function

resolve(Name, Class, Type, Opts)

View Source
-spec resolve(Name, Class, Type, Opts) -> {ok, dns_msg()} | Error
                 when
                     Name :: dns_name() | inet:ip_address(),
                     Class :: dns_class(),
                     Type :: dns_rr_type(),
                     Opts :: [Opt],
                     Opt :: res_option() | verbose | atom(),
                     Error :: {error, Reason} | {error, {Reason, dns_msg()}},
                     Reason :: inet:posix() | res_error().

Equivalent to resolve(Name, Class, Type, Opts, infinity).

Link to this function

resolve(Name, Class, Type, Opts, Timeout)

View Source
-spec resolve(Name, Class, Type, Opts, Timeout) -> {ok, dns_msg()} | Error
                 when
                     Name :: dns_name() | inet:ip_address(),
                     Class :: dns_class(),
                     Type :: dns_rr_type(),
                     Opts :: [Opt],
                     Opt :: res_option() | verbose | atom(),
                     Timeout :: timeout(),
                     Error :: {error, Reason} | {error, {Reason, dns_msg()}},
                     Reason :: inet:posix() | res_error().

Resolve a DNS query.

Resolves a DNS query for the specified Type, Class, and Name, into a DNS message possibly containing Resource Records. The returned dns_msg/0 can be examined using access functions in inet_db, as described in section in DNS Types.

If Name is an ip_address(), the domain name to query about is generated as the standard reverse ".IN-ADDR.ARPA." name for an IPv4 address, or the ".IP6.ARPA." name for an IPv6 address. In this case, you most probably want to use Class = in and Type = ptr, but it is not done automatically.

Opts overrides the corresponding resolver options. If option nameservers is specified, it is assumed that it is the complete list of name serves, so resolver option alt_nameserves is ignored. However, if option alt_nameserves is also specified to this function, it is used.

Option verbose (or rather {verbose,true}) causes diagnostics printout through io:format/2 of queries, replies, retransmissions, and so on, similar to utilities such as dig and nslookup.

Option nxdomain_reply (or rather {nxdomain_reply, true}) causes NXDOMAIN errors from DNS servers to be returned as {error, {nxdomain, dns_msg()}}. dns_msg/0 contains the additional sections that where included by the answering server. This is mainly useful to inspect the SOA record to get the TTL for negative caching.

If Opt is any atom, it is interpreted as {Opt,true} unless the atom string starts with "no", making the interpretation {Opt,false}. For example, usevc is an alias for {usevc, true} and nousevc is an alias for {usevc, false}.

Option inet6 has no effect on this function. You probably want to use Type = a | aaaa instead.